Industrial and floor joint sealing in Knights Enham, Hampshire
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Knights Enham and the surrounding area. Send details for a fixed quote.
- Scruffy, dirty joint lines on a shop or showroom floor
- Joint edges breaking up under truck wheels
- Brittle joint filler breaking up
Floor joint sealing for businesses in Knights Enham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before we move to the next. Smaller jobs around Knights Enham can be grouped with others nearby. You’ll have a fixed quote before work starts.
- Each area is assessed for joint width, arris damage and the wheels that cross it.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- Each phase reopens when the product is ready for wheels, then we start the next.
Before we start on site
- Have the specification and drawings to hand
- Share your working hours and any access restrictions
- Arrange parking or a loading space
Quotes
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or email us.
Advice
How we handle floor joint sealing in Knights Enham
Mastic Doctor has worked on joints in commercial buildings for over 20 years. Applicators carry CSCS cards and work to your site rules, and we are CHAS accredited and a Constructionline member holding public liability insurance. Finished floor joints in Knights Enham carry our 12-month guarantee. Site teams most often ask us about broken arrises where pallet trucks cross and open saw cuts full of debris, across construction joints, joints along racking aisles and saw-cut induced joints. One point of contact handles commercial sealant work in Knights Enham from the first photos to the final walk-round, whether it’s one building or several.
Around smaller places such as Knights Enham, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Knights Enham (SP10)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Why it’s worth doing now in Knights Enham
While the arrises are intact, filling a joint is straightforward. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled which means more downtime in that zone. One visit to deal with every failing joint makes more sense than several trips to a place like Knights Enham, rather than one at a time. Photos of every joint help us quote for the whole job.
The price depends on the quantity of joints, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Why clients in Knights Enham choose us
- 12-month guarantee on workmanship
- A Constructionline member, so easy to vet
- Work to your specification and the manufacturer’s guidance
- Work carried out by CSCS-carded applicators
Read how commercial sealant jobs are priced or how we’re accredited.
Common problems we fix in Knights Enham
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Crossing an open joint, the wheel drops and knocks the opposite arris and those knocks chip the edge apart bit by bit.
Typical triggers for a call:
- Unfilled floor joints collecting dirt and grit
- Chipped and spalling edges along forklift routes
- A gap opening alongside old joint filler
- Sealant pulled out along a truck route
For an estate such as Andover Hospital (Grounds), which lies south-west of Knights Enham, the joints in ramps, decks and long building elevations all need attention over time.
Before you book anyone
- Can the work be phased to keep areas open?
- Do they follow the manufacturer’s priming guidance?
- Which product they’ll use, and why it suits the joint
- Their public liability cover
Questions about Knights Enham
Do you take on work at healthcare sites like Andover Hospital (Grounds)?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Is Knights Enham too far out for you?
Not at all. Knights Enham is within our area. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How long before trucks can use the joints?
The wait is set by the product’s cure time, and cold floors slow it down. Phasing is planned with that in mind.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Where floor joints take the most wear near Knights Enham
Less than 3 miles from Knights Enham there are at least three named estates and business parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Knights Enham sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open.
In a school such as Roman Way Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak. For an occupier at a site such as Glenmore Trade Park, 0.8 miles south of Knights Enham, the joints at loading doors and dock levellers normally see the hardest wear.
Knights Enham is about 1 mile north of Andover, in Hampshire. We send applicators to Knights Enham for floor joints. We work across 723 places in Hampshire, large and small. Our Southampton page has more on work in that area, about 22 miles away.
We cover the SP10 postcode districts. Streets here include Manor Copse and Newbury Road, and sites on any of them can send details for a fixed quote. Just outside Knights Enham, we also work in East Anton (1 mile south-east), Enham Alamein (1 mile north), Smannell (1 mile north-east), Upper Enham (1 mile north) and Finkley (1 mile east). Bigger towns within reach include Winchester (14 miles south-east), Hyde (13 miles south-east), Tidworth (8 miles west), Weeke (13 miles south-east), Kempshott (15 miles east) and Stanmore (14 miles south-east).
Landmarks near Knights Enham
We work on buildings around Harrow Way Community School. The closest station to Knights Enham is Andover station, about 1.5 miles south-west of the centre. Other landmarks nearby include Finkley Down Farm Museum (1.2 miles south-east) and Andover War Memorial Hospital (1.3 miles south-west). Open spaces near Knights Enham include Mill Lake and Anton Lakes.
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- A floor that is out of level for the racking or trucks
- Slab panels that rock or move under load
- Damaged or worn floor coatings and screeds
Not sure which it is? You can ring 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
Where we work in Knights Enham
- Joints along racking aisles
- Retail and showroom floors
- Construction joints
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Loading bays
Also near Knights Enham
Other services in Knights Enham
Aftercare for building managers
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Make joint checks part of your floor inspections
- Remind operators to lift rather than drag
- Allow for topping up joints as a new slab settles
- Clear packed debris from open joints regularly
Ask drivers not to drag forks or pallets along the floor. Steel tines will mark a good joint over time if it keeps happening.
Grit in an open joint does damage every time a wheel crosses it. Filling it ends that cycle before it becomes a repair.