The Mastic Doctor team standing beside their branded vans outside an office building
Na h-Eileanan Siar · Scotland

Industrial and floor joint sealing in Carloway, Na h-Eileanan Siar

Floor joint sealing and filling in warehouses, factories and industrial units across Carloway, by CSCS-carded applicators. Fully insured and CHAS accredited.

  • A gap opening alongside old joint filler
  • Brittle joint filler breaking up
  • Open saw cuts full of debris
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Signed off, with 12 months’ guarantee.
London, the South East & Scotland
Constructionline member
£5m PL insurance

Floor joint sealing for businesses in Carloway

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Floor joint sealing in Carloway: the local picture

Carloway is within about 2 miles of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. Carloway is on Scotland’s wetter western side. Rainwater through open yard and deck joints is a bigger issue here than in the drier east. Dry spells are used for the external joints.

For floors and slabs around Carloway, the product is chosen for the traffic and the movement at each joint. A joint near Carloway that has lost its sealant lets in water and grit, and the edges suffer next.

Carloway (Gaelic: Càrlabhagh) is in Na h-Eileanan Siar. We cover Carloway, with the same fixed quotes and 12-month guarantee as everywhere else. Carloway is one of 87 places in Na h-Eileanan Siar on our list.

Commercial sites across HS2 are covered. If your building is just outside Carloway, we cover Na Gearrannan (1 mile north-west), Shawbost (4 miles north-east), Breasclete (4 miles south), Bragar (6 miles north-east) and Barabhas (10 miles north-east). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.

Local landmarks in Carloway

A little further out are Gearannon Blackhouse Village (1.4 miles north-west). The countryside around Carloway includes Loch Langavat.

Map of Carloway © OpenStreetMap contributors

Floor joint sealing for commercial buildings in Carloway

Mastic Doctor has worked on joints in commercial buildings for over 20 years. Applicators carry CSCS cards and work to your site rules, and the business is CHAS accredited and a Constructionline member, with public liability insurance in place. Finished floor joints in Carloway carry our 12-month guarantee. The enquiries we see most involve unfilled floor joints collecting dirt and grit and broken arrises where pallet trucks cross, across saw-cut induced joints, forklift and pallet-truck routes and retail and showroom floors. Looking for mastic applicators who cover Carloway? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.

For floor or movement joints around smaller places like Carloway, we plan to finish in one visit where we can. Send photos, joint widths and details of the traffic first.

What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.

Location
Carloway (HS2)
Wider area
Na h-Eileanan Siar
Guarantee
12 months on our workmanship
Quotes
A fixed quote before we start
Call
01277 525 020
Page updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Doing it in-house

There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.

For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

Looking after the joints

Cleaning and maintenance staff play a part too. Pass these on to them:

  • Treat loading bay joints first if they’re failing
  • Expect fillers on young slabs to need a top-up
  • Hold traffic back until the product has cured
  • Ask drivers not to drag forks or pallets

Normal floor cleaning is fine once the product has cured. Tell us about aggressive cleaning products or hot washing at quote stage so we choose something that tolerates them.

Edges tend to break slowly at first, then quickly. Each chip makes the drop deeper and the next impact harder, so it pays to act at the first signs.

What the job involves on each surface

Construction joints

Construction joints, sometimes called day joints, mark where one pour ended and the next began. They often see more movement than sawn joints and that shapes the choice of filler or sealant.

Saw-cut induced joints

Saw cuts are made soon after the slab is cast so shrinkage cracks follow a line. They start narrow and widen as the concrete dries so trafficked runs need a filler that holds the arrises.

Common questions from Carloway clients

Do we have to stop operations in Carloway while the joints are sealed?

Rarely. Work is phased around your operations. Tell us which hours and entrances we can use and we will plan from there.

Is Carloway inside the area you cover, given it’s on an island?

Yes. Islands are part of our area, Carloway included. We plan island jobs around the ferry and the forecast, and bring everything the job needs on the first crossing.

Are you fully insured?

Yes. Our insurance certificate can be sent alongside the quote.

What information helps you price floor joint sealing?

Approximate metres of joint, photographs of typical and worst areas, and a floor plan are typically enough for a quick quote. For larger floors, a site visit is often best so call 01277 525 020 or send details through our quote form to set one up.

Does weather matter for sealant work?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.

How long before trucks can use the joints?

Cure times vary with the product and how cold the slab is. We’ll give you a time for each zone when we agree the phasing.

Do you use semi-rigid filler or flexible sealant on floor joints?

It depends on the traffic and the movement. Forklift routes generally call for a semi-rigid filler that holds the arrises and joints with more movement take a flexible sealant.

Why act early in Carloway

A floor coating laid over open joints soon cracks along the joint lines. The joints have to be filled or sealed as joints, whether or not the floor is coated. Around smaller places like Carloway, halls, stores and seasonal buildings may not be checked often, giving water time to get in. Early resealing prevents it.

Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.

Why us?

  • Work to your specification and the manufacturer’s guidance
  • Sealing commercial buildings since 2005
  • Fixed quotes based on photos, drawings or a visit
  • Fully insured

See our cost guide or our accreditations and insurance.

Our process

We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. Where we can, we combine work around Carloway with other jobs nearby. Tell us how flexible your dates are.

  1. First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
  2. You get a fixed quote with the product and the phasing set out.
  3. We remove failed material and packed debris until sound concrete is exposed on both faces.
  4. Dust is extracted from the joint and primer applied where the manufacturer specifies it.
  5. The chosen product is placed to its specified depth and trimmed level with the floor.
  6. Each phase reopens when the product is ready for wheels, then we start the next.

What we need from you

  • Send any specification or drawings in advance
  • Share your working hours and any access restrictions
  • Let building users know which areas are affected

Ask for a quote

The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email the details over to discuss it first.

Get a quick quote

Advice

What sealant work can’t fix

A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be one of these:

  • Spalled arrises, which need an edge repair first
  • A floor that rocks at the joints, which needs a structural fix
  • Damaged or worn floor coatings and screeds

If you’re not sure, just call 01277 525 020 or send details through our quote form and we’ll give you a straight answer before you book.

What we seal

  • Loading bays
  • Saw-cut induced joints
  • Retail and showroom floors
  • Joints along racking aisles
  • Construction joints
  • Forklift and pallet-truck routes
Accreditations

Trusted. Accredited. Insured.