Industrial and floor joint sealing in Hawick, Scottish Borders
Need floor joint sealing in Hawick? It’s simple: send details, get a quote, we seal, guaranteed.
- Untidy open joints in a retail unit
- Broken arrises where pallet trucks cross
- Brittle joint filler breaking up
Floor joint sealing across Hawick
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our floor joint sealing in Hawick
Concrete floors in warehouses and factories are cut into bays by saw-cut joints and construction joints, and each joint line is a weak edge that wheels run over all day. We fill or seal them with a product matched to the traffic and the movement so the edges are held up and debris can’t pack in. We work on loading bays, construction joints and retail and showroom floors, and the failures we’re asked to look at most are unfilled floor joints collecting dirt and grit and filler that has parted from one face. One point of contact handles commercial sealant work in Hawick from the first photos to the final walk-round, whether it’s one building or several.
Schools, health centres and council buildings in towns like Hawick have long runs of brick and panel movement joints. Resealing them before water gets in protects the wall behind.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Where
- Hawick (TD9)
- Region
- Scottish Borders
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. In a Scottish town such as Hawick, outside work is planned around the weather and inside work around the occupants. Send photos or drawings and we will quote and plan to suit.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- Each phase reopens when the product is ready for wheels, then we start the next.
What we need from you
- Confirm the product named in the specification
- Make sure the joints can be reached
- Flag any permit to work we’ll need
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Read more
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Keep trucks off new joints until we say they’re ready
- Keep photographs of joints that look like they’re failing
- Clear packed debris from open joints regularly
- Mention any aggressive cleaning regime at quote stage
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. It is a known trait of new floors and a later top-up deals with it in the majority of cases.
Every day an open joint stays full of grit, the edges take more punishment. Filling it ends that cycle while it is still a straightforward job.
Different surfaces, different methods
Semi-rigid joint fillers
A semi-rigid filler is stiff enough to hold the arrises up when wheels cross. They allow only small movement, so they suit joints where most shrinkage has already happened.
Isolation joints at walls and columns
We plan column and wall joints around racking and fixed plant so nothing has to move unexpectedly.
Site staff or a sealant specialist?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Traffic, movement and joints around Hawick
Being in the east of Scotland, Hawick gets less rain than the west coast. Cold winters and gritting are hard on any yard or deck joint left open. Resealing before the cold months helps protect the edges. The 3 miles around Hawick take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Office parks like Annfield Business Centre (less than half a mile north of Hawick) have decks, ramps and clad elevations whose joints take movement every day. For an estate such as Hawick Community Hospital, which lies west of Hawick, the joints in ramps, decks and long building elevations all need attention over time.
Hawick is in the Scottish Borders. Any commercial site in Hawick is covered, whether it’s a single job or part of a planned programme. Hawick is one of 91 places in the Scottish Borders on our list for floor joints. Edinburgh is covered too, around 39 miles from Hawick.
We take on floor joints across the TD9 postcode area, whatever the building. Among the streets we cover are High Street, Drumlanrig Square and Teviot Crescent, and sites on any of them can send details for a fixed quote. Being close to the A7 and A698, Hawick is easy to get to with materials and equipment. If your building is just outside Hawick, we cover Wilton (1 mile west), Stirches (1 mile north-west), Wilton Dean (1 mile west), Burnfoot (1 mile north-east) and Newmill (4 miles south-west). Further afield, our area takes in Galashiels (13 miles north), Selkirk (9 miles north), Jedburgh (10 miles east), Melrose (12 miles north), Earlston (15 miles north) and Langlee (13 miles north). Among the larger centres in the Scottish Borders is Hawick, and its commercial and public buildings are all within our area.
Landmarks near Hawick
Locally, jobs take us to sites close to The Bourtree pub. Nearby you will also find Borders Textile Towerhouse (under half a mile south) and Hawick Community Hospital (less than half a mile west). Open spaces near Hawick include Ashkirk Hill and Williestruther Loch.
Common questions from Hawick clients
Do you cover business parks and estates near Hawick, such as Annfield Business Centre?
Yes. Our area takes in Hawick and its surroundings, with estates and business parks such as Annfield Business Centre included. A few photos and the unit address let us price the work.
Does a site in Hawick have to shut while its joints are sealed?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
What guarantee do you give on joint filling?
A 12-month guarantee covers the work we do. It applies to our workmanship rather than structural movement or accidental damage.
How long before trucks can use the joints?
Each product has its own cure time, and cold floors slow it down. Phasing is planned with that in mind.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can you fill joints where the arrises have spalled?
Filling against broken edges doesn’t last. If the arrises have spalled, we will say they need repair before filling and set out how that affects the job.
Do you cover Hawick?
Yes. Sites across Hawick are covered, with one number for every area we cover.
What else we do in Hawick
What we’re called out for in Hawick
Soft sealant in a heavily trafficked joint gives the edges little support and the edges fail regardless. The opposite mistake happens as well: a stiff filler in a joint that keeps moving splits or comes away from the sides.
Look out for the following:
- Sealant pulled out along a truck route
- A gap opening alongside old joint filler
- Trucks and loads jolting over damaged joints
- Old filler gone hard, cracked or loose
Schools like Hawick High School often have long brick elevations with movement joints that age quietly.
What to look for in a quote
- Their pre-qualification and accreditations
- How they’ll work around occupants
- Is the sealant right for the movement and the substrate?
- What the guarantee covers, and for how long
What happens if it’s left?
A floor coating laid over open joints soon cracks along the joint lines. The joints have to be filled or sealed as joints, whether or not the floor is coated. In Hawick, rain and frost work into any failed joint, and the damage spreads from there. Catch it early and it stays a sealant job.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why appoint us
- Fully insured, including public liability cover
- One number for every site we cover
- Workmanship guaranteed for 12 months
- Constructionline member
Read how commercial sealant jobs are priced and our accreditations and insurance.