Expansion joint sealing in Hurst Wickham
We carry out expansion and movement joint sealing in walls, decks and floors in Hurst Wickham. Send photos or drawings for a fixed quote.
- Hardened, cracked sealant on exposed facades
- Chipped joint edges on forklift routes
- Debris jammed in movement joints
Expansion joint sealing near Hurst Wickham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing around Hurst Wickham: how the place shapes the job
Hurst Wickham has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Rainfall across the South East, Hurst Wickham included, is lower than in many parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
On a site such as Victoria Business Park, 1.4 miles north-east of Hurst Wickham, the movement joints are in car park slabs, paving and building elevations. For a school such as St Lawrence CofE Primary School, playground and building joints can be done in the holidays.
Hurst Wickham is about 2 miles south-west of Burgess Hill, in West Sussex. Across the BN6 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 373 places in West Sussex, large and small. There’s a separate page for Brighton, about 7 miles away.
Anyone looking for expansion joint sealing in BN6 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on College Lane, Hurst Wickham Close and Belmont Lane or close by, send details and we will quote for movement joints. We also cover Hurstpierpoint (1 mile west), Hassocks (1 mile south-east), Keymer (1 mile south-east), Clayton (2 miles south-east) and Sayers Common (2 miles north-west). Bigger towns within reach include Crawley (12 miles north), Horsham (11 miles north-west), Worthing (13 miles south-west), Haywards Heath (5 miles north-east), East Grinstead (15 miles north-east) and Shoreham-by-Sea (8 miles south-west).
What’s near Hurst Wickham
Recent enquiries here include premises near Downlands Community School and The Poacher pub, among other places. For rail, the closest station is Hassocks station, about 1 mile south-east of the centre. Nearby you will also find Clayton Castle (1.9 miles south) and The Budding Foundation Museum of Gardening (1 mile south-east). Green spaces nearby include Wolstonbury Hill and Bedelands Farm Nature Reserve.
How we handle expansion joint sealing in Hurst Wickham
Floor movement joints in warehouses, retail and public buildings carry wheeled traffic. Unsupported edges break up under wheels so the product has to suit both the traffic and the movement. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. Most enquiries involve torn sealant in brick or block movement joints and water dripping through deck or ramp joints, on brickwork movement joints, precast concrete panel joints and blockwork control joints. Looking for mastic applicators who cover Hurst Wickham? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Jobs around smaller places like Hurst Wickham are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we’ll take it from there.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Location
- Hurst Wickham (BN6)
- Wider area
- West Sussex
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Why deal with it now?
Sealing over a failed movement joint is a common shortcut. A bead laid on top of the failed one neither grips nor flexes properly and soon lets go. We cut out the old seal and prepare the faces every time. Halls, stores and units around places like Hurst Wickham may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why choose Mastic Doctor in Hurst Wickham
- Work to your specification and the manufacturer’s guidance
- Sealing commercial buildings since 2005
- Workmanship guaranteed for 12 months
- RAL and finish matching where the product range allows
Take a look at our cost guide or how we’re accredited.
Towns and villages near Hurst Wickham
Also in Hurst Wickham
Questions about Hurst Wickham
Is a smaller place like Hurst Wickham outside your area?
No. Places such as Hurst Wickham are covered as much as the big towns. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
Do you take on work at healthcare sites like The Dene Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you work while the building is occupied?
Usually, yes. Phased work can be planned so areas stay in use.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
How do I request a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
From enquiry to sign-off
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. Jobs in and around smaller places like Hurst Wickham are normally planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, flagging any broken edges that need repair before sealing.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Finished joints are checked and backed by our 12-month guarantee.
What we need from you
- Flag any permit to work we will need
- Send any specification or drawings in advance
- Move anything stored against the joints
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call the office on 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
What we are called out for in Hurst Wickham
When the movement exceeds the sealant’s capability, the bead tears. Cohesive failure, a split through the centre, usually means the joint or product wasn’t right for the movement. Resealing like for like often fails the same way unless width and product are reviewed.
Clients typically get in touch after noticing something like this:
- Brittle, chalky sealant on external joints
- Leaks through car park deck joints onto the level below
- Torn sealant in brick or block movement joints
- Arrises breaking up along floor joints
For an estate such as The Dene Hospital, which lies north of Hurst Wickham, the joints in ramps, decks and long building elevations all need attention over time.
What to look for in a quote
- How they’ll work around occupants
- Will RAMS and insurance details be available?
- Proof of insurance
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Include every elevation and deck joint in periodic inspections
- Keep stones and debris out of open joint lines
- Leave barriers in place until fresh joint sealant has cured
- Keep product details with the building records for the next reseal
Snow ploughs and scrapers catch on joint lines. Lifting the blade at each joint avoids tearing the bead, and it’s worth checking joints once the cold weather has passed.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint. Catching it early keeps the water outside.
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
When it isn’t the sealant
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- A joint that has to be widened or re-detailed before it can work
- Leaks coming from the membrane rather than the joint seal
- Concrete or masonry repairs along the arrises
If you’re not sure, just speak to us on 01277 525 020 or send photos by email and we will give you a straight answer.
What we seal
- Brickwork movement joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Blockwork control joints
- Cladding panel joints