Industrial and floor joint sealing in Broad Street, Kent
Planning work on a floor joint in Broad Street? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Cracked and crumbling joint fill
- Chipped and spalling edges along forklift routes
- Drivers complaining about joints on a route
Need floor joint sealing in Broad Street?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our floor joint sealing in Broad Street
We work on warehouse aisles, dock areas, factory floors, retail units and showrooms. Each job is priced from the metres of joint, their condition and the access windows we get and the figure is fixed before work begins. The enquiries we see most involve broken arrises where pallet trucks cross and sealant pulled out along a truck route, on loading bays, forklift and pallet-truck routes and saw-cut induced joints. One point of contact handles commercial sealant work in Broad Street from the first photos to the final walk-round, whether it’s one building or several.
For a site near Broad Street, measurements and photographs up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Broad Street (ME17)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Our process
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. For work around Broad Street, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- A floor survey records every joint, its edges and what crosses it.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- We hand each phase back when it can take traffic.
Before we start on site
- Arrange parking or a loading space
- Let us know about inductions and permits
- Share your working hours and any access restrictions
Getting a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Related advice
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Photograph any joint that starts to chip
- Mention any aggressive cleaning regime at quote stage
- Keep trucks off new joints until we say they’re ready
- Check joint lines on busy aisles regularly
Young concrete carries on shrinking, so some fillers part slightly from one face. That is common and is typically dealt with by topping up once the slab has settled down.
Treating joints while the arrises are sound keeps the work simple. Once they have broken away, edge repair comes first, with more downtime and more disruption.
For managing agents and facilities managers
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Why act early in Broad Street
Not every joint needs stripping out completely. If old material is sound on one face and only a fine gap has opened, it may not all have to come out and the quote shows which approach suits each run. Halls, stores and units around places like Broad Street may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why choose Mastic Doctor in Broad Street
- Fully insured
- Specification-led, product-correct work
- Health and safety: CHAS accredited
- Old sealant cut out, never sealed over
Take a look at what affects the cost or how we’re accredited.
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be any of the following:
- Worn screed or surface finishes
- Unstable slabs moving under traffic
- Uneven floors that need grinding or levelling
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
Joints and surfaces we work on
- Retail and showroom floors
- Forklift and pallet-truck routes
- Construction joints
- Saw-cut induced joints
- Joints along racking aisles
- Loading bays
Towns and villages near Broad Street
What else we do in Broad Street
Floors, slabs and movement joints in Broad Street
Rainfall across the South East, Broad Street included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. Broad Street lies roughly 34 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
A healthcare site such as KIMS Hospital (to the west of Broad Street) depends on car parks, ramps and service yards whose joints take traffic all day. For estates staff at a university like Canterbury Christ Church University (2.6 miles east of Broad Street), building and paving joints are part of the planned maintenance list.
Broad Street is about 4 miles east of Maidstone, in Kent. Any commercial site in Broad Street is covered. Our Kent coverage takes in 931 places, from busy centres to rural villages. We also cover London, some 34 miles away.
Anyone looking for floor joint sealing in ME17 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Broad Street Hill and Pilgrims Way are within our area for floor joints. Close to Broad Street, our area also takes in Hucking (1 mile north-east), Hollingbourne (1 mile south-east), Eyhorne Street (1 mile south), Ashbank (2 miles south) and Bicknor (2 miles north-east). Further afield, our area takes in Maidstone (4 miles west), Ashford (14 miles south-east), Sittingbourne (6 miles north-east), Gravesend (15 miles north-west), Faversham (12 miles east) and Minster (12 miles north-east).
Near you in Broad Street
Around Broad Street, our work takes us to commercial buildings near Hook and Hatchet pub and White Horse Wood and the streets around them. The closest station to Broad Street is Hollingbourne station, about 1.1 miles south. Nearby you’ll also find Leeds Castle (2.3 miles south) and KIMS hospital (2.9 miles west). Green spaces nearby include Detling Hill.
Questions about Broad Street
Must our site in Broad Street stop work while the joints are done?
Rarely. Work is phased around your operations. We agree the sequence and timings with you before we start.
Is Broad Street too far out for you?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
When can forklifts run over new joint filler?
Cure times vary with the product and the conditions. You’ll get a reopening time for each area when we agree the phasing.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member.
Can you fill joints where the arrises have spalled?
Edge condition is recorded when we look at the floor. Where they have broken away, we will tell you before quoting the filling, so nothing is filled that won’t hold.
How long does a job like this take?
That varies with the scale of the job, but the work normally takes between a day and a number of days, set by the joint lengths, the edge condition and the phasing you need. For bigger or phased jobs, we will set out a timescale with the quote.
Different surfaces, different methods
Loading bays and dock areas
At loading bays, product choice has to suit the loads, the temperature and the wet. Phasing is planned around your delivery schedule.
Saw-cut induced joints
Open saw cuts collect grit and break at the arris. Filling them early keeps them tidy and protects the edges.