Industrial and floor joint sealing in Dawesgreen, Surrey
Planning work on a floor joint in Dawesgreen? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Untidy open joints in a retail unit
- Joint fill separating from the concrete
- Joint edges breaking up under truck wheels
Floor joint sealing in Dawesgreen
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
About our floor joint sealing in Dawesgreen
We have been sealing commercial joints since 2005. Applicators carry CSCS cards and work to your site rules, and we are CHAS accredited and a Constructionline member, with public liability insurance in place. Completed joints come with a 12-month guarantee on our workmanship. We work on forklift and pallet-truck routes, joints along racking aisles and loading bays, and what we are called in for most is filler that has parted from one face and soft sealant dragged out of trafficked joints. A single leaking joint is often how a building in Dawesgreen first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places such as Dawesgreen, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Where
- Dawesgreen (RH2)
- Region
- Surrey
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Flexible floor sealants
A flexible sealant suits perimeter and movement joints away from the heaviest traffic. Backing rod limits how deep the bead goes and keeps it off the joint bottom.
Construction joints
Where a day joint crosses a truck route, its edges take heavy punishment. Movement and traffic are both checked before we decide what goes in.
Towns and villages near Dawesgreen
Also in Dawesgreen
When something else is needed
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- A floor that is out of level for the racking or trucks
- Cracks across panels caused by settlement or overload
- Broken concrete either side of the joint
If you’re not sure, just ring 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Surfaces we seal
- Saw-cut induced joints
- Forklift and pallet-truck routes
- Joints along racking aisles
- Retail and showroom floors
- Construction joints
- Loading bays
Joints that move: notes for Dawesgreen
Dawesgreen has two named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. At about 21 miles from central London, Dawesgreen is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds.
Across sites such as Fontigarry Farm Business Park (2.7 miles east of Dawesgreen), floor and movement joints can be sealed in phases so units keep working. Schools such as Burys Court School have movement joints in their walls and floors that are easy to overlook. Business parks such as Chesterfield Business Park (2.4 miles north-east of Dawesgreen) have car parks, paved areas and long brick and panel elevations, all with movement joints.
Dawesgreen is about 3 miles south-west of Reigate, in Surrey. Commercial clients in Dawesgreen use us for work on floor joints. Across Surrey, 379 places are covered, Dawesgreen among them. We also cover London, around 21 miles from Dawesgreen.
Commercial sites across RH2 are covered. We cover commercial and managed buildings on Tapner's Road and Bunce Common Road and the roads nearby. Sites close to Dawesgreen are covered too, including Leigh (1 mile south-east), Bunce Common (1 mile west), Strood Green (1 mile north-west), Irons Bottom (2 miles east) and Brockham (2 miles north-west). A short drive away, we cover Guildford (14 miles west), Epsom (9 miles north), Horley (4 miles south-east), Redhill (4 miles north-east), Ewell (10 miles north) and Reigate (3 miles north-east).
Local landmarks in Dawesgreen
In Dawesgreen, that means premises near The Seven Stars Public House and the streets around them. Dawesgreen’s nearest station is Betchworth station, about 2.6 miles north. Well-known places in the area include East Surrey Hospital (4 miles east) and Reigate Priory Museum (2.8 miles north-east). For a walk, there’s Reigate Heath and Colley Hill.
What affects the price in Dawesgreen
To price the job, we consider:
- The size and state of each joint
- How accessible the joints are
- Location, for remote and island sites
- The site’s rules and procedures
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Access details, including height
- Any specification or named product
- What the building is and how it’s used
- The site address and postcode
To get a fixed quote, phone 01277 525 020 or send photos by email. You can also send details through our quote form.
Commercial clients in Dawesgreen
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
How a job runs
Working in a building that stays open takes some planning. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. For work around Dawesgreen, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Each joint is cut or routed back to clean, sound concrete.
- We extract the dust and prime the faces if the product needs it.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
Before we start on site
- Tell us your opening times and when work is allowed
- Clear stock, furniture or equipment away from the joints
- Share the asbestos register for older buildings
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or use the quote form if you’d rather talk the job through.
Read more
Questions about Dawesgreen
Can you work on a hospital site such as East Surrey Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Is Chesterfield Business Park, near Dawesgreen, within your area?
Yes. We cover Dawesgreen and the area around it, including industrial estates, business parks and retail parks such as Chesterfield Business Park. Send details of the unit and the work through our quote form for a quick quote.
How long does a job like this take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Which is better for warehouse joints, filler or sealant?
We decide joint by joint. Where hard wheels cross, a semi-rigid filler is usually right and perimeter or movement joints need flexibility. You will see the choice for each area in the quote.
What information helps you price floor joint sealing?
A rough joint length, a few photos and a site plan are usually enough for a quick quote. For larger floors, a site visit is often best so speak to us on 01277 525 020 or email a schedule or drawings to set one up.
Can you fill joints where the arrises have spalled?
Edge condition is recorded when we look at the floor. Damaged edges are flagged up front so the filling isn’t wasted.
Can you phase floor joint work around operations?
Typically only the zone we’re working in has to close. Traffic returns to each zone once it has cured and the next zone follows.