Dawesgreen expansion joint sealing
Expansion joint sealing in Dawesgreen, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Rain penetration at brick or block movement joints
- Chipped joint edges on forklift routes
- Leaks through car park deck joints onto the level below
Expansion joint sealing across Dawesgreen
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
General trades versus a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Expansion joint sealing in Dawesgreen
For movement joints in Dawesgreen, photos and approximate lengths are the best start. Send them through our quote form, and we will arrange a site visit if needed, then send a fixed quote that names the sealant. To discuss the joints first, speak to us on 01277 525 020 or send details through our quote form. We work on brickwork movement joints, podiums and floor movement joints and cladding panel joints, and what we’re called in for most is new sealant over old, now failing and brittle, chalky sealant on external joints. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Dawesgreen is the same: the right product in a properly prepared joint.
In and around smaller places like Dawesgreen, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Place
- Dawesgreen (RH2)
- Wider area
- Surrey
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Share these points with them:
- Keep scrapers and ploughs from dragging across joint sealant
- Clear dirt from joint lines during routine cleaning
- Inspect exposed joints once the cold weather has passed
- Avoid parking heavy plant or pallets on joint lines
On car parks, winter clearance can damage deck joint sealant. Lifting the blade at each joint avoids tearing the bead and a look at the joints after winter catches any damage.
Once debris packs a failed joint, the structure has nowhere to expand. The edges then take the pressure and start to spall. A sound seal keeps the joint working.
Expansion joint sealing around Dawesgreen: what changes locally
Central London is about 21 miles from Dawesgreen. The roads out of London are lined with trade parks and distribution sheds. Dawesgreen is in the South East, one of the UK’s drier regions. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in.
In a school such as Burys Court School, movement joints in brick, block and hall floors tend to be forgotten until they leak. At places like Fontigarry Farm Business Park, which lies east of Dawesgreen, joints are sealed a section at a time so operations carry on.
Dawesgreen is about 3 miles south-west of Reigate, in Surrey. We cover Dawesgreen, with the same fixed quotes and 12-month guarantee as everywhere else. Dawesgreen is one of 379 places in Surrey on our list for movement joints. We also cover London, some 21 miles away.
Business premises anywhere in RH2 are within our area. Streets here include Tapner's Road and Bunce Common Road. Close to Dawesgreen, our area also takes in Leigh (1 mile south-east), Bunce Common (1 mile west), Strood Green (1 mile north-west), Irons Bottom (2 miles east) and Brockham (2 miles north-west). Further afield, our area takes in Guildford (14 miles west), Epsom (9 miles north), Horley (4 miles south-east), Redhill (4 miles north-east), Ewell (10 miles north) and Reigate (3 miles north-east).
What’s near Dawesgreen
Around Dawesgreen, our work takes us to commercial buildings near The Seven Stars Public House, among other places. The nearest railway station is Betchworth station, about 2.6 miles north. Nearby you will also find East Surrey Hospital (4 miles east) and Reigate Priory Museum (2.8 miles north-east). Not far away are Reigate Heath and Colley Hill.
When to call us in Dawesgreen
Most movement joint failures come down to the joint stretching further than the sealant can take. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way, so we check width and movement before quoting.
Look out for the following:
- Layers of sealant in a movement joint
- Movement joints with split or torn sealant
- Car park joints leaking onto vehicles below
- Sealant pulling off the joint face
Office parks like Chesterfield Business Park (to the north-east of Dawesgreen) have decks, ramps and clad elevations whose joints take movement every day.
Comparing quotes
- Whether their applicators hold CSCS cards
- Whether primer will be used where the manufacturer specifies it
- What level of public liability insurance do they hold?
- Are they CHAS accredited or on Constructionline?
Questions we are asked in Dawesgreen
Is Dawesgreen off your patch?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Will you take on work at estates like Chesterfield Business Park, close to Dawesgreen?
Yes. We cover Dawesgreen and the area around it, including industrial estates, business parks and retail parks such as Chesterfield Business Park. Send details of the unit and the work through our quote form for a quick quote.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
How long before the joints can be used?
We will confirm how long the chosen product needs to cure.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, with the work itself usually taking a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases. Rural sites near Dawesgreen may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Confirm the product named in the specification
- Warn occupants and staff about the work
- Let us know about inductions and permits
Get a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or phone 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Read more
Cost factors for movement joints
Before we quote, we look at:
- Any access equipment needed
- The total length or number of joints
- The site’s rules and procedures
- Travel to remote or island sites
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a quote when you are ready.
What we need to price the job
Diagnosis starts before we arrive. Let us know:
- The type of building and who uses it
- The site address and postcode
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call 01277 525 020 or email us.
What happens if it’s left?
Resealing is typically the answer, not replacing the element. If the material either side is sound, a properly prepared reseal restores the joint. If the edges have broken up, we’ll tell you they need repairing first. Halls, stores and units around places like Dawesgreen may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
What you get with us
- Standard and matched colours in many product ranges
- Fully insured, including public liability cover
- Failed material removed, not covered up
- One number for every site we cover
Read how commercial sealant jobs are priced or how we’re accredited.