Coloured and colour-matched sealant in North Street, Kent
Coloured sealant for North Street, from a contractor working since 2005. Fully insured and CHAS accredited.
- Hotel refurbishments with a set colour scheme
- Discoloured joints on a visible elevation
- Coloured joints that have cracked with movement
Coloured sealant for businesses in North Street
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Coloured sealant in North Street, done properly
Architects, designers and brand teams often specify the sealant colour as carefully as the finishes around it. Most sealant types are made in a broad range of standard colours, so we check what the specified product is made in before we quote. An exact bespoke match can’t always be promised, so we talk you through the nearest colours. If you have white or grey sealant that clashes with the finish and failed coloured sealant that has split or peeled, we can help. Whether you call it commercial sealant work, mastic application or joint sealing, in North Street it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In and around smaller places such as North Street, the commercial buildings we are asked about are often pubs, shops, village halls and barns converted to offices. Each has kitchens, washrooms and frames whose joints need renewing in time.
Every job we finish is backed by a 12-month workmanship guarantee, in North Street as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- North Street (ME13)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we’re called out for in North Street
Joints repaired piecemeal often end up in several shades. Mixed repairs over time leave a run of mismatched joints. Doing the full run in a single colour solves it.
These are often picked up first by site or facilities staff:
- Standard-colour sealant spoiling a high-end finish
- Stained or mouldy coloured joints in washrooms
- Old colour-matched joints lifting at the edges
- Poorly tooled joints on visible finishes
In hotels such as Premier Inn Faversham Hotel, 1.3 miles to the north of North Street, refurbishments usually mean bathroom, bar and reception joints where a matched sealant colour has to sit with the finishes.
Before you book anyone
- How joint depth will be controlled
- How long is the guarantee, and what does it include?
- How the joint faces will be prepared and primed
- What site paperwork they can supply
Nearby places to North Street
Also in North Street
Site staff or a sealant specialist?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
For managing agents and facilities managers
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. North Street can form part of a wider programme.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Why it’s worth doing now in North Street
Agreeing the colour before work starts avoids paying twice. A short trial bead costs very little. Converted and older buildings near places like North Street tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- Old sealant cut out, never sealed over
- Colours confirmed for the specified product
- CHAS accredited
- A fixed quote before work starts
Take a look at what affects the cost or how we’re accredited.
Coloured sealant around North Street: how the place shapes the job
A number of hotels sit less than 2 miles from North Street. Hotel refurbishments are where a matched sealant colour earns its place: bathroom, bar and reception joints have to sit with the finishes. North Street sits in one of the drier corners of the country, the South East. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it.
Premises within reach of Faversham station, 1.8 miles north of North Street, often have busy frontages where joints are seen by everyone passing.
North Street is about 2 miles south of Faversham, in Kent. We cover commercial sites throughout North Street, for single jobs and planned programmes alike. North Street is one of 931 places we cover in Kent. For work in that direction, see our London page (45 miles or so).
We take on colour-matched joints across the ME13 postcode area, whatever the building. Close to North Street, our area also takes in Sheldwich (1 mile south), Sheldwich Lees (1 mile south), Painter's Forstal (1 mile north-west), Badlesmere (2 miles south) and Throwley (2 miles south-west). A short drive away, we cover Ashford (10 miles south), Canterbury (8 miles east), Sittingbourne (8 miles north-west), Whitstable (8 miles north-east), Herne Bay (12 miles north-east) and Minster (10 miles north).
Local landmarks in North Street
Recent enquiries here include premises near The Abbey School, among other places. The nearest railway station is Faversham station, about 1.8 miles north. Other landmarks nearby include Newnham Castle (3.7 miles west).
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If others near North Street need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We start with photographs, drawings or a visit to see the finishes.
- Colour options from the specified product’s range are shared with you.
- Tell us your site hours and access windows and we’ll plan around them.
- We prepare each joint, prime where needed and fit backing.
- The agreed colour is installed and tooled neatly.
Before we start on site
- Point out any areas we must not close
- Have the specification and drawings to hand
- Share the asbestos register for older buildings
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or call the office on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Read more
Different surfaces, different methods
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by customers. A sharp, even bead is as important as the colour.
Paintable sealants
Overpainting is most common on internal joints with little movement. If the joint needs a product that can’t be painted, we say so.
Your questions answered
Can you supply sealant in our brand colour for a site in North Street?
Yes, we can typically get close to most finishes from the product’s colour range. Available colours for the product are confirmed with the quote.
Does a hotel in North Street need to shut while its sealant is renewed?
Almost never. The work is phased so most rooms stay available. We agree the order of rooms and the timings with you before we start.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited and a Constructionline member.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.