Floor Joint Sealing in Kempe's Corner
Looking for floor joint sealing in Kempe's Corner? It’s simple: send details, get a quote, we seal, guaranteed.
- Cracked and crumbling joint fill
- Joint edges breaking up under truck wheels
- Dock area joints that have failed first
Floor joint sealing for businesses in Kempe's Corner
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing in Kempe's Corner, done properly
Across Kempe's Corner and the rest of Kent, it runs the same way: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote, or we can arrange a site visit. We work on construction joints, joints along racking aisles and saw-cut induced joints, and the usual reasons a site gets in touch are a gap opening alongside old joint filler and joint edges breaking up under truck wheels. A single leaking joint is often how a building in Kempe's Corner first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In and around smaller places like Kempe's Corner, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Kempe's Corner (TN25)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Warehouse floors and decks around Kempe's Corner
Kempe's Corner has at least three named business or industrial parks inside a 3-mile radius. Their warehouses, yards and car parks are exactly where joints take the most punishment. Kempe's Corner is in the South East, one of the UK’s drier regions. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open.
At places like Henwood Industrial Estate (2.5 miles south-west of Kempe's Corner), joints are sealed a section at a time so operations carry on. Hospital campuses such as The One Ashford Hospital (2.8 miles south of Kempe's Corner) grow in stages, leaving movement joints wherever new blocks meet old.
Kempe's Corner is about 4 miles north-east of Ashford, in Kent. If you’re looking for floor joint sealing in Kempe's Corner, we can help. Kempe's Corner is one of 931 places we cover in Kent for floor joints. Our London page has more on work in that area, about 49 miles away.
Work on floor joints is covered throughout TN25, for business premises of every kind. Streets here include Harville Road and Canterbury Road. Nearby places we also cover include Boughton Corner (1 mile north), Boughton Aluph (1 mile north), Wye (1 mile east), Brook (2 miles south-east) and Hinxhill (3 miles south) for floor joints. Nearby towns on our patch include Ashford (4 miles south-west), Canterbury (10 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (13 miles north-east) and Faversham (9 miles north).
Around Kempe's Corner
We work on buildings around Wye School, The Tickled Trout pub and Wye School. Kempe's Corner’s nearest station is Wye station, roughly 0.8 miles east. A little further out are County Square (3 miles south-west) and Tower keep castle at Chilham (4.6 miles north-east). Open spaces near Kempe's Corner include Hatch Park.
Towns and villages near Kempe's Corner
What else we do in Kempe's Corner
When to call us in Kempe's Corner
Left open, joints fill with grit, wrap and wood fragments. Packed debris acts like a wedge every time a wheel crosses so the arrises break sooner.
Site and facilities staff are often the first to spot these:
- Soft sealant dragged out of trafficked joints
- Dock area joints that have failed first
- A gap opening alongside old joint filler
- Saw-cut joints left open and packed with grit
On a site such as Eurogate Business Park, 2.4 miles to the south-west of Kempe's Corner, the movement joints are in car park slabs, paving and building elevations.
What to look for in a quote
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
- Their approach to joint depth and backing
- How the joint faces will be prepared and primed
Quoting for work in Kempe's Corner
These are the things that shape the price:
- How much there is to seal
- Location, for remote and island sites
- The size and state of each joint
- Removal of failed or old sealant
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Whether an asbestos survey exists
- Any specification or named product
- Your programme or deadline
- Anything awkward about access or site hours
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
How the job changes by surface
Loading bays and dock areas
Dock areas see tight turns, heavy loads and weather blowing in. Joints here usually fail first so many programmes begin here.
Isolation joints at walls and columns
Joints at walls and columns are often missed when floors are sealed, and they collect dust and debris. We include them in the survey.
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Diagnose, treat, sign off
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Smaller jobs around Kempe's Corner can be grouped with others nearby. A fixed quote is given before anything starts.
- We look at joint widths, edge condition and the traffic on each route.
- A fixed quote follows, listing the treatment for each area and the order of work.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- We vacuum each run and prime it if the chosen product requires a primer.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
What we need from you
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
- Tell us which areas need to stay in use
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call the office on 01277 525 020 or send photos by email to discuss it first.
Read more
Common questions from Kempe's Corner clients
Is Kempe's Corner too small for you to travel to?
No. Places such as Kempe's Corner are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Is a hospital such as The One Ashford Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you repair broken joint edges?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front so the filling isn’t wasted.
Are you insured?
Yes. We are fully insured, and the certificate can go with your quote.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Leave it or put it right?
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. Neither is made to carry wheels, and it typically ends up dragged across the floor. The right filler or sealant saves doing it twice. Converted and older buildings near places like Kempe's Corner tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Why appoint us
- Work carried out by CSCS-carded applicators
- Failed material removed, not covered up
- A fixed quote before work starts
- One number for every site we cover
See how commercial sealant jobs are priced or our accreditations.