Monxton floor joint sealing
Commercial sealant work in Monxton for contractors, FMs and building owners: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.
- Loading bay joints breaking down
- Scruffy, dirty joint lines on a shop or showroom floor
- Soft sealant dragged out of trafficked joints
Floor joint sealing near Monxton
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Record damaged joints with a photo and a location
- Clear packed debris from open joints regularly
- Remind operators to lift rather than drag
- Keep trucks off new joints until we say they’re ready
If a joint we filled starts to break up within 12 months, tell us and we’ll arrange a look. After that, a check before your busiest period keeps small repairs small.
Every day an open joint stays full of grit, the edges take more punishment. Getting it filled stops the damage while it is still a straightforward job.
Floor joint sealing in Monxton
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Our CSCS-carded applicators follow your site induction and rules, and the business is CHAS accredited and a Constructionline member, with public liability insurance in place. Completed joints come with a 12-month guarantee on our workmanship. If you have broken arrises where pallet trucks cross and joint fill separating from the concrete, we can put it right. A single leaking joint is often how a building in Monxton first comes to us: we look at the rest while we are there and tell you what we find.
Halls, schools and small commercial buildings near places like Monxton have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Where
- Monxton (SP11)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What affects the price in Monxton
To price the job, we consider:
- Which sealant the job calls for
- Working within restricted access windows
- Travel to remote or island sites
- Backing rod, priming and other preparation
A quote for floor joints depends on how many there are, their condition and the access, plus any specification you are working to. Ask us for a fixed quote.
Before you send an enquiry
Diagnosis starts before we arrive. Tell us:
- Specification clauses that apply
- Rough lengths or quantities, or drawings if you have them
- Photos of the joints, close up and from further back
- How the joints are reached, and at what height
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or send details through our quote form.
Also near Monxton
More services for Monxton
Floors, slabs and movement joints in Monxton
The 3 miles around Monxton take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Monxton sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and gritting in cold spells finds its way into open joints.
Hospitals like Andover War Memorial Hospital (to the north-east of Monxton) have multi-storey or surface car parks whose joints carry vehicles round the clock. Phasing is what makes joint work possible on busy sites such as Andover Business Park (1.4 miles north-east of Monxton): one bay, aisle or car park row at a time. For a school such as Amport Church of England Primary School, playground and building joints can be done in the holidays.
Monxton is about 3 miles west of Andover, in Hampshire. Commercial clients in Monxton can call on us for floor joints. Across Hampshire, 723 places are covered, Monxton among them. There’s a separate page for Southampton, about 21 miles away.
We cover the SP11 postcode districts. Among the streets we cover are High Street, Green Lane and Abbotts Ann Road, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Amport (1 mile west), Abbotts Ann (1 mile south-east), Fox (1 mile south-west), Little Ann (2 miles south-east) and Anna Valley (2 miles east). Bigger towns within reach include Winchester (14 miles south-east), Andover (3 miles east), Romsey (14 miles south), Hyde (14 miles south-east), Tidworth (6 miles north-west) and Weeke (13 miles south-east).
Local landmarks in Monxton
Locally, jobs take us to sites close to The Black Swan Public House and John Hanson Community School. Monxton’s nearest station is Andover station, about 2.8 miles east. Other landmarks nearby include Andover Museum (3.4 miles east) and Andover War Memorial Hospital (2.8 miles north-east). The countryside around Monxton includes Anton Lakes and Mill Lake.
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Worn screed or surface finishes
- Spalled arrises, which need an edge repair first
- A floor that is out of level for the racking or trucks
Not sure which it is? You can call the office on 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Where we work in Monxton
- Joints along racking aisles
- Construction joints
- Loading bays
- Saw-cut induced joints
- Retail and showroom floors
- Forklift and pallet-truck routes
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes anything from a day for one loading bay to several days for a large floor, split into phases, and we clear our waste as we work. Smaller jobs around Monxton can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Old fill and packed debris come out until both faces are sound.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Preparing the site
- Tell us your opening times and when work is allowed
- Send asbestos survey details if the building is pre-2000
- Agree which areas must stay open
Get a fixed quote
For a fixed quote, call 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. Our quote form is another easy route.
Advice
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
FAQs: Monxton
Is hospital work, at somewhere like Andover War Memorial Hospital, something you do?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Is Plot 5 Andover Business Park, near Monxton, within your area?
Yes, sites like Plot 5 Andover Business Park are within our area, along with the rest of Monxton. Photos and a short description are enough for a first look.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Are you CHAS accredited?
Yes. We are CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can the sealant be colour-matched?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What do you need from us to quote?
Use our quote form, or email photographs and a plan, with the traffic on each area. A fixed quote follows that shows the products and zones.
Different surfaces, different methods
Saw-cut induced joints
Induced joints are sawn into a new slab to control where it cracks. They start narrow and widen as the concrete dries so trafficked runs need a filler that holds the arrises.
Semi-rigid joint fillers
A semi-rigid fill can separate along one side while a slab is still shrinking. That is normally dealt with by topping up later and we will flag it at quote stage.