Floor Joint Sealing contractors in Hurst Wickham
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Hurst Wickham and the surrounding area. Send details for a fixed quote.
- Unfilled floor joints collecting dirt and grit
- Brittle joint filler breaking up
- Untidy open joints in a retail unit
Floor joint sealing for businesses in Hurst Wickham
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Diagnose, treat, sign off
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. Rural sites near Hurst Wickham may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
What we need from you
- Flag any permit to work we will need
- Share your working hours and any access restrictions
- Have the specification and drawings to hand
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, phone 01277 525 020 or email a schedule or drawings.
Related advice
Floor joint sealing in Hurst Wickham, done properly
Before quoting, we look at what the floor is telling us: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run, area by area where it needs to be. Most enquiries involve unfilled floor joints collecting dirt and grit and failing joints at loading bays and dock doors, on forklift and pallet-truck routes, saw-cut induced joints and construction joints. One point of contact handles commercial sealant work in Hurst Wickham from the first photos to the final walk-round, for single jobs and planned programmes alike.
Around smaller places such as Hurst Wickham, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Hurst Wickham (BN6)
- Wider area
- West Sussex
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Floor joint sealing around Hurst Wickham: what changes locally
The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint. Hurst Wickham is about 39 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
Another example is Kings Business Centre, 2 miles to the north-west of Hurst Wickham, where floors and yards would be done in stages around the occupiers. Schools like St Lawrence CofE Primary School often have long brick elevations with movement joints that age quietly. Large sites such as The Dene Hospital (to the north of Hurst Wickham) have car parks, service roads and long elevations with movement joints in brick and panels.
Hurst Wickham is about 2 miles south-west of Burgess Hill, in West Sussex. We cover commercial sites throughout Hurst Wickham, for single jobs and planned programmes alike. 373 places across West Sussex fall within our area, including Hurst Wickham. Brighton is covered too, around 7 miles from Hurst Wickham.
Commercial sites across BN6 are covered. Buildings on College Lane, Hurst Wickham Close and Belmont Lane are within our area for floor joints. If your building is just outside Hurst Wickham, we cover Hurstpierpoint (1 mile west), Hassocks (1 mile south-east), Keymer (1 mile south-east), Clayton (2 miles south-east) and Sayers Common (2 miles north-west). Further afield, our area takes in Crawley (12 miles north), Horsham (11 miles north-west), Worthing (13 miles south-west), Haywards Heath (5 miles north-east), East Grinstead (15 miles north-east) and Shoreham-by-Sea (8 miles south-west).
Near you in Hurst Wickham
Locally, jobs take us to sites close to Downlands Community School and The Poacher pub, among other places. Hurst Wickham’s nearest station is Hassocks station, roughly 1 mile south-east. A little further out are Clayton Castle (1.9 miles south) and The Budding Foundation Museum of Gardening (1 mile south-east). Not far away are Wolstonbury Hill and Bedelands Farm Nature Reserve.
Also near Hurst Wickham
More services for Hurst Wickham
FAQs: Hurst Wickham
Is Hurst Wickham too far out for you?
No. Places such as Hurst Wickham are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Can you take on a job at a hospital such as The Dene Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
How many days will you need on site?
That varies with the scale of the job, though a typical visit typically takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Allow for topping up joints as a new slab settles
- Ask drivers not to drag forks or pallets
- Let us know what the floor is cleaned with
- Keep grit out of unfilled joints in the meantime
If a joint we filled starts to break up within 12 months, tell us and we will arrange a look. Beyond that, an inspection once or twice a year catches failing joints early.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
Why it’s worth doing now in Hurst Wickham
Tape, or whatever sealant is in the stores cupboard, may look like a fix for a while. Neither is made to carry wheels, and it typically ends up dragged across the floor. A product chosen for the traffic and movement does the job once. Older rural buildings around Hurst Wickham move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Why choose Mastic Doctor in Hurst Wickham
- Over 20 years of commercial sealing
- Fixed quotes based on photos, drawings or a visit
- CHAS accredited contractor
- Constructionline member for supplier checks
Take a look at how commercial sealant jobs are priced or how we’re accredited.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Doing it in-house
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
What we can’t put right
We check first that sealant really is the fix. It isn’t the answer for:
- Unstable slabs moving under traffic
- Structural cracking in the slab
- Joint edges that have already broken away, which need repairing before filling (we will tell you if so)
If in doubt, ring 01277 525 020 or email a schedule or drawings and we’ll say what we think before you book.
Where we work in Hurst Wickham
- Saw-cut induced joints
- Loading bays
- Retail and showroom floors
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints