Floor Joint Sealing in Appleshaw
Floor joint sealing in Appleshaw, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Unfilled floor joints collecting dirt and grit
- Chipped and spalling edges along forklift routes
- Dock area joints that have failed first
Floor joint sealing for Appleshaw sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. If others near Appleshaw need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- First comes a walk of the floor to record joint sizes, broken edges and traffic routes.
- The quote fixes the price, names the filler or sealant and shows how the floor will be zoned.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is extracted from the joint and primer applied where the manufacturer specifies it.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- We tell you when each zone can carry trucks again and move on to the next.
Before we start on site
- Share the asbestos register for older buildings
- Point out any areas we must not close
- Explain the parking and delivery arrangements
Ask for a quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or send details through our quote form.
Related advice
Floor joint sealing in Appleshaw, done properly
Forklifts and pallet trucks are hard on open joints. Every pass chips at the bare concrete edge, and over time a neat cut turns into a ragged channel. A properly filled joint carries the wheel over and protects both arrises, which is kinder to trucks, loads and operators. Site teams most often ask us about joint fill separating from the concrete and untidy open joints in a retail unit, on retail and showroom floors, saw-cut induced joints and joints along racking aisles. Whoever orders the work in Appleshaw, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Around smaller places such as Appleshaw, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Appleshaw (SP11)
- Region
- Hampshire
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Questions we’re asked in Appleshaw
Can you take on a job at a hospital such as Andover War Memorial Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Is a smaller place like Appleshaw outside your area?
No. Places such as Appleshaw are covered as much as the big towns. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Do you guarantee industrial floor joints?
Every job has our 12-month guarantee. It applies to our workmanship rather than structural movement or accidental damage.
Does the weather affect the work?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Can you send site paperwork?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Can the warehouse stay open while you work?
Normally only the zone we’re working in has to close. Each zone reopens when the product can take traffic, then we move to the next.
How the job changes by surface
Saw-cut induced joints
Open saw cuts collect grit and break at the arris. Filled in good time, they stay narrow and neat.
Forklift and pallet-truck routes
A route joint has to take repeated wheel strikes without breaking up. Wheel type and traffic level steer the product choice.
When to bring in a specialist
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Floor joint sealing around Appleshaw: points for this area
Appleshaw has at least three named business or industrial parks inside a 3-mile radius. Their warehouses, yards and car parks are exactly where joints take the most punishment. At about 66 miles from central London, Appleshaw is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift.
On a site such as Weyhill Business Park (1.3 miles south of Appleshaw), the movement joints are in car park slabs, paving and building elevations. At places like Andover Business Park (2.3 miles south-east of Appleshaw), joints are sealed a section at a time so operations carry on. Large sites such as Andover War Memorial Hospital (3.2 miles south-east of Appleshaw) have car parks, service roads and long elevations with movement joints in brick and panels.
Appleshaw is about 4 miles north-west of Andover, in Hampshire. We cover Appleshaw and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. Appleshaw is one of 723 places we cover in Hampshire for floor joints. Southampton is covered too, some 23 miles away.
Work on floor joints is covered throughout SP11, whatever the building. If your site is on Greensey and West Park or close by, send details and we’ll quote for floor joints. If your building is just outside Appleshaw, we cover Redenham (1 mile north-west), Clanville (1 mile north-east), Faberstown (1 mile west), Weyhill (1 mile south) and Fyfield (2 miles south-west). Bigger towns within reach include Andover (4 miles south-east), Tidworth (4 miles west), Weeke (15 miles south-east), Ludgershall (3 miles north-west), Whitchurch (10 miles east) and East Anton (4 miles east).
Near you in Appleshaw
Locally, jobs take us to sites close to Walnut Tree Inn, among other places. The nearest railway station is Andover station, roughly 3.4 miles south-east of the centre. Well-known places in the area include Andover War Memorial Hospital (3.2 miles south-east) and Ludgershall Castle (3.1 miles north-west). The countryside around Appleshaw includes Quarley Hill and Mill Lake.
What sets the cost
These are the things that shape the price:
- Which sealant the job calls for
- Distance, for remote addresses
- The total length or number of joints
- The size and state of each joint
The specified product makes a difference, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Details that help us quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Approximate linear metres or a joint schedule
- The product your specification calls for
- The postcode of the building
- Your programme or deadline
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or send details through our quote form.
Looking after the joints
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Treat loading bay joints first if they’re failing
- Mention any aggressive cleaning regime at quote stage
- Keep trucks off new joints until we say they’re ready
- Sweep debris out of open joints until they can be filled
On younger slabs, a fine line can open down one side of a filled joint as the concrete keeps shrinking. That is common and is usually dealt with by topping up once the slab has settled down in most cases.
Every day an open joint stays full of grit, the edges take more punishment. Getting it filled stops the damage while it is still a straightforward job.
Towns and villages near Appleshaw
Also in Appleshaw
Why deal with it now?
Painting or coating straight over joints rarely lasts. Joints need their own treatment, whether or not the floor is coated. For buildings around smaller places like Appleshaw, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
Pricing floor joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Why appoint us
- Commercial sealant work since 2005
- Public liability insurance in place
- A fixed quote before work starts
- Workmanship guaranteed for 12 months
See how commercial sealant jobs are priced or our accreditations.