The Mastic Doctor team standing beside their branded vans outside an office building
West Sussex · England

Commercial washroom and wet-area sealing in High Cross, West Sussex

Sealing in commercial washrooms, showers, kitchens and wet areas throughout High Cross and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.

  • Discoloured joints around urinals and WC pans
  • Shower tray joints that have opened up
  • Black mould inside silicone joints that cleaning can’t shift
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
London, the South East & Scotland
CHAS accredited
Fully insured: £5m PL

Washroom sealing across High Cross

Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.

When to bring in a specialist

Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.

About our washroom sealing in High Cross

Washroom joints need the right sealant, not whatever is to hand. Sanitary grades carry anti-mould additives, and neutral-cure versions avoid the damage acetoxy types can do to some metals, stone and mirror backings. Where food contact is possible, we use a hygienic, food-safe grade. We work on IPS panels and cubicles, urinals and WCs and kitchens and tea points, and what we’re called in for most is open joints along basins and vanity units and discoloured joints around urinals and WC pans. Most enquiries from High Cross start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.

Halls and community buildings near places like High Cross are used by different groups through the week, and their toilets and kitchens show it. Resealing sinks, worktops and WCs with anti-mould silicone keeps them clean and watertight.

We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.

Place
High Cross (BN6)
Region
West Sussex
Guarantee
12 months on our workmanship
Quote
Fixed quote, scope in writing
Telephone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

What sealant work can’t fix

We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:

  • Failed tanking beneath a wet-room floor or behind tiles
  • A dripping waste or valve behind a panel
  • Fittings that move too much to hold a bead

If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think.

Surfaces we seal

  • Showers, trays and wet room floors
  • Kitchens and tea points
  • Vanity units and basins
  • IPS panels and cubicles
  • Accessible toilets and changing rooms
  • Urinals and WCs

Questions we’re asked in High Cross

Would you work within a site like The Dene Hospital?

Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.

Will all the washrooms in our High Cross building be closed at once?

Rarely all at once: work is phased so some facilities are always available. We’ll tell you the curing time for the product before we start.

Is it possible to just clean mouldy silicone?

Not for long. The mould is inside the silicone so cleaning only lightens it for a while. Replacing the bead is the lasting answer.

Does the weather affect the work?

It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

Which silicone is right for commercial washrooms?

Sanitary silicone with anti-mould additives in the majority of cases. Neutral-cure grades are used where acetoxy types could mark metals, stone or mirror backings.

How long do sealant joints last?

There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.

How long does a typical visit take?

It depends on the scope, but the work usually takes half a day to a day per washroom, depending on the number of fittings. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.

After the work

Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:

  • Keep washrooms out of use until we say the sealant has cured
  • Add sealant joints to planned maintenance checks
  • Make sure washroom ventilation is running
  • Report split joints at trays and basins early

Ventilation is half the battle. A room that stays damp will grow mould on almost anything so report fans that aren’t working to your building services team.

Leaks through tray and wet-floor joints can go unseen until a ceiling marks below. By then, other trades may be needed as well, so reseal when you first spot a split.

Surface by surface

Urinals and WC pans

Floor joints around WC pans are often forgotten. We include them in the survey.

Kitchens and tea points

Kitchen work can be phased around service. Tell us your site hours and access windows and we’ll plan around them.

Our process

Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a few hours for one toilet block, with bigger buildings phased across a number of visits, and we clear our waste as we work. If others near High Cross need work, visits can be combined, which keeps travel down. You will have a fixed quote before work starts.

  1. We inspect each washroom and record the joints to be resealed.
  2. You get a fixed quote with the phasing plan.
  3. The whole of the old bead is removed.
  4. Each joint is cleaned and left dry.
  5. A sanitary silicone bead is laid and given a smooth tooled finish.
  6. Rooms reopen after the cure time.

What we need from you

  • Send your site hours and access windows
  • Point out any areas we must not close
  • Send asbestos survey details if the building is pre-2000

Getting a fixed quote

Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.

Get a quick quote

Related advice

For managing agents and facilities managers

Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.

Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

Commercial washrooms in High Cross

Central London is about 39 miles from High Cross. Office toilets in the commuter belt are in use from first arrivals to last departures, and resealing in phases keeps facilities available.

Halls linked to places like The Parish Church of St Bartholomew host groups all week, which is hard on kitchen and toilet sealant. At a school such as Albourne CofE Primary School, changing rooms and kitchens need cleanable joints as much as the toilets. Staff changing rooms and patient toilets at places like The Dene Hospital, 2.9 miles to the north-east of High Cross, need cleanable, sound silicone.

High Cross is about 4 miles west of Burgess Hill, in West Sussex. If you’re looking for washroom sealing in High Cross, we can help, as we do across West Sussex. Across West Sussex, 373 places are covered, High Cross among them. For work in that direction, see our Brighton page.

If you need washroom sealing in BN6, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Sites close to High Cross are covered too, including Albourne (1 mile south-east), Albourne Green (1 mile south-east), Albourne Street (1 mile south-east), Blackstone (1 mile south-west) and Twineham (2 miles north). Bigger towns within reach include Crawley (12 miles north), Horsham (10 miles north-west), Worthing (11 miles south-west), Haywards Heath (7 miles north-east), Burgess Hill (4 miles east) and Shoreham-by-Sea (8 miles south).

Around High Cross

For rail, the closest station is Hassocks station, roughly 3.4 miles east. Well-known places in the area include The Dene Hospital (2.9 miles north-east) and Clayton Castle (3.9 miles south-east). Not far away are Wolstonbury Hill and Woods Mill.

Map of High Cross © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.