The Mastic Doctor team standing beside their branded vans outside an office building
Surrey · England

Floor Joint Sealing in Pitch Place

Floor joint sealing and filling in warehouses, factories and industrial units in Pitch Place. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.

  • Loading bay joints breaking down
  • Chipped and spalling edges along forklift routes
  • Open saw cuts full of debris
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
CHAS accredited
£5m PL insurance

Floor joint sealing for Pitch Place sites

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Common questions from Pitch Place clients

Is Pitch Place too far out for you?

No. Places such as Pitch Place are covered as much as the big towns. We cover Greater London and the counties of the South East. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.

Can you take on a job at a hospital such as Haslemere and District Hospital?

Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.

Do you repair broken joint edges?

We check the edges as part of the survey. Where they have broken away, we’ll tell you before quoting the filling so the filling isn’t wasted.

Does the weather affect the work?

It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Do you hold CHAS accreditation?

Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.

Why is there a gap next to the joint filler?

Young concrete carries on shrinking for a long time, so a semi-rigid filler can part from one face. A top-up normally puts it right.

Can you phase floor joint work around operations?

Usually only the zone we are working in has to close. Each zone reopens when the product can take traffic, then we move to the next.

Floor joint sealing in Pitch Place

Some joints reach us with their edges already broken. Filling against a crumbled arris won’t hold for long, so we will tell you if the joint edges need repairing first and leave that decision with you. The enquiries we see most involve open saw cuts full of debris and joint edges breaking up under truck wheels, across construction joints, saw-cut induced joints and loading bays. Whoever orders the work in Pitch Place, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

In and around smaller places like Pitch Place, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.

Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Pitch Place (GU8)
Region
Surrey
Guarantee
12 months on our workmanship
Price
A fixed quote before we start
Phone
01277 525 020
Last updated
3 November 2026

When to bring in a specialist

For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.

On site: what to expect

A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes a day for smaller units, with bigger warehouse floors programmed over several visits, and our waste is bagged and taken away as we go. Jobs in and around smaller places like Pitch Place are typically planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.

  1. We walk the floor and mark up joint widths, edge damage and traffic routes.
  2. The treatment and the zones are set out in a fixed quote.
  3. Old fill and packed debris come out until both faces are sound.
  4. We extract the dust and prime the faces if the product needs it.
  5. The joint is filled to its specified depth and trimmed level.
  6. Zones reopen once cured and the work moves on.

Getting the site ready

  • Clear stock, furniture or equipment away from the joints
  • Agree which areas must stay open
  • Have the specification and drawings to hand

Request a quote

We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email a schedule or drawings.

Ask for a quote

Advice

What sealant work can’t fix

Being straight saves everyone time. New sealant won’t cure:

  • A floor that is out of level for the racking or trucks
  • Worn screed or surface finishes
  • Cracks across panels caused by settlement or overload

If you’re not sure, just give us a call on 01277 525 020 or email drawings and photos and we will give you a straight answer.

Joints and surfaces we work on

  • Forklift and pallet-truck routes
  • Saw-cut induced joints
  • Construction joints
  • Retail and showroom floors
  • Joints along racking aisles
  • Loading bays

Slabs, ramps and loading bays in Pitch Place

Central London is about 37 miles from Pitch Place. The South East has large numbers of industrial estates and warehouses along the motorway corridors. Pitch Place sits in one of the drier corners of the country, the South East. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open.

In and around Pitch Place, the right filler or sealant for each joint depends on the traffic and the movement it takes. Hospitals like Haslemere and District Hospital (3.9 miles south of Pitch Place) have multi-storey or surface car parks whose joints carry vehicles round the clock.

Pitch Place is about 5 miles south-east of Farnham, in Surrey. We cover commercial sites throughout Pitch Place. Across Surrey, 379 places are covered, including Pitch Place. We also cover Reading, some 23 miles away.

We cover the GU8 postcode districts for floor joints. Sites close to Pitch Place are covered too, including Thursley (1 mile east), Rushmoor (1 mile north-west), Green Cross (2 miles south-west), Beacon Hill (2 miles south-west) and Tilford Common (2 miles north-west). Bigger towns within reach include Guildford (10 miles north-east), Woking (13 miles north-east), Camberley (13 miles north), Farnham (5 miles north-west), Frimley (11 miles north) and Haslemere (4 miles south).

Landmarks near Pitch Place

In Pitch Place, that means premises near Three Horseshoes pub and The Flashes and the streets around them. The closest station to Pitch Place is Witley station, about 3.6 miles east. Other landmarks nearby include Haslemere and District Hospital (3.9 miles south). The countryside around Pitch Place includes Gibbet Hill and Farnham Heath.

Map of Pitch Place © OpenStreetMap contributors

How the quote is worked out

There’s no standard rate for sealant work, since sites vary so much. What we look at:

  • The total length or number of joints
  • Travel to remote or island sites
  • Whether old sealant has to be cut out first
  • Backing rod, priming and other preparation

Pricing floor joints depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.

What we need to price the job

Good information means a firmer quote. When you get in touch, include:

  • Where the site is, with the postcode
  • Whether an asbestos survey exists
  • Rough lengths or quantities, or drawings if you have them
  • Photos of the joints, close up and from further back

Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.

Work for main contractors and building owners

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.

CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.

Why deal with it now?

Every jolt over a broken joint passes into the truck, the load and the driver. That means extra wear on wheels and a rougher ride for staff, which nobody budgets for. A properly filled joint smooths the route. Halls, stores and units around places like Pitch Place may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.

No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.

Why us?

  • 12-month guarantee on workmanship
  • One contact handling all your sites
  • CSCS-carded applicators
  • Constructionline member

Read our cost guide and how we’re accredited.

Accreditations

Trusted. Accredited. Insured.