Floor Joint Sealing contractors in Pickhurst
Need floor joint sealing in Pickhurst? It’s simple: send details, get a quote, we seal, guaranteed.
- Sealant pulled out along a truck route
- Old filler gone hard, cracked or loose
- Trucks and loads jolting over damaged joints
Floor joint sealing near Pickhurst
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle floor joint sealing in Pickhurst
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and the business is CHAS accredited and a Constructionline member, with public liability insurance in place. Completed joints come with a 12-month guarantee on our workmanship. If you’re dealing with failing joints at loading bays and dock doors and grimy joint lines spoiling a showroom floor, we can put it right. For commercial sealant work in Pickhurst, you deal with one contact from quote to sign-off, whether it’s one building or several.
Around smaller places such as Pickhurst, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Pickhurst (RH20)
- Wider area
- West Sussex
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Joints that move: notes for Pickhurst
Less than 3 miles from Pickhurst there are two named estates and business parks. Their warehouses, yards and car parks are exactly where joints take the most punishment. The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint.
For buildings at a park such as Broomers Hill Business Park, which lies east of Pickhurst, brick and panel movement joints are easy to forget until one leaks. Across sites such as Station Approach Industrial Estate (1.4 miles south of Pickhurst), floor and movement joints can be sealed in phases so units keep working.
Pickhurst is about 11 miles south-west of Horsham, in West Sussex. Looking for floor joint sealing in Pickhurst? We can help. Across West Sussex, 373 places are covered, including Pickhurst. Brighton is covered too, some 20 miles away.
We cover the RH20 postcode districts for floor joints. Sites close to Pickhurst are covered too, including Pulborough (1 mile south-east), Bedham (2 miles west), Hardham (2 miles south), Fittleworth (2 miles south-west) and Lower Horncroft (3 miles south-west). Further afield, our area takes in Horsham (11 miles north-east), Worthing (12 miles south-east), Bognor Regis (15 miles south-west), Chichester (15 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (15 miles south-east).
Around Pickhurst
The nearest railway station is Pulborough station, roughly 1.4 miles south of the centre. Nearby you will also find Coates Castle (3.6 miles south-west). Green spaces nearby include The Mens.
Commercial clients in Pickhurst
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Surface by surface
Flexible floor sealants
Movement joints, joints at walls and joints in lightly trafficked areas often take a flexible sealant. Backing rod limits how deep the bead goes and keeps it off the joint bottom.
Retail and showroom floors
Polished and coated concrete floors in shops and showrooms show every joint. We aim for a tidy, flush finish that suits the floor, and we’ll confirm the colours available for the specified product.
How a job runs
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs in and around smaller places like Pickhurst are normally planned as a single visit, so we ask for photos and rough sizes first. Then the right materials arrive with us.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
What we need from you
- Tell staff and tenants when we’ll be in
- Clear stock, furniture or equipment away from the joints
- Send any specification or drawings in advance
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or send details through our quote form.
Read more
What affects the price in Pickhurst
A fixed quote reflects the actual work. It takes account of:
- The total length or number of joints
- Induction, permit and paperwork requirements
- The product specified
- Joint width, depth and condition
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Details that help us quote
Good information means a firmer quote. Helpful details to send:
- The product your specification calls for
- The type of building and who uses it
- Photos of the joints, close up and from further back
- Any dates the work must fit around
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Pickhurst: questions and answers
Is Broomers Hill Business Park, near Pickhurst, within your area?
Yes. We cover Pickhurst and the area around it, including industrial estates, business parks and retail parks such as Broomers Hill Business Park. To start, just speak to us on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Pickhurst too far out for you?
No. Places such as Pickhurst are covered as much as the big towns. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
Should floor joints be filled or sealed?
There isn’t one answer for a whole floor. Where hard wheels cross, a semi-rigid filler is normally right and perimeter or movement joints need flexibility. You’ll see the choice for each area in the quote.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators.
Is colour matching possible?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Does weather matter for sealant work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Keeping the joints sound
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Clear packed debris from open joints regularly
- Let us know what the floor is cleaned with
- Keep photographs of joints that look like they’re failing
- Hold traffic back until the product has cured
Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so we choose something that tolerates them.
Edges tend to break slowly at first, then quickly. Once the first piece is out, wheels drop further and hit harder, so it pays to act at the first signs.
When it isn’t the sealant
Honesty saves time and money. New sealant won’t cure:
- Level or flatness problems across the floor
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
- A floor that rocks at the joints, which needs a structural fix
Not sure which it is? You can call the office on 01277 525 020 or send details through our quote form and we will tell you honestly.
Where we work in Pickhurst
- Joints along racking aisles
- Retail and showroom floors
- Construction joints
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Loading bays