Melby mastic sealing
Looking for mastic sealing in Melby? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Repeated reactive repairs to the same buildings
- Brittle perimeter mastic across a building
- Damp patches beside frames
Mastic sealing near Melby
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle mastic sealing in Melby
Mastic Doctor has sealed joints on commercial and residential blocks since 2005. Every applicator holds a CSCS card and we hold public liability insurance. Each building we complete carries a 12-month guarantee on our workmanship. If you have a mix of products and colours from past repairs and draughts at frames across a block, we can put it right. Whether you call it commercial sealant work, mastic application or joint sealing, in Melby it comes down to the same thing: the right product in a properly prepared joint.
In smaller Scottish places like Melby, managed property is mostly small blocks, sheltered housing, hotels and community buildings. Frames on exposed elevations are where mastic typically fails first.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Where
- Melby (ZE2)
- Wider area
- Shetland Islands
- Cover
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Estate-wide resealing programmes
Housing associations and agents often manage many similar blocks. Each block is priced and scheduled in order.
Planned maintenance
Mastic wears out like any building component; how fast comes down to movement, weather, UV and the product. Regular inspection is the best way to plan resealing.
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
When to call us in Melby
Communal entrances and corridors see a lot of wear, with joints near the floor and around doors suffering most. Regular cleaning wears them further.
Typical triggers for a call:
- Movement joints with sealant missing
- Patchy repairs in mismatched sealant
- Water getting in round frames after rain
- Brittle perimeter mastic across a building
For owners and agents with buildings in or around Melby, block-wide mastic programmes deal with frames and external joints of the same age together.
Before you book anyone
- How they handle RAMS and site documents
- Which product they’ll use, and why it suits the joint
- Whether primer will be used where the manufacturer specifies it
- Their plan for phasing and protecting the area
Block-wide mastic in Melby
Melby is within about 1 mile of the coast. Sea-facing elevations take driven rain and salt, and their mastic shows it before the sheltered sides do, so it’s worth inspecting those sides more often. Melby is on Scotland’s drier eastern side. Frost and condensation on winter mornings can still delay outside mastic. We plan block programmes with some give for it
Churches, halls and community buildings such as St Margaret's Kirk and Graveyard are looked after by trustees and committees like any other owner, and their frames, doors and external joints need mastic renewed in time.
Melby is in the Shetland Islands. Our applicators travel to Melby for work on mastic joints, handled exactly as we handle every other area. We work across 63 places in the Shetland Islands, large and small.
Commercial sites across ZE2 are covered. Close to Melby, our area also takes in Sandness (1 mile south-east), Walls (6 miles south-east), Aith (10 miles east), Easter Skeld (11 miles south-east) and Brae (12 miles north-east). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or email a schedule or drawings.
Landmarks near Melby
For a walk, there’s Loch of Norby.
Leave it or put it right?
Sealing over failed mastic looks tidy for a while. It won’t grip the old sealant and soon comes away. Cutting out and resealing properly does it once. Around smaller places like Melby, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Resealing early avoids that.
Pricing mastic joints depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
Why appoint us
- Colour options checked against the specified product
- Joints cleaned back to sound surfaces
- CSCS-carded applicators
- Constructionline member
Take a look at our cost guide or how we’re accredited.
How a job runs
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For a building near Melby, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We check the asbestos register for older buildings and look at the joints.
- The products and programme are set out in a fixed quote.
- We strip out the old sealant.
- Joint faces are cleaned, backed and resealed.
- Buildings are completed in turn.
Before we start on site
- Explain the parking and delivery arrangements
- Point out any areas we must not close
- Send your site hours and access windows
Ask for a quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
What else we do in Melby
What sets the cost
Quotes vary with the job. It mainly depends on:
- The size and state of each joint
- Site requirements such as inductions and permits
- Location, for remote and island sites
- Access and working height
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Any dates the work must fit around
- A wide shot and a close-up of the area
- Access details, including height
- Approximate linear metres or a joint schedule
To get a fixed quote, phone 01277 525 020 or send details through our quote form. Our quote form is another easy route.
FAQs: Melby
Can you quote for mastic across several buildings in and around Melby?
Yes. Planned programmes across a building, block or estate are a core part of this service. Residents are given notice through you, and the work moves building by building.
Is Melby inside the area you cover, given it’s on an island?
Yes. Islands are part of our area, Melby included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.
How do you reach windows on upper floors?
We talk through access for each building when we quote. Tell us the number of storeys and whether scaffold or other access is planned and we will confirm the approach in the quote.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Is mastic sealing guaranteed?
There is a 12-month guarantee on our workmanship, backed by public liability insurance.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.