Industrial and floor joint sealing in High Cross, West Sussex
Work needed on a floor joint in High Cross? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Drivers complaining about joints on a route
- Dock area joints that have failed first
- Cracked and crumbling joint fill
Floor joint sealing near High Cross
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes a day or more, depending on the metres of joint and how many zones the floor is split into, and our waste is bagged and taken away as we go. Smaller jobs around High Cross can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Getting the site ready
- Point out any areas we must not close
- Share your working hours and any access restrictions
- Tell staff and tenants when we will be in
Ask for a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call the office on 01277 525 020 or email the details over.
Read more
About our floor joint sealing in High Cross
We have been sealing commercial joints since 2005. Applicators carry CSCS cards and work to your site rules, and we are CHAS accredited and a Constructionline member holding public liability insurance. Finished floor joints in High Cross carry our 12-month guarantee. We work on loading bays, construction joints and forklift and pallet-truck routes, and the failures we are asked to look at most are saw-cut joints left open and packed with grit and filler that has parted from one face. Most enquiries from High Cross start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Smaller community and commercial buildings around High Cross have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Place
- High Cross (BN6)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to High Cross
What else we do in High Cross
Questions about High Cross
Would you work within a site like The Dene Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you cover business parks and estates near High Cross, such as Valley Farm Business Park?
Yes. We cover High Cross and the area around it, including industrial estates, business parks and retail parks such as Valley Farm Business Park. To start, just call 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Do you work in High Cross?
Yes. We cover High Cross, and you can phone 01277 525 020 or email the details over to get started.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
How do we get a quote for floor joints?
Use our quote form, or email photos and a plan, with the traffic on each area. A fixed quote follows with the product and phasing set out.
Traffic, movement and joints around High Cross
High Cross sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, while winter salting gets into any joint left open. At about 39 miles from central London, High Cross is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds.
Office parks like Valley Farm Business Park (0.7 miles north-east of High Cross) have decks, ramps and clad elevations whose joints take movement every day. Schools like Albourne CofE Primary School often have long brick elevations with movement joints that age quietly.
High Cross is about 4 miles west of Burgess Hill, in West Sussex. Any commercial site in High Cross is covered, for single jobs and planned programmes alike. 373 places across West Sussex fall within our area, including High Cross. Brighton is covered too, around 9 miles from High Cross.
We cover the BN6 postcode districts for floor joints. Nearby places we also cover include Albourne (1 mile south-east), Albourne Green (1 mile south-east), Albourne Street (1 mile south-east), Blackstone (1 mile south-west) and Twineham (2 miles north) for floor joints. A short drive away, we cover Crawley (12 miles north), Horsham (10 miles north-west), Worthing (11 miles south-west), Haywards Heath (7 miles north-east), Burgess Hill (4 miles east) and Shoreham-by-Sea (8 miles south).
Landmarks near High Cross
High Cross’s nearest station is Hassocks station, roughly 3.4 miles east. Other landmarks nearby include The Dene Hospital (2.9 miles north-east) and Clayton Castle (3.9 miles south-east). For a walk, there’s Wolstonbury Hill and Woods Mill.
Signs you need floor joint sealing in High Cross
Oil, laitance, dust and old cleaning chemicals build up inside joints. Without cutting back to sound, clean concrete the new filler can’t stay bonded.
Typical triggers for a call:
- Chipped and spalling edges along forklift routes
- Joint fill separating from the concrete
- Open saw cuts full of debris
- Drivers complaining about joints on a route
Phasing is what makes joint work possible on busy sites such as Kings Business Centre (0.9 miles north-east of High Cross): one bay, aisle or car park row at a time.
Before you book anyone
- Whether primer will be used where the manufacturer specifies it
- Their pre-qualification and accreditations
- Can the work be phased to keep areas open?
- What the guarantee covers, and for how long
Different surfaces, different methods
Isolation joints at walls and columns
Isolation joints separate the slab from walls, columns and plinths so it can move independently. A flexible product suits them better than a stiff filler.
Saw-cut induced joints
Saw cuts are made soon after the slab is cast so shrinkage cracks follow a line. They are narrow but open up as the panels shrink so trafficked runs need a filler that holds the arrises.
Leave it or put it right?
Open joints are where dirt collects, out of reach of the floor cleaner. Where the floor is on show or needs to be kept clean, that is a problem. Filled joints are far simpler to keep clean. Older rural buildings around High Cross move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
What a job costs comes down to how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Why appoint us
- Workmanship guaranteed for 12 months
- Fully insured, including public liability cover
- CSCS-carded applicators
- Specification-led, product-correct work
Take a look at what affects the cost or our accreditations and insurance.
Keeping the joints sound
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Hold traffic back until the product has cured
- Walk the main routes and inspect joint lines on a regular cycle
- Put loading bays at the top of the list
- Sweep debris out of open joints until they can be filled
If a joint we filled starts to break up within 12 months, tell us and we’ll arrange a look. After that, a check before your busiest period keeps small repairs small.
Grit in an open joint does damage every time a wheel crosses it. Getting it filled stops the damage while it is still a straightforward job.
What sets the cost
Quotes vary with the job. Expect it to depend on:
- Travel to remote or island sites
- Access and working height
- How much there is to seal
- The site’s rules and procedures
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Before you send an enquiry
There’s no need for a formal survey. These details are enough to start:
- Any dates the work must fit around
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
- Access details, including height
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.