Industrial and floor joint sealing in Perry, Kent
Planning work on a floor joint in Perry? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Broken arrises where pallet trucks cross
- Saw-cut joints left open and packed with grit
- Trucks and loads jolting over damaged joints
Floor joint sealing near Perry
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Site staff or a sealant specialist?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Floor joint sealing in Perry
For sites in Perry and across Kent, the process is short: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photos and a floor plan are enough for a quick quote and a visit can be arranged where that is easier. Site teams most often ask us about old filler gone hard, cracked or loose and chipped and spalling edges along forklift routes, across joints along racking aisles, construction joints and saw-cut induced joints. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Perry is the same: the right product in a properly prepared joint.
Jobs around smaller places like Perry are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.
Every job we finish is backed by a 12-month workmanship guarantee, in Perry as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Perry (CT3)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What we’re called out for in Perry
Concrete slabs shrink as they dry out, and the saw cuts are there so it cracks in straight, controlled lines. As the panels contract, the joints widen so a filler put in early may separate along one side.
Most enquiries start with one or more of the following:
- Trucks and loads jolting over damaged joints
- Unfilled floor joints collecting dirt and grit
- Broken arrises where pallet trucks cross
- Joint fill separating from the concrete
For an estate such as St Martins Hospital, which lies west of Perry, the joints in ramps, decks and long building elevations all need attention over time.
What your quote should include
- How they’ll work around occupants
- What site paperwork they can supply
- Will failed sealant be removed rather than covered?
- Proof of insurance
When it isn’t the sealant
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Wide or random cracking that suggests a structural issue
- A failing floor coating, which is a flooring contractor’s job
- Uneven floors that need grinding or levelling
If you are not sure, just ring 01277 525 020 or email drawings and photos and we will give you a straight answer before you book.
Joints and surfaces we work on
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Loading bays
- Saw-cut induced joints
- Retail and showroom floors
How a job runs
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Perry may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Before we start on site
- Warn occupants and staff about the work
- Agree which areas must stay open
- Send asbestos survey details if the building is pre-2000
Quotes
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or email a schedule or drawings.
Read more
Questions we are asked in Perry
Can you work at a site such as Wingham Industrial Estate, by Perry?
Yes. Estates, retail parks and business parks around Perry, Wingham Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Would you work within a site like St Martins Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How soon can traffic go back on the floor?
Cure times vary with the product and the conditions. We will give you a time for each zone when we agree the phasing.
How do we get a quote for floor joints?
A rough joint length, a few photographs and a site plan are normally enough for a quick quote. We can visit where that helps, and you can ring 01277 525 020 or email a schedule or drawings to arrange it.
What guarantee do you give on joint filling?
A 12-month guarantee covers the work we do. It covers our workmanship, not later slab movement or damage from impacts.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Cost factors for floor joints
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- Joint width, depth and condition
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- Whether the work must be split into stages
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a quote when you’re ready.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- Specification clauses that apply
- Access details, including height
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to call 01277 525 020 or email us.
What the job involves on each surface
Forklift and pallet-truck routes
Truck routes take traffic all day, so their joints wear fastest. Semi-rigid fillers are widely used on these routes to hold the edges up.
Loading bays and dock areas
Joints at dock doors need a product that copes with the traffic and the conditions. Phasing is planned around your delivery schedule.
Joints that move: notes for Perry
Perry is about 59 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift. The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints.
Warehouse floors on estates like Wingham Industrial Estate, 1.5 miles to the south-west of Perry, carry pallet trucks and forklifts over every saw-cut joint. In a school such as Preston Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Perry is about 7 miles east of Canterbury, in Kent. Anywhere in CT3, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across Kent, 931 places are covered, including Perry. Sites around London have their own page, about 59 miles away.
Commercial sites across CT3 are covered. If your site is on Walmestone Road and Perry Lane or close by, send details and we’ll quote for floor joints. If your building is just outside Perry, we cover Nash (1 mile east), Shatterling (1 mile south), Hoaden (1 mile east), Elmstone (1 mile north) and Broomhill (1 mile south-west). Further afield, our area takes in Canterbury (7 miles west), Margate (9 miles north-east), Dover (11 miles south), Folkestone (14 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
What’s near Perry
For rail, the closest station is Adisham station, roughly 3.6 miles south-west. A little further out are St Martins Hospital (5.6 miles west). For a walk, there’s Monk's Wall nature reserve.