Over Wallop floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units across Over Wallop, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unfilled floor joints collecting dirt and grit
- Joint fill separating from the concrete
- Dock area joints that have failed first
Floor joint sealing for businesses in Over Wallop
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be one of these:
- A failing floor coating, which is a flooring contractor’s job
- Broken concrete either side of the joint
- Cracks across panels caused by settlement or overload
If you’re not sure, just ring 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Where we work in Over Wallop
- Retail and showroom floors
- Construction joints
- Loading bays
- Forklift and pallet-truck routes
- Saw-cut induced joints
- Joints along racking aisles
Floor joint sealing for commercial buildings in Over Wallop
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so we’ll tell you if the joint edges need repairing first and leave that decision with you. We work on retail and showroom floors, joints along racking aisles and loading bays, and the failures we are asked to look at most are chipped and spalling edges along forklift routes and cracked and crumbling joint fill. Whether you call it commercial sealant work, mastic application or joint sealing, in Over Wallop it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a site near Over Wallop, measurements and photos up front mean one trip where possible, with the right materials on hand. Note joint widths and the traffic that uses them, and we’ll take it from there.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Over Wallop (SO20)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Over Wallop
More services for Over Wallop
Do you need floor joint sealing in Over Wallop?
Concrete slabs shrink as they dry out, and saw-cut joints give that shrinkage a planned place to crack. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
Site and facilities staff are often the first to spot these:
- Chipped and spalling edges along forklift routes
- Saw-cut joints left open and packed with grit
- Trucks and loads jolting over damaged joints
- Filler that has parted from one face
For a school such as Wallop Primary School, playground and building joints can be done in the holidays.
Questions to ask before you book
- Do they follow the manufacturer’s priming guidance?
- Which product they’ll use, and why it suits the joint
- Will failed sealant be removed rather than covered?
- The terms of the workmanship guarantee
Where floor joints take the most wear near Over Wallop
Over Wallop is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. At about 69 miles from central London, Over Wallop is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London.
Around Over Wallop, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Over Wallop is about 7 miles south-west of Andover, in Hampshire. Commercial clients in Over Wallop use us for work on floor joints. We work across 723 places in Hampshire. Our Southampton page has more on work in that area (18 miles or so).
Work on floor joints is covered throughout SO20, for business premises of every kind. For a building on Station Road, King Lane and King Lane Cottages or nearby, send details and we’ll quote for floor joints. Close to Over Wallop, our area also takes in Middle Wallop (1 mile south-east), Kentsboro (2 miles north-east), Nether Wallop (2 miles south-east), Fox (3 miles north) and Amport (4 miles north). Nearby towns on our patch include Winchester (13 miles south-east), Andover (7 miles north-east), Chandler's Ford (14 miles south-east), Romsey (12 miles south-east), Hyde (13 miles south-east) and Tidworth (7 miles north-west).
Landmarks near Over Wallop
We work on buildings around The White Hart Inn, among other places. For rail, the closest station is Grateley station, about 2 miles north-west of the centre. Green spaces nearby include Winterbourne Downs RSPB reserve and Quarley Hill.
Work for main contractors and building owners
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Over Wallop can sit alongside others in a wider programme.
Questions we’re asked in Over Wallop
What documents will you need to give us for a job in Over Wallop?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Do we have to stop operations in Over Wallop while the joints are sealed?
Normally not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Do you use semi-rigid filler or flexible sealant on floor joints?
We decide joint by joint. Hard wheels need edge support, which points to a semi-rigid filler and perimeter or movement joints need flexibility. The quote sets out what goes where.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
Leave it or put it right?
Dirt and spillage gather in open joints where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. One visit to deal with every failing joint makes more sense than several trips to a place like Over Wallop, rather than one at a time. Photos of every joint help us quote for the whole job.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- One number for every site we cover
- Our applicators hold CSCS cards
- Sealing commercial buildings since 2005
- Failed material removed, not covered up
Read what affects the cost and our accreditations and insurance.
Surface by surface
Isolation joints at walls and columns
Isolation joints separate the slab from walls, columns and plinths so it can move independently. Something flexible normally suits them, not a stiff filler.
Forklift and pallet-truck routes
Truck routes take traffic all day and the joints on them break down first. A semi-rigid filler is common here because it supports the arrises under hard wheels.
From enquiry to sign-off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before we move to the next. For a building around Over Wallop, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
What we need from you
- Make sure the joints can be reached
- Tell staff and tenants when we will be in
- Agree which areas must stay open
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photos and a description will do.