Fire stopping in Wyke
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Wyke and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Fire-stopping items raised at inspection or handover
- Openings left by services added after handover
- Hidden openings found during inspections
Fire stopping for Wyke sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Wyke
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. We work on linear gaps at wall heads, cable penetrations and joints between fire-resisting walls and floors, and the usual reasons a site gets in touch are damaged fire seals in risers and voids and openings left by services added after handover. Whoever orders the work in Wyke, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
For a smaller site near Wyke, we plan to do all the penetrations in one go, so send the specification and photos first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Wyke (GU12, GU3)
- Region
- Surrey
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Wyke can form part of a wider programme across Surrey.
What we are called out for in Wyke
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
Common reasons buildings call us in:
- Openings found when ceilings come down for a refit
- Fire stopping installed outside its tested range
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
Workshops and IT rooms at colleges like Aldershot College (1.8 miles west of Wyke) are re-serviced often, leaving penetrations to seal.
Questions to ask before you book
- The named product and why it was chosen
- Do they follow the manufacturer’s priming guidance?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Proof of insurance
How a job runs
At the end of each section, we remove the tape, clean down and inspect every joint with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in and around smaller places like Wyke are typically planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Flag any permit to work we will need
- Send any specification or drawings in advance
- Move anything stored against the joints
Request a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or ring 01277 525 020 or email the details over to discuss it first.
Related advice
Wyke: questions and answers
Can you work on a hospital site such as Guildford Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Can you work around term dates at a campus such as University of Surrey - Manor Park Campus?
Yes. We plan campus work around teaching, exams and residence turnarounds. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Do you seal on top of existing sealant?
No. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
Do you offer coloured sealant?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
How do you deal with asbestos in old sealant?
Managing asbestos is the dutyholder’s responsibility, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Compartments and services around Wyke
Central London is about 31 miles from Wyke. Office refits around the commuter belt bring new cabling through fire-resisting walls. Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Industrial units on estates such as Hollybush Industrial Estate (to the north-west of Wyke) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. Halls and meeting rooms at places like Church of St Peter sometimes gain new services, and any compartment wall crossed needs the specified seal.
Wyke is about 3 miles east of Aldershot, in Surrey. Wyke sits inside our coverage and the rest of Surrey, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 379 places across Surrey fall within our area, including Wyke. For work in that direction, see our Reading page.
We take on service penetrations across the GU12 and GU3 postcode area, for business premises of every kind. We cover commercial and managed buildings on Guildford Road, Wyke Lane and Wyke Avenue and the roads nearby. Close to Wyke, our area also takes in Normandy (1 mile east), Flexford (1 mile south-east), Christmas Pie (2 miles south-east), Willey Green (2 miles east) and Wanborough (2 miles south-east). Bigger towns within reach include Guildford (5 miles east), Woking (7 miles north-east), Camberley (6 miles north), Farnham (5 miles south-west), Egham (14 miles north-east) and Walton-on-Thames (15 miles north-east).
Near you in Wyke
Around Wyke, our work takes us to commercial buildings near The Dover Arms and Ash Manor School and the streets around them. The closest station to Wyke is Ash station, roughly 0.6 miles south-west of the centre. A little further out are Ash Museum (0.8 miles west) and Guildford Hospital (3.9 miles east). For a walk, there’s Ash Ranges and Hog's Back.
What the job involves on each surface
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, with backing added if the detail requires it.
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail.
Also in Wyke
Leave it or put it right?
An unsealed opening affects more than fire safety: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these and the building feels the difference. Around Wyke, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
What you get with us
- Failed material removed, not covered up
- One number for every site we cover
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
See what affects the cost or our accreditations and insurance.