Industrial and floor joint sealing in Wick, West Sussex
Need floor joint sealing in Wick? It’s simple: send details, get a quote, we seal, guaranteed.
- Broken arrises where pallet trucks cross
- Failing joints at loading bays and dock doors
- Flexible sealant torn out by wheels
Floor joint sealing near Wick
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
From enquiry to sign-off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For a site in Wick, we plan so the whole job is done in one go where possible. Clear photographs and measurements help us bring the right products.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Old filler, debris and contamination are cut or routed out back to clean concrete.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Warn occupants and staff about the work
- Have the specification and drawings to hand
- Explain the parking and delivery arrangements
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email a schedule or drawings with what you know.
Advice
How we handle floor joint sealing in Wick
We have been sealing commercial joints since 2005. Applicators carry CSCS cards and work to your site rules, and we are CHAS accredited and a Constructionline member holding public liability insurance. Finished floor joints in Wick carry our 12-month guarantee. If you’re dealing with a gap opening alongside old joint filler and open saw cuts full of debris, we can help, on saw-cut induced joints, construction joints and loading bays alike. A single leaking joint is often how a building in Wick first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around places the size of Wick, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Their slabs and walls still need movement joints that work.
Work we carry out in West Sussex comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or email us and we will come back to it.
- Where
- Wick (BN17)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What affects the price in Wick
Quotes vary with the job. Expect it to depend on:
- Phasing around occupants
- Backing rod, priming and other preparation
- The site’s rules and procedures
- Location, for remote and island sites
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What we need to price the job
Whether it’s one area or a whole building, these details speed things up:
- The postcode of the building
- Access details, including height
- Specification clauses that apply
- Drawings or a marked-up plan, if available
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, call the office on 01277 525 020 or send photos by email.
Slabs, ramps and loading bays in Wick
Wick is within about 2 miles of the coast. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so it pays to keep them sealed. At least three named trading, business or retail sites lie within about 3 miles of Wick. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
Schools like Lyminster Primary School often have long brick elevations with movement joints that age quietly. Large sites such as Zachary Merton Hospital (2.3 miles south-east of Wick) have car parks, service roads and long elevations with movement joints in brick and panels. If you manage units on an estate such as Lineside Road Industrial Estate, under half a mile to the south-west of Wick, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Wick is about 1 mile north-west of Littlehampton, in West Sussex. Wick sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Wick is one of 373 places we cover in West Sussex for floor joints. Our Brighton page has more on work in that area, about 18 miles away.
Anyone looking for floor joint sealing in BN17 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Joyce Close, Willow Brook and Wheatcroft, and sites on any of them can send details for a fixed quote. Being close to the B2284, Wick is straightforward for us to reach. Just outside Wick, we also work in Lyminster (1 mile north), Toddington (1 mile east), Littlehampton (1 mile south-east), Climping (1 mile south-west) and Ford (1 mile west). Nearby towns on our patch include Worthing (7 miles east), Bognor Regis (6 miles west), Chichester (10 miles west), Selsey (12 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (10 miles east).
Landmarks near Wick
Around Wick, our work takes us to commercial buildings near Littlehampton College, Locomotive Public House and The Littlehampton Academy, among other places. The nearest railway station is Littlehampton station, about 0.8 miles south. Nearby you’ll also find Zachary Merton Hospital (2.3 miles south-east) and Rustington Museum (2.1 miles south-east). The countryside around Wick includes Highdown Hill and WWT Arundel.
How the job changes by surface
Saw-cut induced joints
Sawn joints make up most of the joint length in a typical industrial floor. Each one is cleaned out and filled to the specified depth, finishing flush with the slab.
Retail and showroom floors
We plan shop-floor work so trading can continue. Give us your opening pattern and access windows and the phasing follows.
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Keep grit out of unfilled joints in the meantime
- Remind operators to lift rather than drag
- Hold traffic back until the product has cured
- Tell us about strong cleaning chemicals before we quote
A routine walk of the busiest aisles shows how the joints are holding up. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Grit in an open joint does damage every time a wheel crosses it. Filling it ends that cycle while it is still a straightforward job.
Work for main contractors and building owners
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
FAQs: Wick
Do you take on work at healthcare sites like Zachary Merton Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
Is Lineside Road Industrial Estate, near Wick, within your area?
Yes. Our area takes in Wick and its surroundings, with estates and business parks such as Lineside Road Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
How many days will you need on site?
That varies with the scale of the job, but the work normally takes a day or more, depending on the metres of joint and how many zones the floor is split into. For bigger or phased jobs, we will set out a timescale with the quote.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Why is there a gap next to the joint filler?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We look at which it is before recommending anything.
Can you fill joints where the arrises have spalled?
We check the edges as part of the survey. Damaged edges are flagged up front so the filling isn’t wasted.
Will we need to close the floor?
We phase it. We work aisle by aisle or zone by zone so the rest of the floor stays in use. Tell us your site hours and access windows and we will plan around them.
Also near Wick
What else we do in Wick
Leave it or put it right?
Painting or coating straight over joints rarely lasts. Joints need their own treatment before or alongside any coating work. For buildings in places like Wick, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
Why us?
- Clear, fixed quotes
- One number for every site we cover
- Work carried out by CSCS-carded applicators
- 12-month guarantee on workmanship
Read how commercial sealant jobs are priced and how we’re accredited.