The Mastic Doctor team standing beside their branded vans outside an office building
Moray · Scotland

Floor Joint Sealing contractors in Portgordon

Work needed on a floor joint in Portgordon? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Broken arrises where pallet trucks cross
  • Flexible sealant torn out by wheels
  • Brittle joint filler breaking up
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
Covering the South East & Scotland
Constructionline member
Fully insured: £5m PL

Floor joint sealing near Portgordon

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

What sets the cost

What shapes the price:

  • Access and working height
  • Travel to remote or island sites
  • The site’s rules and procedures
  • Backing rod, priming and other preparation

Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.

What to include in your enquiry

It doesn’t need to be a full survey. A few details are enough to get going:

  • Access details, including height
  • The product your specification calls for
  • A wide shot and a close-up of the area
  • Rough lengths or quantities, or drawings if you have them

Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, call the office on 01277 525 020 or email us.

Floor joint sealing in Portgordon, done properly

We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get and the figure is fixed before work begins. We work on joints along racking aisles, saw-cut induced joints and construction joints, and the failures we are asked to look at most are dock area joints that have failed first and grimy joint lines spoiling a showroom floor. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Portgordon is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.

Around smaller Scottish places like Portgordon, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.

What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Portgordon (AB56)
Wider area
Moray
Guarantee
12 months on our workmanship
Quotes
A fixed quote before we start
Phone
01277 525 020
Page updated
3 November 2026

Our process

Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Portgordon, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.

  1. We walk the floor and mark up joint widths, edge damage and traffic routes.
  2. You receive a fixed quote showing products and phasing.
  3. Old fill and packed debris come out until both faces are sound.
  4. We extract the dust and prime the faces if the product needs it.
  5. Filler or sealant is placed to depth and finished flush.
  6. We hand each phase back when it can take traffic.

Before we start on site

  • Share the asbestos register for older buildings
  • Clear stock, furniture or equipment away from the joints
  • Agree which areas must stay open

Quotes

For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. You can also send details through our quote form.

Get a quick quote

Related advice

Why it’s worth doing now in Portgordon

Waiting for a site-wide shutdown often means the joints keep getting worse. Phased in zones, the busiest routes can be treated first while the rest of the floor carries on. Renewing every failing joint on one visit is the sensible approach for a place like Portgordon. Photos of each area help us quote the whole job.

Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.

Why appoint us

  • Fully insured
  • One contact handling all your sites
  • A Constructionline member, so easy to vet
  • Workmanship guaranteed for 12 months

See our cost guide or our accreditations.

Surface by surface

Construction joints

Where a day joint crosses a truck route, its edges take heavy punishment. We look at how much they are moving before choosing the treatment.

Saw-cut induced joints

Induced joints are sawn into a new slab to control where it cracks. They start narrow and widen as the concrete dries, and on truck routes they need a filler that supports the edges.

What we are called out for in Portgordon

Loading bay joints are exposed to wind, wet tyres and bigger temperature swings on top of the heaviest turning movements. That is usually where joint failure starts.

Look out for the following:

  • Failing joints at loading bays and dock doors
  • Sealant pulled out along a truck route
  • Open saw cuts full of debris
  • Broken arrises where pallet trucks cross

Estates like March Road Industrial Estate (to the east of Portgordon) combine warehouse slabs, yards and loading bays, all with joints under wheels.

Questions to ask before you book

  • How they’ll work around occupants
  • Their approach to joint depth and backing
  • How the existing material will be dealt with
  • Will RAMS and insurance details be available?

Our contractor checklist

Questions we are asked in Portgordon

Is Portgordon too far out for you?

No. Places such as Portgordon are covered as much as the big towns. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.

Does your area include sites such as March Road Industrial Estate, near Portgordon?

Yes. We cover Portgordon and the area around it, including industrial estates, business parks and retail parks such as March Road Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.

When is resealing likely to be due?

There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.

Is colour matching possible?

It depends on the product specified. Some ranges are wide, others limited, so we will confirm the colours available for the specified product with the quote.

Can you send site paperwork?

Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.

Will you just go over the old sealant?

No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.

Do you guarantee industrial floor joints?

Every job has our 12-month guarantee. It covers our workmanship, not later slab movement or damage from impacts.

Floors, slabs and movement joints in Portgordon

Portgordon sits close to the coast, within about 1 mile. Open joints in coastal car parks and yards let in salt-laden water as well as grit, which is why split joints are worth sealing before the edges deteriorate. The east of Scotland, where Portgordon is, gets less rain than the west. Frost and de-icing salt still find their way into open external joints. Sealing them before winter limits the damage.

In a school such as Buckie High School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Hospital campuses such as Seafield Hospital, 1.3 miles to the east of Portgordon, grow in stages, leaving movement joints wherever new blocks meet old.

Portgordon is about 2 miles south-west of Buckie, in Moray. If you’re looking for floor joint sealing in Portgordon, we can help. Portgordon is one of 59 places we cover in Moray for floor joints. Our Aberdeen page has more on work in that area (48 miles or so).

Anyone looking for floor joint sealing in AB56 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Station Road, Richmond Terrace and Crown Terrace. Sites close to Portgordon are covered too, including Arradoul (1 mile east), Buckie (2 miles north-east), Upper Dallachy (2 miles south-west), Nether Dallachy (2 miles west) and Bogmoor (2 miles west). Bigger towns within reach include Elgin (11 miles west), Lossiemouth (11 miles west), Keith (9 miles south), Ashgrove (11 miles west), Portknockie (6 miles north-east) and Cullen (8 miles east). Where a site is remote or on an island, we plan travel and materials carefully, so include the location in your enquiry.

What’s near Portgordon

Well-known places in the area include Gordon Castle (3.9 miles south-west) and Seafield Hospital (1.4 miles east). Not far away are The Lake.

Map of Portgordon © OpenStreetMap contributors

Site staff or a sealant specialist?

Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

Accreditations

Trusted. Accredited. Insured.