Floor Joint Sealing contractors in Hattingley
Floor joint sealing and filling in warehouses, factories and industrial units in Hattingley and across Hampshire. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Joint fill separating from the concrete
- Chipped and spalling edges along forklift routes
- Failing joints at loading bays and dock doors
Floor joint sealing for businesses in Hattingley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Work for main contractors and building owners
Building owners and managing agents use us on everything from one building to a spread of sites around Hattingley. One quote can cover more than one site, so there’s one set of paperwork to deal with.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Floor joint sealing in Hattingley, done properly
For sites in Hattingley and across Hampshire, the process is short: you send details, we send a fixed quote, the joints are done and the 12-month guarantee follows. A rough length of joint, photographs of the worst areas and a site plan let us give a quick quote, or we can arrange a site visit. If you have cracked and crumbling joint fill and open saw cuts full of debris, we can help, whatever the surface. Whoever orders the work in Hattingley, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Halls, schools and small commercial buildings near places like Hattingley have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Hattingley (GU34)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Diagnose, treat, sign off
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Hattingley, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- You get a fixed quote with the product and the phasing set out.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- Filler or sealant goes in to the right depth and is finished flush with the slab.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Share the asbestos register for older buildings
- Tell us your opening times and when work is allowed
- Make sure the joints can be reached
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Advice
Questions we are asked in Hattingley
Will you take on work at estates like Barton Industrial Estate, close to Hattingley?
Yes. Estates, retail parks and business parks around Hattingley, Barton Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Can you work on a hospital site such as Alton Community Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
How long does a job like this take?
The duration is planned around your programme and the access we are given. You’ll have an expected duration with the quote.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Will you just go over the old sealant?
No. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Do you repair broken joint edges?
We check the edges as part of the survey. Damaged edges are flagged up front so the filling isn’t wasted.
Keeping the joints sound
Problems stay small when the joints are checked regularly. Specifically:
- Mention any aggressive cleaning regime at quote stage
- Walk the main routes and inspect joint lines on a regular cycle
- Keep grit out of unfilled joints in the meantime
- Expect fillers on young slabs to need a top-up
If a joint we filled starts to break up within 12 months, tell us and we will arrange a look. Beyond that, an inspection once or twice a year catches failing joints early.
Joints are easiest to look after when someone checks them regularly. A phased plan, worst routes first, spreads the work out so nothing is left to fail.
Traffic, movement and joints around Hattingley
Hattingley sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and where de-icing salt is spread in winter, open joints let it in. The 3 miles around Hattingley take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic.
Schools like Medstead Church of England Primary School often have long brick elevations with movement joints that age quietly. Another example is Lower Soldridge Business Park (1.4 miles south-east of Hattingley), where floors and yards would be done in stages around the occupiers.
Hattingley is about 5 miles west of Alton, in Hampshire. Looking for floor joint sealing in Hattingley? We can help, as we do across Hampshire. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. We also cover Southampton, around 20 miles from Hattingley.
If you need floor joint sealing in GU34, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Just outside Hattingley, we also work in South Town (1 mile east), New Copse (1 mile north-east), Soldridge (2 miles south), Medstead (2 miles south-east) and Holt End (2 miles north-east). Further afield, our area takes in Basingstoke (9 miles north), Winchester (11 miles south-west), Fleet (15 miles north-east), Alton (5 miles east), Petersfield (11 miles south-east) and Bordon (10 miles east).
Around Hattingley
Well-known places in the area include Barton Castle (1.4 miles west) and Alton Community Hospital (4.1 miles east). Green spaces nearby include King's Hill.
Quoting for work in Hattingley
What shapes the price:
- Site requirements such as inductions and permits
- Distance, for remote addresses
- Whether the work must be split into stages
- The size and state of each joint
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Before you send an enquiry
Whether it’s one area or a whole building, these details speed things up:
- What the building is and how it’s used
- The postcode of the building
- Photos of the joints, close up and from further back
- Access details, including height
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Common problems we fix in Hattingley
Loading bay joints are exposed to wind, wet tyres and bigger temperature swings, as well as the tightest turning loads. They are often the first on a site to break down.
If one of these sounds familiar, it’s time for a closer look:
- Brittle joint filler breaking up
- A rough ride across broken joints
- Loading bay joints breaking down
- Grimy joint lines spoiling a showroom floor
Estates like Barton Industrial Estate (to the north-west of Hattingley) combine warehouse slabs, yards and loading bays, all with joints under wheels.
What to look for in a quote
- How they’ll work around occupants
- What level of public liability insurance do they hold?
- Health and safety accreditation such as CHAS
- What the guarantee covers, and for how long