Floor Joint Sealing contractors in Selkirk
Floor joint sealing and filling in warehouses, factories and industrial units throughout Selkirk and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- A rough ride across broken joints
- Joint edges breaking up under truck wheels
- Unfilled floor joints collecting dirt and grit
Need floor joint sealing in Selkirk?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Selkirk, done properly
It isn’t only heavy industry. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, where a gappy, dirty joint looks untidy and snags castors. A flush, well-finished joint tidies the whole floor. We work on construction joints, joints along racking aisles and loading bays, and the usual reasons a site gets in touch are grimy joint lines spoiling a showroom floor and old filler gone hard, cracked or loose. Whoever orders the work in Selkirk, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
Travel to smaller places like Selkirk is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Selkirk (TD7)
- Wider area
- Scottish Borders
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Damaged or worn floor coatings and screeds
- Wide or random cracking that suggests a structural issue
- Slab panels that rock or move under load
If you are not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
What we seal
- Construction joints
- Loading bays
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Joints along racking aisles
- Retail and showroom floors
FAQs: Selkirk
Will our site in Selkirk have to close for joint sealing?
Usually not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
Would you work within a site like Borders General Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
What do you need from us to quote?
Send details through our quote form or by email, with the traffic on each area. A fixed quote follows with the product and phasing set out.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
How soon can traffic go back on the floor?
Each product has its own cure time and cooler floors take longer. Phasing is planned with that in mind.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Floor joint sealing around Selkirk: points for this area
The east of Scotland, where Selkirk is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Sealing them in drier months limits winter damage.
Schools such as Selkirk High School have movement joints in their walls and floors that are easy to overlook. Hospital campuses such as Borders General Hospital (to the north-east of Selkirk) grow in stages, leaving movement joints wherever new blocks meet old.
Selkirk is about 5 miles south of Galashiels, in the Scottish Borders. If you are looking for floor joint sealing in Selkirk, we can help. Selkirk is one of 91 places we cover in the Scottish Borders. Edinburgh is covered too, some 31 miles away.
Work on floor joints is covered throughout TD7. Streets here include High Street, Market Place and Station Road. Main routes into Selkirk include the A7 and A707. If your building is just outside Selkirk, we cover Boleside (3 miles north-east), Midlem (4 miles east), Broadmeadows (4 miles west), Ashkirk (4 miles south) and Yarrowford (4 miles west). A short drive away, we cover Galashiels (5 miles north), Hawick (9 miles south), Peebles (15 miles north-west), Jedburgh (12 miles south-east), Wilton (9 miles south) and Innerleithen (10 miles north-west). Selkirk ranks among the main centres of the Scottish Borders, with offices, shops, schools and other public and commercial buildings.
What’s near Selkirk
In Selkirk, that means premises near Town Arms Inn, among other places. The nearest railway station is Galashiels station, about 5 miles north. Nearby you’ll also find Borders General Hospital (5 miles north-east) and Peel Hill (under half a mile south). Green spaces nearby include Hare and Dunhog Mosses and Haining Loch.
What the job involves on each surface
Saw-cut induced joints
Open saw cuts collect grit and break at the arris. Filling them early keeps them tidy and protects the edges.
Retail and showroom floors
Retail work is phased around trading. Give us your opening pattern and access windows and the phasing follows.
Looking after the joints
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Put loading bays at the top of the list
- Stop forks and pallets being dragged across joints
- Plan for a top-up on newer floors
- Keep photographs of joints that look like they’re failing
Walk the main truck routes every few months and look along the joint lines. Look for separation down one side, new chips in the arris and debris gathering, and photograph anything that changes.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas and keeps on top of the rest.
Common problems we fix in Selkirk
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Crossing an open joint, the wheel drops and knocks the opposite arris and those knocks chip the edge apart bit by bit.
What tends to prompt an enquiry:
- Filler that has parted from one face
- A rough ride across broken joints
- Loading bay joints breaking down
- Saw-cut joints left open and packed with grit
A campus such as Heriot-Watt University - Scottish Borders Campus, 4.6 miles to the north-east of Selkirk, has long runs of movement joint in its buildings, decks and paving.
Questions to ask before you book
- Are they CHAS accredited or on Constructionline?
- Their plan for phasing and protecting the area
- Do they follow the manufacturer’s priming guidance?
- How the existing material will be dealt with
Places near Selkirk
Also in Selkirk
From enquiry to sign-off
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Travel to smaller Scottish places like Selkirk is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Before we start on site
- Warn occupants and staff about the work
- Send your site hours and access windows
- Send asbestos survey details if the building is pre-2000
Quotes
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email us.