Industrial and floor joint sealing in Hog Hatch, Surrey
Floor joint sealing and filling in warehouses, factories and industrial units throughout Hog Hatch and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Brittle joint filler breaking up
- Loading bay joints breaking down
- Sealant pulled out along a truck route
Floor joint sealing near Hog Hatch
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
On site: what to expect
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. Several jobs near Hog Hatch can be grouped on one trip. Mention the building’s opening times and we will work within them.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Preparing the site
- Warn occupants and staff about the work
- Send any specification or drawings in advance
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
Floor joint sealing in Hog Hatch, done properly
We diagnose the floor first rather than guessing at a product: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run, area by area where it needs to be. The enquiries we see most involve untidy open joints in a retail unit and flexible sealant torn out by wheels, on saw-cut induced joints, joints along racking aisles and forklift and pallet-truck routes. Searching for sealant specialists in Hog Hatch? We have been sealing commercial buildings since 2005.
Work in a smaller place like Hog Hatch is normally one building at a time, so we gather photographs and measurements first. That way the right materials come on the day and the job is done in one visit where possible.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Hog Hatch (GU9)
- Wider area
- Surrey
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is one of these:
- Level or flatness problems across the floor
- A failing floor coating, which is a flooring contractor’s job
- Broken concrete either side of the joint
If in doubt, call 01277 525 020 or send details through our quote form and we will say what we think.
Surfaces we seal
- Saw-cut induced joints
- Loading bays
- Forklift and pallet-truck routes
- Joints along racking aisles
- Construction joints
- Retail and showroom floors
Nearby places to Hog Hatch
What else we do in Hog Hatch
Where floor joints take the most wear near Hog Hatch
At least three named trading, business or retail sites lie within about 3 miles of Hog Hatch. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. Rainfall across the South East, Hog Hatch included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints.
Hospitals like Farnham Community Hospital, 1.3 miles south-east of Hog Hatch, have multi-storey or surface car parks whose joints carry vehicles round the clock. Another example is Romans Business Park (1.2 miles south-east of Hog Hatch), where floors and yards would be done in stages around the occupiers. For buildings at a park such as Riverside Business Park, 1.2 miles south-east of Hog Hatch, brick and panel movement joints are easy to forget until one leaks.
Hog Hatch is about 2 miles north of Farnham, in Surrey. Looking for floor joint sealing in Hog Hatch? We can help, as we do across Surrey. 379 places across Surrey fall within our area, including Hog Hatch. Sites around Reading have their own page, roughly 17 miles from Hog Hatch.
Work on floor joints is covered throughout GU9, whatever the building. Among the streets we cover are Coniston Drive, Dukes Walk and Folly Hill. If your building is just outside Hog Hatch, we cover Ewshot (1 mile north-west), Dora's Green (1 mile west), Warren Corner (1 mile west), Dippenhall (2 miles south-west) and Redlands (2 miles west). Bigger towns within reach include Guildford (10 miles east), Woking (12 miles north-east), Camberley (8 miles north-east), Frimley (7 miles north-east), Haslemere (11 miles south) and Cranleigh (15 miles south-east).
Near you in Hog Hatch
Locally, jobs take us to sites close to Farnham Heath End School and Weybourne LNR and the streets around them. The closest station to Hog Hatch is Farnham station, about 1.5 miles south-east of the centre. Well-known places in the area include Hart Shopping Centre (3.7 miles north-west) and Museum of Farnham (1.3 miles south). Open spaces near Hog Hatch include Farnham Park and Aunt's Pool.
How the job changes by surface
Semi-rigid joint fillers
On industrial routes, a semi-rigid filler is often the right choice. We place them to depth and trim them level with the slab.
Saw-cut induced joints
Induced joints are sawn into a new slab to control where it cracks. They start narrow and widen as the concrete dries so trafficked runs need a filler that holds the arrises.
Leave it or put it right?
Open joints are where dirt collects where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. For buildings in places like Hog Hatch, one well-planned visit beats several small ones, so we’d suggest renewing all the joints that are going, not just the worst.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why appoint us
- Fully insured, including public liability cover
- Products installed to the manufacturer’s instructions
- Work carried out by CSCS-carded applicators
- Fixed quotes based on photos, drawings or a visit
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Hog Hatch: questions and answers
Is Hog Hatch too small for you to travel to?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work on a hospital site such as Farnham Community Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Should floor joints be filled or sealed?
The answer comes from the traffic and the joint’s movement. Forklift routes generally call for a semi-rigid filler that holds the arrises, while joints that move more take a flexible sealant.
Are you insured?
Yes. We’re fully insured, including public liability cover.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Commercial clients in Hog Hatch
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first, and our applicators hold CSCS cards.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.