Industrial and floor joint sealing in Hankham, East Sussex
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Hankham. Send photos or drawings for a fixed quote.
- Drivers complaining about joints on a route
- Broken arrises where pallet trucks cross
- Failing joints at loading bays and dock doors
Need floor joint sealing in Hankham?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our floor joint sealing in Hankham
Sometimes the concrete either side of a joint has already spalled. A filler laid against broken edges has nothing sound to grip, so if the edges need repair before any filling, we’ll say so and explain how it affects the programme. We work on construction joints, saw-cut induced joints and retail and showroom floors, and what we’re called in for most is sealant pulled out along a truck route and joint fill separating from the concrete. A specialist sealant contractor works differently from a general builder: in Hankham, that means joint design, primers and backing rod as standard.
Jobs around smaller places like Hankham are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and we come back if anything isn’t right.
- Where
- Hankham (BN24)
- Region
- East Sussex
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Make joint checks part of your floor inspections
- Hold traffic back until the product has cured
- Treat loading bay joints first if they’re failing
- Let us know what the floor is cleaned with
Normal floor cleaning is fine once the product has cured. If you use strong chemicals or hot-water washing, mention it when we quote so the product suits them.
A broken joint on a main route is crossed by every truck on that route. Early treatment protects wheels, loads and drivers as much as the floor.
Hankham: questions and answers
Is Hankham too far out for you?
Not at all. Hankham is within our area. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Do you take on work at healthcare sites like Eastbourne District General Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
How long does a typical visit take?
It depends on the scope, but the work normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we’ll set out a timescale with the quote.
How long before trucks can use the joints?
The wait is set by the product’s cure time, and cold floors slow it down. Phasing is planned with that in mind.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Can weather delay the job?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Traffic, movement and joints around Hankham
The sea is no more than about 3 miles from Hankham. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. Hankham is about 50 miles from central London. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day.
For an estate such as Eastbourne District General Hospital, which lies south-west of Hankham, the joints in ramps, decks and long building elevations all need attention over time. If you manage units on an estate such as Langsett Industrial Estate (0.6 miles south-east of Hankham), the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
Hankham is about 3 miles north of Eastbourne, in East Sussex. Any commercial site in Hankham is covered, for single jobs and planned programmes alike. We work across 308 places in East Sussex, from busy centres to rural villages. Our Brighton page has more on work in that area (19 miles or so).
We take on floor joints across the BN24 postcode area, for business premises of every kind. We cover commercial and managed buildings on Hankham Road, Milton Street and Foords Lane. Just outside Hankham, we also work in Blackness (1 mile south-west), Stone Cross (1 mile south), Polegate (2 miles west), Lower Willingdon (2 miles south-west) and Willingdon (2 miles south-west). Further afield, our area takes in Eastbourne (3 miles south), Hastings (12 miles east), Bexhill-on-Sea (8 miles east), Seaford (9 miles west), Lewes (13 miles west) and Hailsham (3 miles north-west).
Near you in Hankham
Around Hankham, our work takes us to commercial buildings near The Red Lion pub and Causeway School. The nearest railway station is Pevensey & Westham station, about 1.4 miles south-east. Nearby you’ll also find Eastbourne District General Hospital (2.9 miles south-west) and Pevensey Castle (1.7 miles east). Not far away are Combe Hill.
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- Travel to remote or island sites
- Access and working height
- Phasing around occupants
- Induction, permit and paperwork requirements
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you are ready.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- The postcode of the building
- Specification clauses that apply
- Rough lengths or quantities, or drawings if you have them
- Any dates the work must fit around
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Our process
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Smaller jobs around Hankham can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- We look at joint widths, edge condition and the traffic on each route.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- We remove failed material and packed debris until sound concrete is exposed on both faces.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- The area is handed back once it has cured enough to take traffic.
Before we start on site
- Warn occupants and staff about the work
- Send asbestos survey details if the building is pre-2000
- Move anything stored against the joints
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email drawings and photos with what you know.
Related advice
Work for main contractors and building owners
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Nearby places to Hankham
Other services in Hankham
Why deal with it now?
While the arrises are intact, filling a joint is straightforward. Wait until the edges have spalled and the concrete needs repairing before the joint can be filled which means more downtime in that zone. Older rural buildings around Hankham move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
A quote for floor joints depends on quantities, condition and access. Ask us for a fixed quote.
Why choose Mastic Doctor in Hankham
- Commercial sealant work since 2005
- Work carried out by CSCS-carded applicators
- CHAS accredited contractor
- Fixed quotes based on photos, drawings or a visit
Read our cost guide or our accreditations.
Do you need floor joint sealing in Hankham?
Older fills harden, shrink and crack with age, particularly where cleaning machines and traffic work it daily. Once it has gone hard or come loose, it protects nothing.
Clients normally get in touch after noticing one or more of the following:
- Dock area joints that have failed first
- Unfilled floor joints collecting dirt and grit
- Untidy open joints in a retail unit
- A gap opening alongside old joint filler
Campuses like University of Brighton Eastbourne Campus (to the south of Hankham) mix old and new buildings, with movement joints wherever they meet.
Questions to ask before you book
- How they’ll work around occupants
- Their public liability cover
- How long is the guarantee, and what does it include?
- What site paperwork they can supply