Mastic sealing for building owners and managing agents in Hungerford, Hampshire
Mastic sealing in Hungerford, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Mastic failing across several blocks on an estate
- Water getting in round frames after rain
- Draught complaints from residents or tenants
Mastic sealing in Hungerford
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our mastic sealing in Hungerford
Treatment starts with a proper look: what has failed, what caused it and whether new sealant will actually solve it. Old mastic is removed entirely, the faces prepared, primer used where the maker specifies it and new sealant tooled in, with backing rod setting the depth where it’s needed. If you have window mastic that has split and shrunk and open joints in brickwork or panels, we can put it right, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Hungerford, that means joint design, primers and backing rod as standard.
In and around smaller places like Hungerford, landlords and agents often look after small groups of housing association properties, converted farm buildings and community buildings. Frame and wall-joint mastic on all of them ages and hardens.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Hungerford (SP6)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
After the work
After handover, these steps help:
- Look at the sunniest and most exposed elevations first
- Mention RAMS, insurance or CSCS requirements up front
- Have the asbestos survey to hand for older buildings
- Check sealant joints during planned building inspections
Where a paintable product was specified, it can be painted after curing. Silicone typically can’t be painted, so keep decorators off it unless told otherwise.
Failed mastic often goes unnoticed until heavy rain finds it. Acting at the first signs keeps it a straightforward reseal and the complaints that come with it.
Questions we are asked in Hungerford
Do you cover business parks and estates near Hungerford, such as Fordingbridge Business Park?
Yes, sites like Fordingbridge Business Park are within our area, along with the rest of Hungerford. To start, just phone 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Is Hungerford too far out for you?
Not at all. Hungerford is within our area. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Do you guarantee the mastic work?
A 12-month guarantee covers our work. It covers our workmanship, not later building movement, damage or frame failures.
Can you take on resealing for a block portfolio?
Yes, block and estate work is a core part of what we do. We work through buildings in a planned order so you can plan around it.
Blocks and managed buildings in Hungerford
The South East is one of the drier parts of the UK. Outside work still depends on dry joints, and the sunniest, most exposed sides of a building normally need attention first.
Landlords with units on estates such as Fordingbridge Business Park (2.3 miles north-west of Hungerford) can bring frame, door and external mastic across several units into one programme. Historic properties like Breamore House (4.3 miles north of Hungerford) show the age of some local stock, where frame mastic must suit soft brick or stone. If you’re responsible for a building such as Church of the Holy Ascension, frame and door mastic needs the same attention as any other property.
Hungerford is in Hampshire. We send applicators to Hungerford for mastic joints, handled exactly as we handle every other area. 723 places across Hampshire fall within our area, including Hungerford. There’s a separate page for Southampton, roughly 16 miles from Hungerford.
We cover the SP6 postcode districts for mastic joints. Nearby places we also cover include Hyde (1 mile east), North Gorley (1 mile south-west), Frogham (1 mile north-east), Stuckton (1 mile north-west) and Blissford (1 mile north-east). A short drive away, we cover Totton (11 miles east), Lymington (14 miles south-east), Romsey (14 miles north-east), New Milton (12 miles south-east), Ringwood (4 miles south) and Barton on Sea (12 miles south).
Near you in Hungerford
Around Hungerford, our work takes us to commercial buildings near The Burgate School and Sixth Form and the streets around them. Nearby you will also find Godshill Castle Hill (2.4 miles north) and Fordingbridge Doll Museum (1.6 miles north-west). The countryside around Hungerford includes Linbrook Lake and Blashford Lakes.
Doing it in-house
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Towns and villages near Hungerford
What else we do in Hungerford
How the quote is worked out
To price the job, we consider:
- The site’s rules and procedures
- Location, for remote and island sites
- Which sealant the job calls for
- Access and working height
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
We can often quote from photographs and a few details. It helps to include:
- Whether an asbestos survey exists
- Access details, including height
- Any dates the work must fit around
- Clear photos of the problem areas
To get a fixed quote, speak to us on 01277 525 020 or email the details over. You can also send details through our quote form.
How a job runs
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. For a building around Hungerford, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- First comes a look at the joints and, for older buildings, the asbestos records.
- A fixed quote covers the joints, products and order of work.
- We strip out the old sealant.
- The joints are prepared and resealed with the right product.
- Buildings are completed in turn.
What we need from you
- Tell us your opening times and when work is allowed
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
Ask for a quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or send photos by email.
Related advice
Honest limits
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Misted or failed double-glazed units
- Roof leaks, gutters or failed flashings that aren’t sealant joints
- Frames that are rotten, warped or broken
If you are not sure, just ring 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Shopfronts below residential blocks
- External wall and movement joints
- Balcony and threshold joints
- Window and door perimeters on blocks
- Communal entrances and stairwells
- Communal kitchens and washrooms
How the job changes by surface
Window and door perimeters on blocks
Perimeter joints on blocks are best done elevation by elevation or block by block. Access is agreed with you before the quote is fixed.
External movement joints
The joint width has to suit the movement and the sealant’s capability with the width-to-depth ratio set as the manufacturer advises.