Floor Joint Sealing in Bedham
Looking for floor joint sealing in Bedham? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Broken arrises where pallet trucks cross
- Saw-cut joints left open and packed with grit
- Cracked and crumbling joint fill
Need floor joint sealing in Bedham?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Bedham
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and we are CHAS accredited and a Constructionline member, with public liability insurance in place. Finished floor joints in Bedham carry our 12-month guarantee. Most enquiries involve soft sealant dragged out of trafficked joints and broken arrises where pallet trucks cross, across saw-cut induced joints, forklift and pallet-truck routes and construction joints. Most enquiries from Bedham start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Jobs around smaller places like Bedham are planned so the whole job is done in one visit. Tell us the joint widths if you can, and what drives or walks over them.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Location
- Bedham (RH20)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
Honesty saves time and money. Fresh joints won’t solve:
- Broken concrete either side of the joint
- A floor that is out of level for the racking or trucks
- A failing floor coating, which is a flooring contractor’s job
If you’re not sure, just ring 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Loading bays
- Joints along racking aisles
- Saw-cut induced joints
- Construction joints
- Retail and showroom floors
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Work for main contractors and building owners
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, with CSCS-carded applicators on site.
What else we do in Bedham
Cost factors for floor joints
The price varies from site to site. It mainly depends on:
- Site requirements such as inductions and permits
- The size and state of each joint
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
We don’t publish prices, since every building and every scope is different. Call for a quote.
Sending details for a quote
It doesn’t need to be a full survey. A few details are enough to get going:
- What the building is and how it’s used
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
- The postcode of the building
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Common questions from Bedham clients
Is a smaller place like Bedham outside your area?
Not at all. Bedham is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Does a site in Bedham have to shut while its joints are sealed?
Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we’ll plan from there.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Is the floor joint work guaranteed?
Our workmanship carries a 12-month guarantee, and we hold public liability insurance.
Are you fully insured?
Yes. We’re fully insured, and the certificate can go with your quote.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
After the work
A few simple habits keep the new joints working:
- Ask drivers not to drag forks or pallets
- Expect fillers on young slabs to need a top-up
- Clear packed debris from open joints regularly
- Keep photographs of joints that look like they’re failing
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is normally dealt with by topping up once the slab has settled down in the majority of cases.
Joint damage starts slowly and then speeds up. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.
From enquiry to sign-off
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Jobs in and around smaller places like Bedham are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Preparing the site
- Arrange parking or a loading space
- For older buildings, check the asbestos register before work
- Let us know about inductions and permits
Getting a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or speak to us on 01277 525 020 or use the quote form if you’d rather talk the job through.
Advice
Joints that move: notes for Bedham
Bedham has at least three named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Bedham lies roughly 42 miles out from central London. The roads out of London are lined with trade parks and distribution sheds.
For a school such as Fittleworth CofE Village School, playground and building joints can be done in the holidays. At places like Hampers Common Industrial Estate, which lies north-west of Bedham, joints are sealed a section at a time so operations carry on. Warehouse floors on estates like Station Approach Industrial Estate (to the south-east of Bedham) carry pallet trucks and forklifts over every saw-cut joint.
Bedham is about 6 miles south-west of Billingshurst, in West Sussex. Our applicators travel to Bedham for work on floor joints, handled exactly as we handle every other area. Bedham is one of 373 places in West Sussex on our list for floor joints. Brighton is covered too, around 21 miles from Bedham.
Postcode districts covered here: RH20 for floor joints. If your site is on Bedham Lane, Upper Street and Stretch Hill or close by, we can quote for floor joints. Just outside Bedham, we also work in Fittleworth (1 mile south), Lower Horncroft (1 mile south), Coates (1 mile south-west), Pickhurst (2 miles east) and Hardham (2 miles south-east). A short drive away, we cover Horsham (12 miles north-east), Worthing (12 miles south-east), Bognor Regis (14 miles south-west), Chichester (13 miles south-west), Littlehampton (11 miles south) and Lancing (14 miles south-east).
Around Bedham
In Bedham, that means premises near The Swan Hotel. The closest station to Bedham is Pulborough station, roughly 2.1 miles south-east. Nearby you will also find Coates Castle (1.9 miles south-west) and Coultershaw Heritage Site (2.5 miles west). Green spaces nearby include The Mens and Bignor Hill.