Industrial and floor joint sealing in North Street, Kent
Floor joint sealing for North Street, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Chipped and spalling edges along forklift routes
- Cracked and crumbling joint fill
- Unfilled floor joints collecting dirt and grit
Floor joint sealing across North Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing for commercial buildings in North Street
Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so we’ll tell you if the joint edges need repairing first and leave that decision with you. We work on forklift and pallet-truck routes, construction joints and saw-cut induced joints, and the usual reasons a site gets in touch are cracked and crumbling joint fill and drivers complaining about joints on a route. A specialist sealant contractor works differently from a general builder: on jobs in North Street, preparation and product choice get the time they need.
Jobs around smaller places like North Street are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Where
- North Street (ME13)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When to call us in North Street
Oil, laitance, dust and old cleaning chemicals build up inside joints. If the faces aren’t taken back to clean concrete first the new filler can’t stay bonded.
These are often picked up first by site or facilities staff:
- Broken arrises where pallet trucks cross
- Failing joints at loading bays and dock doors
- Filler that has parted from one face
- Drivers complaining about joints on a route
In and around North Street, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Comparing quotes
- Their approach to joint depth and backing
- Their plan for phasing and protecting the area
- How the existing material will be dealt with
- Which product they’ll use, and why it suits the joint
Should maintenance staff do it?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What happens if it’s left?
Broken joints shake trucks, stock and operators alike. That means extra wear on wheels and a rougher ride for staff, adding costs nobody plans for. A filled joint takes most of that out. For buildings around smaller places like North Street, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
What you get with us
- Specification-led, product-correct work
- Fully insured, including public liability cover
- One contact handling all your sites
- Fixed quotes based on photographs, drawings or a visit
Read how commercial sealant jobs are priced or our accreditations.
Nearby places to North Street
More services for North Street
Floors, slabs and movement joints in North Street
At about 45 miles from central London, North Street is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift. North Street sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
For a school such as Sheldwich Primary School, playground and building joints can be done in the holidays.
North Street is about 2 miles south of Faversham, in Kent. We cover commercial sites throughout North Street, whether it’s a single job or part of a planned programme. We work across 931 places in Kent, large and small. Our London page has more on work in that area, about 45 miles away.
Work on floor joints is covered throughout ME13, for business premises of every kind. Close to North Street, our area also takes in Sheldwich (1 mile south), Sheldwich Lees (1 mile south), Painter's Forstal (1 mile north-west), Badlesmere (2 miles south) and Throwley (2 miles south-west). Further afield, our area takes in Ashford (10 miles south), Canterbury (8 miles east), Sittingbourne (8 miles north-west), Whitstable (8 miles north-east), Herne Bay (12 miles north-east) and Minster (10 miles north).
What’s near North Street
Around North Street, our work takes us to commercial buildings near The Abbey School and the streets around them. The nearest railway station is Faversham station, roughly 1.8 miles north. Other landmarks nearby include Newnham Castle (3.7 miles west).
North Street: questions and answers
What documents will you need to give us for a job in North Street?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We’re CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Will our site in North Street have to close for joint sealing?
Usually not: we work in sections and hand each one back once it has cured. Tell us which hours and entrances we can use and we’ll plan from there.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Can you work to our specification?
Yes. Send it with your enquiry, and we will price the work to it.
Which is better for warehouse joints, filler or sealant?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is typically right and perimeter or movement joints need flexibility. You’ll see the choice for each area in the quote.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Building owners, agents and FMs in North Street
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We are fully insured, and our insurance certificate can go with the quote.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Quoting for work in North Street
The price varies from site to site. Expect it to depend on:
- Joint width, depth and condition
- Distance, for remote addresses
- Whether old sealant has to be cut out first
- Induction, permit and paperwork requirements
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Sending details for a quote
A few photos plus some basic facts will normally do. It helps to include:
- What the building is and how it’s used
- Whether an asbestos survey exists
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
How a job runs
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. For work around North Street, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Warn occupants and staff about the work
- Have the specification and drawings to hand
Get a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or email us.