Industrial and floor joint sealing in Fishbourne, West Sussex
Floor joint sealing for Fishbourne, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Joint fill separating from the concrete
- Old filler gone hard, cracked or loose
- Dock area joints that have failed first
Floor joint sealing in Fishbourne
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Floor joint sealing in Fishbourne, done properly
Before quoting, we look at what the floor is telling us: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. From that we choose between a semi-rigid filler and a more flexible sealant, area by area where it needs to be. If you have a rough ride across broken joints and open saw cuts full of debris, we can put it right, whatever the surface. One point of contact handles commercial sealant work in Fishbourne from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Around Fishbourne, most floor and movement joint jobs are single buildings or yards. Getting widths, depths and traffic details up front means one visit, not two.
Every job we finish is backed by a 12-month workmanship guarantee. If our installation lets you down in that time, we return and fix it.
- Place
- Fishbourne (PO19, PO18)
- Wider area
- West Sussex
- Cover
- A 12-month guarantee
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Fishbourne
Our building in Fishbourne is near the coast: does that change the sealant?
It can, yes: buildings near the sea take more wind-driven rain, and salt in the air nearer the shore. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Would you work within a site like Nuffield Health Chichester Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Do you offer coloured sealant?
That depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Is Fishbourne in your area?
Yes. Fishbourne is in our area and the rest of West Sussex. For a quote, speak to us on 01277 525 020 or email us.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Also near Fishbourne
More services for Fishbourne
Floors, slabs and movement joints in Fishbourne
Fishbourne is within about 3 miles of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, and edges left open tend to break up faster. Fishbourne is about 55 miles from central London. The roads out of London are lined with trade parks and distribution sheds.
Warehouse floors on estates like Terminus Industrial Estate (to the east of Fishbourne) carry pallet trucks and forklifts over every saw-cut joint. Hospitals like Nuffield Health Chichester Hospital (to the north-east of Fishbourne) have multi-storey or surface car parks whose joints carry vehicles round the clock.
Fishbourne is about 1 mile west of Chichester, in West Sussex. Across the PO19 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 373 places in West Sussex. Portsmouth is covered too, around 12 miles from Fishbourne.
Business premises anywhere in PO19 and PO18 are within our area. Buildings on Creek End, Palatine Gardens and Claver Gardens are within our area for floor joints. Sites close to Fishbourne are covered too, including Apuldram (1 mile south), Broadbridge (2 miles west), Bosham (2 miles west), East Ashling (2 miles north-west) and Bosham Hoe (2 miles south-west). Further afield, our area takes in Bognor Regis (6 miles south-east), Selsey (7 miles south), Littlehampton (12 miles east), Rustington (13 miles east), Angmering (15 miles east) and Yapton (9 miles east).
Landmarks near Fishbourne
Recent enquiries here include premises near Central C of E Junior School and Bishop Luffa School. Fishbourne has its own railway station: Fishbourne station. A little further out are Chichester Castle (1.6 miles east) and St Richard's Hospital (1.9 miles east). Green spaces nearby include Stoke Down and Kingley Vale National Nature Reserve.
Different surfaces, different methods
Isolation joints at walls and columns
Where racking or plant sits near column joints, access is agreed before we start.
Saw-cut induced joints
Most of the joints in a warehouse floor are saw cuts. Each one is cleaned out and filled to the specified depth with a flush finish.
After the work
Your facilities or cleaning team can help the joints last. Share these points with them:
- Record damaged joints with a photo and a location
- Stop forks and pallets being dragged across joints
- Treat loading bay joints first if they’re failing
- Hold traffic back until the product has cured
Once cured, the joints get cleaned along with the slab. If you use strong chemicals or hot-water washing, mention it when we quote so we choose something that tolerates them.
Regular inspection catches failing fills before the edges go. A phased plan, worst routes first, spreads the work out and keeps on top of the rest.
What we’re called out for in Fishbourne
Left open, joints fill with grit, wrap and wood fragments. Packed debris acts like a wedge every time a wheel crosses, speeding up the damage.
It’s worth sending us details if you spot any of the following:
- Saw-cut joints left open and packed with grit
- Trucks and loads jolting over damaged joints
- Scruffy, dirty joint lines on a shop or showroom floor
- Failing joints at loading bays and dock doors
Phasing is what makes joint work possible on busy sites such as Polthooks Farm Industrial Estate. (0.9 miles north-west of Fishbourne): one bay, aisle or car park row at a time.
Before you book anyone
- What site paperwork they can supply
- Can the work be phased to keep areas open?
- Their public liability cover
- The terms of the workmanship guarantee
When to bring in a specialist
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Our process
Working in a building that stays open takes some planning. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. Work in places the size of Fishbourne is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- The joint is filled to its specified depth and trimmed level.
- We hand each phase back when it can take traffic.
Preparing the site
- Confirm the product named in the specification
- Move anything stored against the joints
- Point out any areas we must not close
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or email the details over.
Advice
What sets the cost
The price varies from site to site. Expect it to depend on:
- The size and state of each joint
- Access and working height
- Removal of failed or old sealant
- Whether the work must be split into stages
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Anything awkward about access or site hours
- Any dates the work must fit around
- Specification clauses that apply
- Asbestos survey details if the building is older
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.