Floor Joint Sealing contractors in Loose
Need floor joint sealing in Loose? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Broken arrises where pallet trucks cross
- Brittle joint filler breaking up
- Drivers complaining about joints on a route
Need floor joint sealing in Loose?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Loose
Not every floor joint we treat is in a warehouse. Retail units, showrooms and trade counters have slab joints crossed by trolleys, footfall and cleaning machines, and an open, grimy joint line looks poor as well as catching wheels. A flush, well-finished joint tidies the whole floor. If you are dealing with loading bay joints breaking down and filler that has parted from one face, we can put it right, on joints along racking aisles, loading bays and retail and showroom floors alike. A single leaking joint is often how a building in Loose first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Smaller community and commercial buildings around Loose have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, give us a call on 01277 525 020 or email us and we will arrange a return visit.
- Place
- Loose (ME15, ME17)
- Region
- Kent
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What we are called out for in Loose
A slab keeps shrinking for a long time after it is cast, and saw-cut joints give that shrinkage a planned place to crack. As the panels contract, the joints widen so a filler put in early may separate along one side.
Look out for the following:
- Cracked and crumbling joint fill
- Loading bay joints breaking down
- Filler that has parted from one face
- Sealant pulled out along a truck route
A campus such as University for the Creative Arts - Maidstone (2.4 miles north of Loose) has long runs of movement joint in its buildings, decks and paving.
Comparing quotes
- What the guarantee covers, and for how long
- How joint depth will be controlled
- Whether primer will be used where the manufacturer specifies it
- Whether their applicators hold CSCS cards
What else we do in Loose
What affects the price in Loose
These are the things that shape the price:
- Whether the work must be split into stages
- Which sealant the job calls for
- Access and working height
- Induction, permit and paperwork requirements
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
A few photographs plus some basic facts will normally do. Please tell us:
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
- The type of building and who uses it
- Photos of the joints, close up and from further back
For a fixed quote, phone 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. Our quote form is another easy route.
Leave it or put it right?
Waiting for a site-wide shutdown often means the joints keep getting worse. Phased in zones, the busiest routes can be treated first while the rest of the floor carries on. Converted and older buildings near places like Loose tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Specification-led, product-correct work
- Our applicators hold CSCS cards
- Workmanship guaranteed for 12 months
- Fully insured
Take a look at what affects the cost and our accreditations.
What we can’t put right
Sealant solves a lot, but not everything, and we’re upfront when that’s the case. These need a different solution:
- Uneven floors that need grinding or levelling
- Slab panels that rock or move under load
- A failing floor coating, which is a flooring contractor’s job
If you are not sure, just give us a call on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Where we work in Loose
- Joints along racking aisles
- Saw-cut induced joints
- Construction joints
- Loading bays
- Forklift and pallet-truck routes
- Retail and showroom floors
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Loose can sit alongside others in a wider programme.
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Loose need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
What we need from you
- Let building users know which areas are affected
- Point out parking and an unloading spot
- Share the asbestos register for older buildings
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or send photos by email if you’d rather talk the job through.
Read more
Common questions from Loose clients
Is hospital work, at somewhere like The Somerfield Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is Loose too far out for you?
Not at all. Loose is within our area. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Do you have public liability insurance?
Yes. We are fully insured, including public liability cover.
Should floor joints be filled or sealed?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is usually right, and movement joints or perimeters need something flexible. You will see the choice for each area in the quote.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Do you repair broken joint edges?
We check the edges as part of the survey. Where they have broken away, we’ll tell you before quoting the filling so the filling isn’t wasted.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Where floor joints take the most wear near Loose
The 3 miles around Loose take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
On a site such as Tovil Green Business Park, which lies north of Loose, the movement joints are in car park slabs, paving and building elevations. Hospitals like The Somerfield Hospital, 2.7 miles to the north of Loose, have multi-storey or surface car parks whose joints carry vehicles round the clock.
Loose is about 2 miles south of Maidstone, in Kent. Anywhere in ME15, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Kent coverage takes in 931 places, from busy centres to rural villages. Sites around London have their own page, about 32 miles away.
Anyone looking for floor joint sealing in ME15 and ME17 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Rosemount Close, Malthouse Hill and Old Loose Hill are within our area for floor joints. Nearby places we also cover include Boughton Green (1 mile south-east), Boughton Monchelsea (1 mile south-east), Linton (1 mile south), Park Wood (2 miles east) and Shepway (2 miles north-east). Nearby towns on our patch include Sittingbourne (12 miles north-east), Sevenoaks (15 miles west), Royal Tunbridge Wells (13 miles south-west), Gravesend (15 miles north-west), Tonbridge (11 miles west) and Northfleet (15 miles north-west).
Landmarks near Loose
Locally, jobs take us to sites close to Cornwallis Academy and The Chequers Inn and the streets around them. For rail, the closest station is East Farleigh station, about 1.8 miles north-west. Nearby you will also find Kent Fire Brigade Museum (1.4 miles north) and The Mall Maidstone (2.4 miles north).