Floor Joint Sealing in Falmer
We carry out floor joint sealing and filling in warehouses, factories and industrial units in Falmer and the surrounding area. Send photos or drawings for a fixed quote.
- Saw-cut joints left open and packed with grit
- Drivers complaining about joints on a route
- A gap opening alongside old joint filler
Floor joint sealing near Falmer
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Floor joint sealing for commercial buildings in Falmer
We diagnose the floor first rather than guessing at a product: joint widths, whether the joints are still opening, what runs over them and how the edges have held up. That tells us whether semi-rigid filler or flexible sealant suits each run and the answer can differ from one zone to the next. Most enquiries involve dock area joints that have failed first and brittle joint filler breaking up, across loading bays, joints along racking aisles and saw-cut induced joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Falmer it comes down to the same thing: the right product in a properly prepared joint.
For a site near Falmer, measurements and photos up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Location
- Falmer (BN1)
- Region
- East Sussex
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Towns and villages near Falmer
Other services in Falmer
What sets the cost
The price varies from site to site. It mainly depends on:
- Removal of failed or old sealant
- Which sealant the job calls for
- Travel to remote or island sites
- Access and working height
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Any specification or named product
- Clear photographs of the problem areas
- Rough lengths or quantities, or drawings if you have them
- Whether the building will be occupied during the work
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
What the job involves on each surface
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. We match the product to the wheel types and the traffic.
Saw-cut induced joints
Saw cuts are made soon after the slab is cast so shrinkage cracks follow a line. They start narrow and widen as the concrete dries, and on truck routes they need a filler that supports the edges.
Where floor joints take the most wear near Falmer
Falmer sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and gritting in cold spells finds its way into open joints. Falmer is about 44 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day.
University campuses such as University of Sussex, under half a mile north-west of Falmer, have car parks, paved walkways and building elevations with movement joints. At a retail site such as Pavilion Retail Park, which lies south-west of Falmer, trolleys, cages and cars run over floor and slab joints all day. Phasing is what makes joint work possible on busy sites such as Westergate Business Centre (1.5 miles south-west of Falmer): one bay, aisle or car park row at a time.
Falmer is about 3 miles north-east of Brighton, in East Sussex. Across the BN1 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 308 places in East Sussex, from busy centres to rural villages.
Anyone looking for floor joint sealing in BN1 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Middle Street, Park Street and Mill Street, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Kingston near Lewes (2 miles east), Iford (3 miles east), Ovingdean (3 miles south), Rottingdean (3 miles south) and Roedean (3 miles south). Further afield, our area takes in Seaford (10 miles south-east), Lewes (4 miles east), Hailsham (15 miles east), Uckfield (11 miles north-east), Newhaven (7 miles south-east) and Peacehaven (6 miles south-east).
What’s near Falmer
Locally, jobs take us to sites close to Stanmer Park, University of Sussex Library and The Swan Inn. Falmer has its own railway station: Falmer station. Nearby you will also find Brighton General Hospital (2.8 miles south-west) and Brighton And Hove Albion Football Club Museum (under half a mile south-west). Open spaces near Falmer include Bevendean Down and Newmarket Hill.
Doing it in-house
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- A floor that rocks at the joints, which needs a structural fix
- Broken concrete either side of the joint
- Worn screed or surface finishes
If you’re not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
What we seal
- Forklift and pallet-truck routes
- Construction joints
- Joints along racking aisles
- Loading bays
- Saw-cut induced joints
- Retail and showroom floors
FAQs: Falmer
Will you take on work at estates like Fairway Industrial Estate, close to Falmer?
Yes. We cover Falmer and the area around it, including industrial estates, business parks and retail parks such as Fairway Industrial Estate. Send details of the unit and the work through our quote form for a quick quote.
Is Falmer off your patch?
No. Places such as Falmer are covered as much as the big towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
How a job runs
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. For work around Falmer, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Preparing the site
- Confirm the product named in the specification
- Point out parking and an unloading spot
- Move anything stored against the joints
Quotes
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, phone 01277 525 020 or send details through our quote form.