Industrial and floor joint sealing in Old Town, East Sussex
Work needed on a floor joint in Old Town? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Scruffy, dirty joint lines on a shop or showroom floor
- A gap opening alongside old joint filler
- Cracked and crumbling joint fill
Floor joint sealing in Old Town
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
After the work
Regular inspection catches problems early. Specifically:
- Tell us about strong cleaning chemicals before we quote
- Walk the main routes and inspect joint lines on a regular cycle
- Put loading bays at the top of the list
- Respect the cure time before traffic returns
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is typically dealt with by topping up once the slab has settled down.
Treating joints while the arrises are sound keeps the work simple. Once they have broken away, edge repair comes first, with more downtime and more disruption.
Floor joint sealing in Old Town, done properly
Before quoting, we look at what the floor is telling us: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. From that we choose between a semi-rigid filler and a more flexible sealant and the answer can differ from one zone to the next. We work on forklift and pallet-truck routes, construction joints and joints along racking aisles, and the usual reasons a site gets in touch are old filler gone hard, cracked or loose and untidy open joints in a retail unit. Facilities teams, main contractors and managing agents in Old Town tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around Old Town, most floor and movement joint jobs are single buildings or yards. Getting widths, depths and traffic details up front means one visit, not two.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Old Town (BN21, BN20, BN22)
- Wider area
- East Sussex
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Leave it or put it right?
An open joint is a modest filling job while its edges are sound. Left until they break, it needs an edge repair before any filling can start, with longer closures to match. Small buildings around Old Town suffer from failed joints as much as large ones. Early resealing avoids the damage that follows a leak.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why us?
- CHAS accredited contractor
- Fixed quotes based on photographs, drawings or a visit
- Work carried out by CSCS-carded applicators
- Public liability insurance in place
Read how commercial sealant jobs are priced and our accreditations.
Your questions answered
Does your area include sites such as Courtlands Road Industrial Estate, near Old Town?
Yes. Estates, retail parks and business parks around Old Town, Courtlands Road Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Do you take on work at healthcare sites like Eastbourne District General Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Do you repair broken joint edges?
Edge condition is recorded when we look at the floor. Where they have broken away, we will tell you before quoting the filling, so nothing is filled that won’t hold.
Why is there a gap next to the joint filler?
It can be shrinkage, contamination on the joint faces or a product unsuited to the movement. We diagnose the cause before suggesting a fix.
Should floor joints be filled or sealed?
It depends on the traffic and the movement. Trafficked joints on truck routes typically need a semi-rigid filler to support the edges, while joints that move more take a flexible sealant.
Can you work to our specification?
Yes. Send it with your enquiry, and we’ll price the work to it, flagging anything that needs clarifying.
Floor joint sealing around Old Town: how the place shapes the job
The sea is no more than about 2 miles from Old Town. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. At least three named trading, business or retail sites lie within about 3 miles of Old Town. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Centres like Hampden Park Retail Park (to the north-east of Old Town) have mall floors and service decks whose joints carry steady traffic. Another example is Hampden Park Industrial Estate (1.7 miles north-east of Old Town), where floors and yards would be done in stages around the occupiers. Campuses like University of Brighton Eastbourne Campus (to the south of Old Town) mix old and new buildings, with movement joints wherever they meet.
Old Town is about 1 mile south-west of Eastbourne, in East Sussex. Commercial clients in Old Town can call on us for floor joints, as part of our coverage of East Sussex. Old Town is one of 308 places we cover in East Sussex. Our Brighton page has more on work in that area (18 miles or so).
Postcode districts covered here: BN21, BN20 and BN22. Among the streets we cover are Love Lane, Mill Road and Greys Road, and sites on any of them can send details for a fixed quote. We also cover Upperton (1 mile east), Meads (1 mile south), Eastbourne (1 mile north-east), Holywell (1 mile south) and Ratton Village (1 mile north) for floor joints. Further afield, our area takes in Hastings (15 miles north-east), Bexhill-on-Sea (10 miles north-east), Seaford (7 miles west), Lewes (13 miles north-west), Hailsham (6 miles north) and St Leonards (14 miles north-east).
Around Old Town
Around Old Town, our work takes us to commercial buildings near Motcombe Infants' School, Gildrege Park and WMG Academy for Young Engineers, among other places. Old Town’s nearest station is Eastbourne station, about 0.7 miles east of the centre. Other landmarks nearby include Eastbourne District General Hospital (1 mile north) and Pevensey Castle (4.4 miles north-east). Open spaces near Old Town include Combe Hill.
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
What sets the cost
To price the job, we consider:
- Joint width, depth and condition
- Travel to remote or island sites
- Phasing around occupants
- How much there is to seal
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
What to include in your enquiry
However big the job, the same details help:
- Specification clauses that apply
- The postcode of the building
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to ring 01277 525 020 or email drawings and photos with what you know.
From enquiry to sign-off
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Several jobs near Old Town can be grouped on one trip. Tell us your site hours and we will plan around them.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- We fill the joints with the agreed product, finished level.
- You get a time for each zone to reopen.
Getting the site ready
- For older buildings, check the asbestos register before work
- Confirm the product named in the specification
- Let building users know which areas are affected
Getting a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email a schedule or drawings.
Read more
Towns and villages near Old Town
What else we do in Old Town
Doing it in-house
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.