Industrial and floor joint sealing in Hungerford, Hampshire
Work needed on a floor joint in Hungerford? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Dock area joints that have failed first
- A rough ride across broken joints
- Brittle joint filler breaking up
Need floor joint sealing in Hungerford?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When something else is needed
Honesty saves time and money. Fresh joints won’t solve:
- Slab panels that rock or move under load
- Structural cracking in the slab
- Worn screed or surface finishes
Not sure which it is? You can speak to us on 01277 525 020 or send details through our quote form and we will tell you honestly before you book.
What we seal
- Joints along racking aisles
- Construction joints
- Retail and showroom floors
- Loading bays
- Forklift and pallet-truck routes
- Saw-cut induced joints
About our floor joint sealing in Hungerford
Forklifts and pallet trucks are hard on open joints. Every pass chips at the bare concrete edge, and over time a neat cut turns into a ragged channel. Filling the joint properly gives the edges back their support. It also smooths the route for drivers and stock. If you are dealing with trucks and loads jolting over damaged joints and saw-cut joints left open and packed with grit, we can help, on forklift and pallet-truck routes, construction joints and joints along racking aisles alike. Most enquiries from Hungerford start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Halls, schools and small commercial buildings near places like Hungerford have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Where
- Hungerford (SP6)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Looking after the joints
To get the most from the new sealant:
- Photograph any joint that starts to chip
- Plan for a top-up on newer floors
- Tell us about strong cleaning chemicals before we quote
- Treat loading bay joints first if they’re failing
A routine walk of the busiest aisles shows how the joints are holding up. Watch for filler pulling away from an edge, fresh chipping or grit collecting, and photograph anything that changes.
Every day an open joint stays full of grit, the edges take more punishment. Filling it ends that cycle while it is still a straightforward job.
Signs you need floor joint sealing in Hungerford
A slab keeps shrinking for a long time after it is cast, and saw-cut joints give that shrinkage a planned place to crack. As the panels contract, the joints widen, and a filler placed early can part company with one face.
Most enquiries start with one or more of the following:
- Dock area joints that have failed first
- Untidy open joints in a retail unit
- Old filler gone hard, cracked or loose
- Joint fill separating from the concrete
Phasing is what makes joint work possible on busy sites such as Arch Farm Industrial Estate (2.3 miles north-west of Hungerford): one bay, aisle or car park row at a time.
Comparing quotes
- Can the work be phased to keep areas open?
- Will failed sealant be removed rather than covered?
- Whether primer will be used where the manufacturer specifies it
- Their public liability cover
What affects the price in Hungerford
These are the things that shape the price:
- The product specified
- Location, for remote and island sites
- Access and working height
- Backing rod, priming and other preparation
A quote for floor joints depends on quantities, condition and access, plus any specification you are working to. Call for a quote.
What we need to price the job
A few photographs plus some basic facts will normally do. It helps to include:
- Whether the building will be occupied during the work
- Your programme or deadline
- Approximate linear metres or a joint schedule
- Clear photographs of the problem areas
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
FAQs: Hungerford
Does your area include sites such as Fordingbridge Business Park, near Hungerford?
Yes. Our area takes in Hungerford and its surroundings, with estates and business parks such as Fordingbridge Business Park included. Photos and a short description are enough for a first look.
Is hospital work, at somewhere like Fordingbridge Hospital, something you do?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators.
Is colour matching possible?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Is the floor joint work guaranteed?
Every job has our 12-month guarantee. It applies to our workmanship rather than structural movement or accidental damage.
Do you cover Hungerford?
Yes. We take on work across Hungerford.
Will we need to close the floor?
In the majority of cases, just the area being treated is coned off. Each zone reopens when the product can take traffic, then we move to the next.
Floor joint sealing in Hungerford: the local picture
The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and where de-icing salt is spread in winter, open joints let it in. Less than 3 miles from Hungerford there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Office parks like Fordingbridge Business Park, 2.3 miles north-west of Hungerford, have decks, ramps and clad elevations whose joints take movement every day. Schools like Hyde Church of England Primary School often have long brick elevations with movement joints that age quietly.
Hungerford is in Hampshire. Anywhere in SP6, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Hampshire coverage takes in 723 places. Southampton is covered too, some 16 miles away.
If you need floor joint sealing in SP6, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your building is just outside Hungerford, we cover Hyde (1 mile east), North Gorley (1 mile south-west), Frogham (1 mile north-east), Stuckton (1 mile north-west) and Blissford (1 mile north-east). Further afield, our area takes in Totton (11 miles east), Lymington (14 miles south-east), Romsey (14 miles north-east), New Milton (12 miles south-east), Ringwood (4 miles south) and Barton on Sea (12 miles south).
Around Hungerford
We work on buildings around The Burgate School and Sixth Form. Other landmarks nearby include Godshill Castle Hill (2.4 miles north) and Fordingbridge Doll Museum (1.6 miles north-west). Not far away are Linbrook Lake and Blashford Lakes.
How a job runs
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. If others near Hungerford need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
What we need from you
- Point out any areas we must not close
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Related advice
Surface by surface
Isolation joints at walls and columns
Joints around columns and along walls let the slab move without cracking against the structure. A flexible product suits them better than a stiff filler.
Forklift and pallet-truck routes
Trucks running over open joints wear wheels and shake loads. A filled joint lets wheels roll across and saves the edges.