Industrial and floor joint sealing in Broomhill, Kent
Floor joint sealing and filling in warehouses, factories and industrial units in Broomhill and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Filler that has parted from one face
- Brittle joint filler breaking up
- Failing joints at loading bays and dock doors
Floor joint sealing near Broomhill
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Slabs, ramps and loading bays in Broomhill
Broomhill is about 59 miles from central London. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day. Rainfall across the South East, Broomhill included, is lower than in many parts of the UK. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints.
Schools such as Wingham Primary School have movement joints in their walls and floors that are easy to overlook. For an estate such as St Martins Hospital (4.8 miles west of Broomhill), the joints in ramps, decks and long building elevations all need attention over time. If you manage units on an estate such as Wingham Industrial Estate, 0.8 miles south of Broomhill, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Broomhill is about 6 miles east of Canterbury, in Kent. Our applicators travel to Broomhill for work on floor joints. We work across 931 places in Kent, from busy centres to rural villages. For work in that direction, see our London page, about 59 miles away.
If you need floor joint sealing in CT3, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Wenderton Lane, North Court Road and Miles Court are within our area. Sites close to Broomhill are covered too, including Wingham (1 mile south), Shatterling (1 mile east), Well Head (1 mile south), Perry (1 mile north-east) and Wingham Green (1 mile south-west). A short drive away, we cover Canterbury (6 miles west), Margate (10 miles north-east), Dover (10 miles south), Folkestone (14 miles south), Ramsgate (9 miles north-east) and Broadstairs (11 miles north-east).
Near you in Broomhill
We work on buildings around The Red Lion pub and the streets around them. Broomhill’s nearest station is Adisham station, roughly 2.7 miles south. Nearby you’ll also find St Martins Hospital (4.8 miles west). Not far away are Monk's Wall nature reserve.
Floor joint sealing for commercial buildings in Broomhill
It isn’t only heavy industry. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, where a gappy, dirty joint looks untidy and snags castors. A flush, well-finished joint tidies the whole floor. We work on retail and showroom floors, saw-cut induced joints and loading bays, and the usual reasons a site gets in touch are loading bay joints breaking down and filler that has parted from one face. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Broomhill is the same: the right product in a properly prepared joint.
Smaller community and commercial buildings around Broomhill have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or email us and we will come back to it.
- Location
- Broomhill (CT3)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
- Wide or random cracking that suggests a structural issue
- A failing floor coating, which is a flooring contractor’s job
If in doubt, ring 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
What we seal
- Saw-cut induced joints
- Construction joints
- Joints along racking aisles
- Loading bays
- Retail and showroom floors
- Forklift and pallet-truck routes
Surface by surface
Retail and showroom floors
Retail joints see trolleys, footfall and scrubber-driers. The product is chosen for that traffic and the finish matters as much as the performance.
Construction joints
Construction joints, sometimes called day joints, mark where one pour ended and the next began. They often see more movement than sawn joints, and that shapes the product choice.
Work for main contractors and building owners
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Why it’s worth doing now in Broomhill
While the arrises are intact, filling a joint is straightforward. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled, with longer closures to match. For buildings around smaller places like Broomhill, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Why choose Mastic Doctor in Broomhill
- Sealing commercial buildings since 2005
- Our applicators hold CSCS cards
- Fully insured
- CHAS accredited
See our cost guide and our accreditations.
FAQs: Broomhill
Do you cover business parks and estates near Broomhill, such as Wingham Industrial Estate?
Yes. Estates, retail parks and business parks around Broomhill, Wingham Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Would you work within a site like St Martins Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Why has the filler pulled away from one side?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is normally dealt with by topping up.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How do we get a quote for floor joints?
A rough joint length, a few photographs and a site plan let us give a quick quote. For larger floors, a site visit is often best, and you can call the office on 01277 525 020 or email us to arrange it.
Should floor joints be filled or sealed?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is normally right, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Our process
Tell us your site hours and access windows and we’ll plan around them. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. If others near Broomhill need work, visits can be combined. A fixed quote is given before anything starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- A fixed quote follows, listing the treatment for each area and the order of work.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- Each phase reopens when the product is ready for wheels, then we start the next.
Getting the site ready
- Arrange parking or a loading space
- Send any specification or drawings in advance
- Tell us what induction or permit system the site runs
Request a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to phone 01277 525 020 or send details through our quote form.
Advice
Looking after the joints
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Walk the main routes and inspect joint lines on a regular cycle
- Let us know what the floor is cleaned with
- Hold traffic back until the product has cured
- Clear packed debris from open joints regularly
Dragged forks and pallets gouge joints and edges alike. Steel tines will mark a good joint over time if it keeps happening.
While the concrete edges are intact, it’s a filling job. After the edges go, repairs come into it, with more downtime and more disruption.