Floor Joint Sealing in Longmoor
Floor joint sealing in Longmoor, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Loading bay joints breaking down
- Brittle joint filler breaking up
- Drivers complaining about joints on a route
Floor joint sealing for Longmoor sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing for commercial buildings in Longmoor
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get, and the quote is fixed before we mobilise. Site teams most often ask us about sealant pulled out along a truck route and untidy open joints in a retail unit, across retail and showroom floors, loading bays and joints along racking aisles. A specialist sealant contractor works differently from a general builder: on jobs in Longmoor, preparation and product choice get the time they need.
For a site near Longmoor, measurements and photos up front mean one trip where possible. Note joint widths and the traffic that uses them, and we’ll take it from there.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Longmoor (GU33)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Do you need floor joint sealing in Longmoor?
A soft, flexible sealant on a forklift route can’t hold the arrises up and the edges fail regardless. The opposite mistake happens as well: a rigid fill in a joint that is still opening cracks or debonds.
These are often picked up first by site or facilities staff:
- Grimy joint lines spoiling a showroom floor
- Old filler gone hard, cracked or loose
- Sealant pulled out along a truck route
- Joint fill separating from the concrete
Business parks such as Longmoor Enterprise Park, less than half a mile west of Longmoor, have car parks, paved areas and long brick and panel elevations, all with movement joints.
Questions to ask before you book
- How the existing material will be dealt with
- Is the sealant right for the movement and the substrate?
- Will CSCS-carded applicators be on site?
- Proof of insurance
What affects the price in Longmoor
There’s no standard rate for sealant work, because every site is different. What we take into account:
- How accessible the joints are
- Whether the work must be split into stages
- Site requirements such as inductions and permits
- Distance, for remote addresses
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- Drawings or a marked-up plan, if available
- The product your specification calls for
- Access details, including height
- A wide shot and a close-up of the area
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or email a schedule or drawings.
Floors, slabs and movement joints in Longmoor
Longmoor is about 45 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day. Rainfall across the South East, Longmoor included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in.
Large sites such as Chase Hospital (to the north of Longmoor) have car parks, service roads and long elevations with movement joints in brick and panels. Across sites such as Ham Barn Business Park (1.6 miles south-west of Longmoor), floor and movement joints can be sealed in phases so units keep working.
Longmoor is about 3 miles south of Bordon, in Hampshire. Our applicators travel to Longmoor for work on floor joints, handled exactly as we handle every other area. Longmoor is one of 723 places in Hampshire on our list. Sites around Portsmouth have their own page, about 20 miles away.
Anyone looking for floor joint sealing in GU33 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Woolmer Road, Roberts Road and Methuen Road. Nearby places we also cover include Greatham (1 mile west), Woolmer (1 mile north-west), Liss Forest (2 miles south-west), The Mint (2 miles south) and Blackmoor (2 miles north-west) for floor joints. Further afield, our area takes in Havant (15 miles south), Fleet (14 miles north), Horndean (13 miles south-west), Aldershot (13 miles north), Alton (7 miles north-west) and Waterlooville (15 miles south-west).
Near you in Longmoor
The nearest railway station is Liss station, about 2.3 miles south-west of the centre. Nearby you will also find The Romany Museum (3.4 miles north-west) and Chase Community Hospital (2.3 miles north). Open spaces near Longmoor include Wheeler's Down and Liss Riverside Railway Walk North.
Towns and villages near Longmoor
More services for Longmoor
Different surfaces, different methods
Semi-rigid joint fillers
A semi-rigid filler is stiff enough to hold the arrises up when wheels cross. They allow only small movement, so they suit joints where most shrinkage has already happened.
Isolation joints at walls and columns
Isolation joints separate the slab from walls, columns and plinths so it can move independently. A flexible product suits them better than a stiff filler.
Honest limits
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Damaged or worn floor coatings and screeds
- Level or flatness problems across the floor
- Joint edges that have already broken away, which need repairing before filling (we’ll tell you if so)
Not sure which it is? You can ring 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Surfaces we seal
- Saw-cut induced joints
- Construction joints
- Retail and showroom floors
- Forklift and pallet-truck routes
- Joints along racking aisles
- Loading bays
Questions about Longmoor
Is Longmoor Enterprise Park, near Longmoor, within your area?
Yes. Our area takes in Longmoor and its surroundings, with estates and business parks such as Longmoor Enterprise Park included. A few photos and the unit address let us price the work.
Is a smaller place like Longmoor outside your area?
No. Small places get the same service as large ones. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Do you guarantee industrial floor joints?
Our workmanship carries a 12-month guarantee, and we hold public liability insurance.
How long before trucks can use the joints?
Cure times vary with the product and how cold the slab is. We’ll give you a time for each zone before we start.
Why is there a gap next to the joint filler?
Young concrete carries on shrinking for a long time, so a semi-rigid filler can part from one face. It is typically dealt with by topping up.
What happens if the joint edges are damaged?
A filler needs sound edges to grip. If the arrises have spalled, we will say they need repair before filling, so you can decide how to proceed.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards.
Leave it or put it right?
Duct tape or a general builders’ sealant can seem to buy some time. Neither is made to carry wheels and traffic soon pulls it out. A product chosen for the traffic and movement does the job once. Around Longmoor, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why clients in Longmoor choose us
- Fully insured, including public liability cover
- Commercial sealant work since 2005
- Workmanship guaranteed for 12 months
- A fixed quote before work starts
Take a look at how commercial sealant jobs are priced and our accreditations.
Our process
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. For work around Longmoor, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- A fixed quote follows, listing the treatment for each area and the order of work.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Send your site hours and access windows
- Let building users know which areas are affected
- Let us know about inductions and permits
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.