The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Facade Sealing contractors in Appleshaw

Facade joint and window perimeter sealing on commercial buildings in Appleshaw and across Hampshire. CHAS accredited and fully insured, with a 12-month guarantee.

  • Cold air coming in at window perimeters
  • Perimeter sealant that has split or peeled away
  • New sealant peeling off old mastic
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
South East, London & Scotland
Constructionline member
Fully insured: £5m PL

Facade sealing for Appleshaw sites

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

How we handle facade sealing in Appleshaw

Every facade quote starts with how the joints will be reached. Let us know what access exists or is planned, and any site rules we need to work around, so the price covers the real job. Most enquiries involve water coming in around window frames and staining on stone next to old sealant, on coping and flashing joints, perimeter joints where frames meet the structure and cladding panel joints. For commercial sealant work in Appleshaw, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.

Sites around smaller places like Appleshaw can be a fair drive from suppliers, so we come with everything the package needs, timed to the stage the job has reached. Send drawings or photographs and the programme and we’ll quote to suit.

Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.

The Mastic Doctor team beside their liveried vans in front of an office building
Location
Appleshaw (SP11)
Wider area
Hampshire
Guarantee
12 months on our workmanship
Quotes
A fixed quote before we start
Call
01277 525 020
Last updated
3 November 2026

Honest limits

Honesty saves time and money. New sealant won’t cure:

  • Render or concrete edges that have broken away
  • Leaks from roofs, gutters or failed flashings rather than sealant joints
  • Installing or repairing glazing systems

If in doubt, give us a call on 01277 525 020 or send photos by email and we’ll say what we think.

Joints and surfaces we work on

  • Window and door perimeters
  • Cladding panel joints
  • Stone and brick facade joints
  • Coping and flashing joints
  • Shopfront frames
  • Perimeter joints where frames meet the structure

What the job involves on each surface

Coping and flashing joints

Sometimes the coping or flashing itself has failed. Where the issue isn’t the sealant, we say so.

Cladding panel joints

On sealed panel systems, every joint keeps water out. We cut out failed joints along their full length and rebuild them.

Why deal with it now?

If access is already up for other work, resealing at the same time makes sense. Combine it with planned external works and you only arrange access once, saving a second set-up. Converted and older buildings near places like Appleshaw tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.

What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.

What you get with us

  • Our applicators hold CSCS cards
  • Coloured sealants to suit the setting, where available
  • Fully insured
  • Clear, fixed quotes

Take a look at our cost guide and our accreditations.

Doing it in-house

Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.

For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

FAQs: Appleshaw

Do you cover business parks and estates near Appleshaw, such as Weyhill Business Park?

Yes. Estates, retail parks and business parks around Appleshaw, Weyhill Business Park among them, are all within reach. To start, just give us a call on 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.

Is a smaller place like Appleshaw outside your area?

No. Places such as Appleshaw are covered as much as the big towns. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.

When can the area be used after sealing?

That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.

Can you quote from photographs?

That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs normally get a visit.

Do you take on multi-site work?

Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.

Can you work while the building is occupied?

Typically, yes. Phased work can be planned so areas stay in use, with each area protected and signed.

What will the job cost?

Every job gets its own fixed quote. For yours, phone 01277 525 020 or email us with a description of the work.

How a job runs

Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Rural sites near Appleshaw may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.

  1. We plan access and the order of elevations with the client.
  2. We only seal when joints are dry and within the product’s temperature range.
  3. We remove the old bead and check the edges are sound.
  4. Faces are cleaned, primed where needed and backed.
  5. Sealant is gunned in and tooled hard onto both faces.
  6. We hand over with our 12-month workmanship guarantee.

What we need from you

  • Send any specification or drawings in advance
  • Share your working hours and any access restrictions
  • Tell us which areas need to stay in use

Getting a fixed quote

Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, ring 01277 525 020 or use the quote form.

Get a price

Related advice

Work for main contractors and building owners

As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.

We work for building owners and managing agents on everything from one building to a spread of sites around Appleshaw. Several sites can go on one quote, which keeps the paperwork simple.

Facade sealing around Appleshaw: how the place shapes the job

Appleshaw is in the South East, one of the UK’s drier regions. Winter mornings still bring frost and condensation on frames and panels, so external mastic is timed for workable conditions and agreed with the site manager. Appleshaw lies roughly 66 miles out from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, so mastic packages have to keep pace with busy programmes.

Projects at schools like Appleshaw St Peter's CofE Primary School work to term dates, so mastic is programmed tightly. When units on a site such as Weyhill Business Park, 1.3 miles to the south of Appleshaw, are refurbished or reclad, the panel joints and window perimeters are part of the mastic package. For a contractor working at a hospital such as Andover War Memorial Hospital (3.2 miles south-east of Appleshaw), perimeter and facade sealing is planned around patients and deliveries.

Appleshaw is about 4 miles north-west of Andover, in Hampshire. If you are looking for facade sealing in Appleshaw, we can help, as we do across Hampshire. Across Hampshire, 723 places are covered, including Appleshaw. For work in that direction, see our Southampton page, about 23 miles away.

Work on facade joints is covered throughout SP11. Streets here include Greensey and West Park, and sites on any of them can send details for a fixed quote. Just outside Appleshaw, we also work in Redenham (1 mile north-west), Clanville (1 mile north-east), Faberstown (1 mile west), Weyhill (1 mile south) and Fyfield (2 miles south-west). Further afield, our area takes in Andover (4 miles south-east), Tidworth (4 miles west), Weeke (15 miles south-east), Ludgershall (3 miles north-west), Whitchurch (10 miles east) and East Anton (4 miles east).

Landmarks near Appleshaw

In Appleshaw, that means premises near Walnut Tree Inn. For rail, the closest station is Andover station, roughly 3.4 miles south-east of the centre. A little further out are Andover War Memorial Hospital (3.2 miles south-east) and Ludgershall Castle (3.1 miles north-west). Not far away are Quarley Hill and Mill Lake.

Map of Appleshaw © OpenStreetMap contributors
Accreditations

Trusted. Accredited. Insured.