Industrial and floor joint sealing in Abingworth, West Sussex
Floor joint sealing and filling in warehouses, factories and industrial units in Abingworth. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Old filler gone hard, cracked or loose
- Drivers complaining about joints on a route
- Flexible sealant torn out by wheels
Need floor joint sealing in Abingworth?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing around Abingworth: points for this area
At about 41 miles from central London, Abingworth is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors. Less than 3 miles from Abingworth there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Parks like Crays Court (business park), 1 mile to the north-east of Abingworth, combine paved areas, car parks and building elevations, each with joints that move. In a school such as Thakeham Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Abingworth is about 8 miles north of Worthing, in West Sussex. We cover commercial sites throughout Abingworth, for single jobs and planned programmes alike. Our West Sussex coverage takes in 373 places, large and small. Sites around Brighton have their own page, roughly 15 miles from Abingworth.
We cover the RH20 postcode districts. We cover commercial and managed buildings on Abingworth Crescent, Chestnut Drive and Shelley Place. Close to Abingworth, our area also takes in Thakeham (1 mile north-east), Warminghurst (1 mile east), Heath Common (1 mile south-east), West Chiltington Common (1 mile west) and West Chiltington (1 mile north-west). A short drive away, we cover Horsham (10 miles north-east), Worthing (8 miles south), Bognor Regis (15 miles south-west), Haywards Heath (15 miles east), Burgess Hill (13 miles east) and Littlehampton (10 miles south-west).
Near you in Abingworth
We work on buildings around Rydon Community College, among other places. For rail, the closest station is Pulborough station, about 3.9 miles west of the centre. Other landmarks nearby include The Storrington And District Museum (1.6 miles south-west). Open spaces near Abingworth include Amberley Wildbrooks RSPB Reserve and Chanctonbury Hill.
How we handle floor joint sealing in Abingworth
A working floor can rarely be closed for days on end, so we phase the work aisle by aisle or bay by bay. Share your site hours and access windows and the programme is built around them, with goods still moving in the areas we aren’t in. The enquiries we see most involve cracked and crumbling joint fill and broken arrises where pallet trucks cross, across loading bays, retail and showroom floors and saw-cut induced joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Abingworth, preparation and product choice get the time they need.
Smaller community and commercial buildings around Abingworth have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Abingworth (RH20)
- Wider area
- West Sussex
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Isolation joints at walls and columns
Perimeter and column joints get forgotten, and they collect dust and debris. We include them in the survey.
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They can move more than saw cuts, and that shapes the product choice.
FAQs: Abingworth
Do we have to stop operations in Abingworth while the joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Is Crays Court (business park), near Abingworth, within your area?
Yes, sites like Crays Court (business park) are within our area, along with the rest of Abingworth. Photos and a short description are enough for a first look.
How many days will you need on site?
It depends on the scope, but the work usually takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we will set out a timescale with the quote.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, which many sites require.
Owners, agents and contractors
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
How a job runs
Working in a building that stays open takes some planning. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. If others near Abingworth need work, visits can be combined. You’ll have a fixed quote before work starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
What we need from you
- Flag any permit to work we will need
- Clear stock, furniture or equipment away from the joints
- Agree which areas must stay open
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Read more
What sets the cost
The price varies from site to site. It mainly depends on:
- Working within restricted access windows
- Removal of failed or old sealant
- Access and working height
- Travel to remote or island sites
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Before you send an enquiry
The more we know, the firmer the quote. Helpful details to send:
- Access details, including height
- Where the site is, with the postcode
- When you need the work done
- A wide shot and a close-up of the area
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call 01277 525 020 or use the quote form if you’d rather talk the job through.
Towns and villages near Abingworth
Other services in Abingworth
Common problems we fix in Abingworth
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Where a joint is open, the wheel dips and strikes the far edge, and repeated impacts break the concrete away.
It’s worth sending us details if you spot any of the following:
- A rough ride across broken joints
- Chipped and spalling edges along forklift routes
- Unfilled floor joints collecting dirt and grit
- Cracked and crumbling joint fill
Phasing is what makes joint work possible on busy sites such as Wiston Business Park (1.7 miles south-east of Abingworth): one bay, aisle or car park row at a time.
What your quote should include
- How they handle RAMS and site documents
- What the guarantee covers, and for how long
- Are they CHAS accredited or on Constructionline?
- Do they follow the manufacturer’s priming guidance?
What sealant work can’t fix
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Cracks across panels caused by settlement or overload
- Spalled arrises, which need an edge repair first
- A failing floor coating, which is a flooring contractor’s job
If you are not sure, just call the office on 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
What we seal
- Saw-cut induced joints
- Construction joints
- Loading bays
- Retail and showroom floors
- Forklift and pallet-truck routes
- Joints along racking aisles