Kempe's Corner fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Kempe's Corner and the surrounding area. Send details for a fixed quote.
- Seals disturbed by maintenance and left open
- Unsealed joints where partitions meet the slab
- Old intumescent sealant that has split away
Fire stopping for businesses in Kempe's Corner
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire-rated sealing for Kempe's Corner buildings
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. A 2-mile radius around Kempe's Corner takes in several hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Hotels like Eastwell Manor Hotel (1.3 miles north-west of Kempe's Corner) are refurbished in phases, and each phase can open up compartment walls. Halls and meeting rooms at places like All Saints’ Church sometimes gain new services, and any compartment wall crossed needs the specified seal. Shop fits in centres such as Warren Retail Park (2.6 miles south-west of Kempe's Corner) can bring new services through fire-resisting walls between units, which then need the specified seal.
Kempe's Corner is about 4 miles north-east of Ashford, in Kent. Looking for fire stopping in Kempe's Corner? We can help. Kempe's Corner is one of 931 places in Kent on our list for service penetrations. Our London page has more on work in that area, about 49 miles away.
If you need fire stopping in TN25, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Harville Road and Canterbury Road are within our area. Nearby places we also cover include Boughton Corner (1 mile north), Boughton Aluph (1 mile north), Wye (1 mile east), Brook (2 miles south-east) and Hinxhill (3 miles south) for service penetrations. A short drive away, we cover Ashford (4 miles south-west), Canterbury (10 miles north-east), Sittingbourne (13 miles north-west), Folkestone (13 miles south-east), Whitstable (13 miles north-east) and Faversham (9 miles north).
Landmarks near Kempe's Corner
Locally, jobs take us to sites close to Wye School, The Tickled Trout pub and Wye School, among other places. The closest station to Kempe's Corner is Wye station, roughly 0.8 miles east. Other landmarks nearby include County Square (3 miles south-west) and Tower keep castle at Chilham (4.6 miles north-east). Open spaces near Kempe's Corner include Hatch Park.
About our fire stopping in Kempe's Corner
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. Site teams most often ask us about fire stopping installed outside its tested range and open linear gaps along the top of fire-resisting walls, on linear gaps at wall heads, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Kempe's Corner, that means joint design, primers and backing rod as standard.
Around smaller places like Kempe's Corner, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We stand by our work: 12 months, guaranteed. That covers our preparation and application.
- Location
- Kempe's Corner (TN25)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance.
On site: what to expect
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Rural sites near Kempe's Corner may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Preparing the site
- Tell us what induction or permit system the site runs
- Share your working hours and any access restrictions
- Send asbestos survey details if the building is pre-2000
Ask for a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Why act early in Kempe's Corner
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first and the building feels the difference. One visit to deal with every failing joint makes more sense than several trips to a place like Kempe's Corner. Photos of every joint help us quote for the whole job.
Pricing service penetrations depends on quantities, condition and access. Ask us for a fixed quote.
Why clients in Kempe's Corner choose us
- One contact handling all your sites
- A Constructionline member, so easy to vet
- Over 20 years of commercial sealing
- Products installed to the manufacturer’s instructions
Take a look at what affects the cost or our accreditations and insurance.
Maintenance after handover
Cleaning and maintenance staff play a part too. Pass these on to them:
- Leave fire sealant to cure fully before covering it
- Arrange inspection before areas are covered up
- Flag new cables with no seal around them
- Settle who seals which penetrations at the start of a project
Keep the product data and installation details with the building’s fire safety information. Anyone resealing later needs to know which product and detail were used.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Towns and villages near Kempe's Corner
More services for Kempe's Corner
Questions about Kempe's Corner
Is a hospital such as The One Ashford Hospital somewhere you can work?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
Is a smaller place like Kempe's Corner outside your area?
No. Places such as Kempe's Corner are covered as much as the big towns. Our area covers London and the South East counties. Good photographs up front let us bring everything on the first visit.
What changes on 2 September 2029?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029, subject to the Government’s transitional arrangements. The European route, BS EN 13501-2, then applies. Product selection stays with your designer.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. Work pauses if suspect material is found, until it has been tested.
What site paperwork can you supply?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Is sealant suitable for all service openings?
No. A sealant’s evidence covers set services, gaps and wall or floor types. If an opening falls outside, it needs another solution, as set out by the designer.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.