The Mastic Doctor team standing beside their branded vans outside an office building
West Sussex · England

Industrial and floor joint sealing in West Chiltington, West Sussex

Planning work on a floor joint in West Chiltington? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Chipped and spalling edges along forklift routes
  • Old filler gone hard, cracked or loose
  • Filler that has parted from one face
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS & Constructionline
£5m public liability

Need floor joint sealing in West Chiltington?

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Site staff or a sealant specialist?

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.

Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.

About our floor joint sealing in West Chiltington

Floor joint sealing for us covers warehouse aisles, loading bays, production halls, retail floors and showroom slabs. Pricing depends on the length of joint, how worn the edges are and when we can get in and the figure is fixed before work begins. If you are dealing with soft sealant dragged out of trafficked joints and dock area joints that have failed first, we can put it right. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in West Chiltington, preparation and product choice get the time they need.

Jobs around smaller places like West Chiltington are planned so the whole job is done in one visit. Tell us the joint widths if you can, and what drives or walks over them.

Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.

The Mastic Doctor team standing beside their branded vans outside an office building
Where
West Chiltington (RH20)
Wider area
West Sussex
Guarantee
A 12-month guarantee
Price
A fixed quote before we start
Telephone
01277 525 020
Last updated
3 November 2026

Keeping the joints sound

Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:

  • Photograph any joint that starts to chip
  • Keep trucks off new joints until we say they’re ready
  • Stop forks and pallets being dragged across joints
  • Clear packed debris from open joints regularly

Problems inside the 12-month guarantee period are ours to put right. Beyond that, an inspection once or twice a year catches failing joints early.

Treating joints while the arrises are sound keeps the work simple. After the edges go, repairs come into it and that takes longer and closes areas for longer.

Where floor joints take the most wear near West Chiltington

The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. The 3 miles around West Chiltington take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.

Schools like West Chiltington Community Primary School often have long brick elevations with movement joints that age quietly. Office parks like Crays Court (business park), 1.4 miles to the east of West Chiltington, have decks, ramps and clad elevations whose joints take movement every day.

West Chiltington is about 9 miles north of Worthing, in West Sussex. We send applicators to West Chiltington for floor joints. We work across 373 places in West Sussex. Sites around Brighton have their own page, roughly 16 miles from West Chiltington.

We take on floor joints across the RH20 postcode area, for business premises of every kind. If your site is on Pond Rise, Church Street and Castle Rise or close by, we can quote for floor joints. If your building is just outside West Chiltington, we cover West Chiltington Common (1 mile south-west), Nutbourne (1 mile west), Thakeham (1 mile south-east), Abingworth (1 mile south-east) and Marehill (1 mile west). Nearby towns on our patch include Horsham (10 miles north-east), Worthing (9 miles south), Bognor Regis (15 miles south-west), Burgess Hill (14 miles east), Littlehampton (10 miles south) and Shoreham-by-Sea (11 miles south-east).

What’s near West Chiltington

Around West Chiltington, our work takes us to commercial buildings near Rydon Community College, among other places. West Chiltington’s nearest station is Pulborough station, about 3 miles west of the centre. Well-known places in the area include The Storrington And District Museum (2.5 miles south). The countryside around West Chiltington includes Amberley Wildbrooks RSPB Reserve.

Map of West Chiltington © OpenStreetMap contributors

Cost factors for floor joints

A fixed quote reflects the actual work. It allows for:

  • Travel to remote or island sites
  • Specialist products, such as fire-rated or hygienic sealants
  • Any access equipment needed
  • Whether old sealant has to be cut out first

There’s no price list, since every building and every scope is different. Call for a quote and we will price your job on its own details.

Sending details for a quote

It doesn’t need to be a full survey. A few details are enough to get going:

  • Your programme or deadline
  • Approximate linear metres or a joint schedule
  • Clear photographs of the problem areas
  • The type of building and who uses it

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email us with what you know.

What the job involves on each surface

Retail and showroom floors

In retail, joints take trolleys, castors and cleaning machines rather than forklifts. The product is chosen for that traffic and the appearance is part of the brief.

Construction joints

Day joints vary, with or without armoured edges. If the edges look unsound, we’ll say so before any filling is done.

When to call us in West Chiltington

Joints near dock doors see colder air, rain blown in and water off vehicles on top of the heaviest turning movements. They are often the first on a site to break down.

Clients typically get in touch after noticing something like this:

  • Scruffy, dirty joint lines on a shop or showroom floor
  • Saw-cut joints left open and packed with grit
  • Loading bay joints breaking down
  • Broken arrises where pallet trucks cross

Another example is Broomers Hill Business Park, which lies north-west of West Chiltington, where floors and yards would be done in stages around the occupiers.

Questions to ask before you book

  • What site paperwork they can supply
  • The terms of the workmanship guarantee
  • Are they CHAS accredited or on Constructionline?
  • How they’ll work around occupants

How to choose a sealant contractor

FAQs: West Chiltington

Will our site in West Chiltington have to close for joint sealing?

Rarely. Work is phased around your operations. The phasing plan comes with the quote.

Is a smaller place like West Chiltington outside your area?

Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.

Is the floor joint work guaranteed?

Every job has our 12-month guarantee. It applies to our workmanship rather than structural movement or accidental damage.

What site paperwork can you supply?

Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.

Can you follow the specification on our project?

Yes. Send it with your enquiry, and we will price the work to it, flagging anything that needs clarifying.

Why is there a gap next to the joint filler?

On newer slabs, the concrete keeps shrinking after the joints are filled and a stiff filler can separate down one side. It is typically dealt with by topping up.

Who decides which product is used?

Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.

On site: what to expect

Working in a building that stays open takes some planning. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. For a building around West Chiltington, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.

  1. A floor survey records every joint, its edges and what crosses it.
  2. The treatment and the zones are set out in a fixed quote.
  3. Old fill and packed debris come out until both faces are sound.
  4. We extract the dust and prime the faces if the product needs it.
  5. The joint is filled to its specified depth and trimmed level.
  6. We hand each phase back when it can take traffic.

Getting the site ready

  • Make sure the joints can be reached
  • Tell us what induction or permit system the site runs
  • Arrange parking or a loading space

Quotes

If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.

Ask for a quote

Read more

Accreditations

Trusted. Accredited. Insured.