
Floor Joint Sealing in Hersham
Sealant work in Hersham for main contractors, managing agents and facilities managers: floor joint sealing and filling in warehouses, factories and industrial units, with a fixed quote first.
- Untidy open joints in a retail unit
- Flexible sealant torn out by wheels
- Trucks and loads jolting over damaged joints
Floor joint sealing near Hersham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Expect fillers on young slabs to need a top-up
- Keep trucks off new joints until we say they’re ready
- Check joint lines on busy aisles regularly
- Sweep debris out of open joints until they can be filled
Young concrete carries on shrinking, so some fillers part slightly from one face. It is a known trait of new floors and a later top-up deals with it in most cases.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
Floor joint sealing in Hersham
Before quoting, we look at what the floor is telling us: how wide the joints are, signs of ongoing movement, the wheel types crossing them and the state of the arrises. From that we choose between a semi-rigid filler and a more flexible sealant, area by area where it needs to be. We work on forklift and pallet-truck routes, construction joints and saw-cut induced joints, and the usual reasons a site gets in touch are open saw cuts full of debris and filler that has parted from one face. Looking for mastic applicators who cover Hersham? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Around Hersham, most floor and movement joint jobs are single buildings or yards. That way the right materials come on the day and the job is done in one visit where possible.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.

- Where
- Hersham (KT12)
- Region
- Surrey
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Hersham: questions and answers
Do you cover business parks and estates near Hersham, such as Hersham Place Technology Park?
Yes. Our area takes in Hersham and its surroundings, with estates and business parks such as Hersham Place Technology Park included. Send details of the unit and the work through our quote form for a quick quote.
Would you work within a site like Walton Community Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
How long before trucks can use the joints?
Each product has its own cure time, and cold floors slow it down. We plan the phasing so that waiting time fits your operation.
Is Hersham in your area?
Yes. We cover Hersham and the rest of Surrey, within our coverage of Greater London, South East England and Scotland. To discuss a job, call 01277 525 020 or email the details over.
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For a site in Hersham, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
What we need from you
- Send any specification or drawings in advance
- Point out parking and an unloading spot
- Share your working hours and any access restrictions
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Read more
Common problems we fix in Hersham
Unfilled joints soon pack with grit, shrink-wrap scraps and pallet splinters. That debris is hard and levers at the edges as wheels pass so the arrises break sooner.
These are often picked up first by site or facilities staff:
- Drivers complaining about joints on a route
- Soft sealant dragged out of trafficked joints
- Loading bay joints breaking down
- A gap opening alongside old joint filler
Schools such as Bell Farm Primary School have movement joints in their walls and floors that are easy to overlook.
Comparing quotes
- What level of public liability insurance do they hold?
- Will CSCS-carded applicators be on site?
- Their approach to joint depth and backing
- How they handle RAMS and site documents
What affects the price in Hersham
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- How accessible the joints are
- Travel to remote or island sites
- How much there is to seal
- Which sealant the job calls for
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
Details that help us quote
The more we know, the firmer the quote. Helpful details to send:
- Whether the building will be occupied during the work
- The postcode of the building
- Approximate linear metres or a joint schedule
- Anything awkward about access or site hours
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Joints that move: notes for Hersham
Hersham lies roughly 16 miles out from central London. Warehousing clusters around the motorways that ring and radiate from London. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
University campuses such as Kingston University Penrhyn Road Campus (to the north-east of Hersham) have car parks, paved walkways and building elevations with movement joints. Large sites such as Walton Community Hospital (to the north of Hersham) have car parks, service roads and long elevations with movement joints in brick and panels.
Hersham is about 1 mile south of Walton-on-Thames, in Surrey. We cover Hersham and the rest of Surrey, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 379 places in Surrey, large and small. Our London page has more on work in that area (16 miles or so).
Work on floor joints is covered throughout KT12, whatever the building. Streets here include Police Station Road, Queensway South and Queensway. With the A244 nearby, Hersham is easy to get to with materials and equipment. We also cover Burwood Park (1 mile south-west), Walton-on-Thames (1 mile north), Whiteley Village (2 miles south-west), St George's Hill (2 miles west) and Weybridge (2 miles west). Further afield, our area takes in Guildford (11 miles south-west), Woking (8 miles south-west), Camberley (14 miles west), Epsom (6 miles east), Redhill (14 miles south-east) and Ewell (6 miles east).
What’s near Hersham
Around Hersham, our work takes us to commercial buildings near The Barley Mow Public House, West End Common and Three Rivers Academy and the streets around them. The nearest railway station is Walton-On-Thames station, roughly 0.6 miles north-west. A little further out are No. 2 New Zealand General Hospital (1.6 miles north-west) and Chessington Castle Hill (4.8 miles east). The countryside around Hersham includes Claremont Lake and Jubilee Wood.
What else we do in Hersham
Should maintenance staff do it?
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.