Floor Joint Sealing contractors in Rudmore
Floor joint sealing for Rudmore, from a contractor working since 2005. Fully insured and CHAS accredited.
- A gap opening alongside old joint filler
- Sealant pulled out along a truck route
- Joint edges breaking up under truck wheels
Floor joint sealing across Rudmore
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floors, slabs and movement joints in Rudmore
Rudmore sits close to the coast, within about 1 mile. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. Rudmore lies roughly 64 miles out from central London. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day.
Schools like The Flying Bull Academy often have long brick elevations with movement joints that age quietly. Places like Victory Retail Park (to the south-west of Rudmore) put trolleys over floor joints inside and cars over slab joints outside.
Rudmore is about 1 mile north-west of Portsmouth, in Portsmouth. Commercial clients in Rudmore can call on us for floor joints, as part of our coverage of Portsmouth. Our Portsmouth coverage takes in 19 places, large and small.
Work on floor joints is covered throughout PO2 and PO1, for business premises of every kind. We cover commercial and managed buildings on Knox Road, Wharf Road and Croft Road and the roads nearby. Main routes into Rudmore include the M275 and A2047. Nearby places we also cover include North End (1 mile north-east), Tipner (1 mile north-west), Portsmouth (1 mile south-east), Landport (1 mile south) and Copnor (1 mile east).
Around Rudmore
Recent enquiries here include premises near Alexandra Park, The Admiral Drake pub and Mayfield School and the streets around them. The nearest railway station is Portsmouth & Southsea station, about 1.1 miles south. Well-known places in the area include Tricorn Centre (0.8 miles south) and Portchester Castle (2.1 miles north-west). Open spaces near Rudmore include Milton Locks and Portsdown Hill.
About our floor joint sealing in Rudmore
Few warehouses can shut a whole floor while joints are done, so we phase the work aisle by aisle or bay by bay. Tell us your site hours and access windows and we will plan around them so the rest of the operation keeps going. Site teams most often ask us about chipped and spalling edges along forklift routes and trucks and loads jolting over damaged joints, across forklift and pallet-truck routes, construction joints and saw-cut induced joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Rudmore it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around Rudmore, most floor and movement joint jobs are single buildings or yards. Getting widths, depths and traffic details up front means one visit, not two.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Where
- Rudmore (PO2, PO1)
- Region
- Portsmouth
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Common problems we fix in Rudmore
A slab keeps shrinking for a long time after it is cast, and the saw cuts are there so it cracks in straight, controlled lines. As the panels contract, the joints widen, and a filler placed early can part company with one face.
Clients usually get in touch after noticing one or more of the following:
- Flexible sealant torn out by wheels
- Broken arrises where pallet trucks cross
- Unfilled floor joints collecting dirt and grit
- Trucks and loads jolting over damaged joints
Across sites such as Copnor Bridge Business Centre, 0.9 miles to the south-east of Rudmore, floor and movement joints can be sealed in phases so units keep working.
Before you book anyone
- Whether their applicators hold CSCS cards
- What site paperwork they can supply
- Whether old or failed sealant will be cut out, not overlaid
- Their pre-qualification and accreditations
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Structural cracking in the slab
- Level or flatness problems across the floor
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
If you’re not sure, just ring 01277 525 020 or send photos by email and we will give you a straight answer.
What we seal
- Construction joints
- Joints along racking aisles
- Forklift and pallet-truck routes
- Loading bays
- Retail and showroom floors
- Saw-cut induced joints
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Which sealant the job calls for
- How much existing material needs removing
- Working within restricted access windows
- Any access equipment needed
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- The postcode of the building
- Approximate linear metres or a joint schedule
- Whether the building will be occupied during the work
- Specification clauses that apply
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or send details through our quote form to discuss it first.
More services for Rudmore
How a job runs
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. For a job in Rudmore, the main thing is a clear picture of the work. You will then get a fixed price for the work.
- First, the zones and order of work are agreed with you.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- You get a time for each zone to reopen.
Getting the site ready
- Tell us what induction or permit system the site runs
- Explain the parking and delivery arrangements
- Confirm the product named in the specification
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Common questions from Rudmore clients
Is a smaller place like Rudmore outside your area?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you take on a job at a hospital such as St James Hospital?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
How long does a job like this take?
That varies with the scale of the job, but the work usually takes a day or more, depending on the metres of joint and how many zones the floor is split into. For bigger or phased jobs, we’ll set out a timescale with the quote.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards.
Are you insured?
Yes. We are fully insured, and the certificate can go with your quote.
Surface by surface
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Closed-cell backing rod goes in first, keeping the bead shallow and gripping only the two faces.
Retail and showroom floors
We plan shop-floor work so trading can continue. Tell us your site hours and access windows and we will plan around them.