The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Wingham fire stopping

Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Wingham and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.

  • Head-of-wall gaps with no fire seal
  • Fire-rated sealant that has cracked or shrunk back
  • Unsealed openings around new pipes and cables
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS accredited
Fully insured: £5m PL

Fire stopping across Wingham

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Compartment walls and floors in Wingham

Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. Central London is about 59 miles from Wingham. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls; the gaps need the specified seal.

In a school such as Wingham Primary School, fire-rated sealant goes in around service penetrations where it is specified. Wherever services are added at a hospital such as St Martins Hospital, 4.7 miles to the west of Wingham, the compartment line has to be made good with the specified product.

Wingham is about 6 miles east of Canterbury, in Kent. We send applicators to Wingham for service penetrations, handled exactly as we handle every other area. Across Kent, 931 places are covered, including Wingham. London is covered too, around 59 miles from Wingham.

Business premises anywhere in CT3 are within our area for service penetrations. If your site is on High Street, St Mary's Meadow and Harris's Alley or close by, send details and we will quote for service penetrations. We also cover Broomhill (1 mile north), Well Head (1 mile south-east), Wingham Green (1 mile west), Wingham Well (1 mile south-west) and Shatterling (1 mile north-east). Nearby towns on our patch include Canterbury (6 miles west), Margate (10 miles north-east), Dover (10 miles south), Folkestone (13 miles south), Ramsgate (10 miles north-east) and Broadstairs (11 miles north-east).

Around Wingham

Around Wingham, our work takes us to commercial buildings near The Red Lion pub and the streets around them. Wingham’s nearest station is Adisham station, about 2.3 miles south. A little further out are St Martins Hospital (4.7 miles west).

Map of Wingham © OpenStreetMap contributors

Fire stopping for commercial buildings in Wingham

Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. If you’re dealing with head-of-wall gaps with no fire seal and fire stopping installed outside its tested range, we can help. Looking for mastic applicators who cover Wingham? We have been sealing commercial buildings since 2005, with CSCS-carded applicators.

Around smaller places like Wingham, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.

Work we carry out comes with a 12-month guarantee. If an installation problem shows up, ring 01277 525 020 or send details through our quote form and we’ll arrange a return visit.

The Mastic Doctor team beside their liveried vans in front of an office building
Place
Wingham (CT3)
Region
Kent
Guarantee
A 12-month guarantee
Price
Fixed quote, scope in writing
Phone
01277 525 020
Last updated
3 November 2026

What sets the cost

Sealant work doesn’t have a standard rate, because every site is different. What we look at:

  • Backing rod, priming and other preparation
  • Location, for remote and island sites
  • Induction, permit and paperwork requirements
  • Quantities, in metres or numbers

There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.

What to include in your enquiry

The more we know, the firmer the quote. When you get in touch, include:

  • The product your specification calls for
  • Drawings or a marked-up plan, if available
  • Whether an asbestos survey exists
  • A wide shot and a close-up of the area

Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, give us a call on 01277 525 020 or send photos by email.

Common questions from Wingham clients

Is Wingham too far out for you?

Not at all. Wingham is within our area. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.

How does the move away from BS 476 affect penetration seals in Wingham?

From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.

Can you work to our specification?

Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.

How do we ask for a quote?

The quote form is the simplest route, though you can also phone 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.

Is your workmanship covered by a guarantee?

Yes. Our workmanship is backed for 12 months.

Will your applicators have CSCS cards?

Yes. Should the site need card details in advance, let us know and we will send them with the quote.

Are you fully insured?

Yes. We’re fully insured, including public liability cover.

Aftercare for building managers

Keep the joints in good shape with a few simple steps:

  • Flag new cables with no seal around them
  • Brief every trade that openings they make must be sealed
  • Get seals inspected before ceilings and boxing close
  • Foam or ordinary sealant is never a fire-seal repair

Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.

Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.

What we are called out for in Wingham

Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.

Clients normally get in touch after noticing something like this:

  • Snag lists that include open service penetrations
  • Openings left by services added after handover
  • Fire sealant pulled out of the opening
  • Seals that don’t match their tested detail

Industrial units on estates such as Wingham Industrial Estate, under half a mile south-east of Wingham, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.

What your quote should include

  • What the guarantee covers, and for how long
  • Health and safety accreditation such as CHAS
  • Do they follow the manufacturer’s priming guidance?
  • Whether old or failed sealant will be cut out, not overlaid

How to choose a sealant contractor

On site: what to expect

Before we leave any area, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Wingham, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.

  1. First we confirm the product and tested details named in the specification.
  2. We sort the openings by the detail each one needs.
  3. Improvised fillers and failed sealant are removed.
  4. Mineral wool or other backing is fitted where required.
  5. Fire-rated or intumescent sealant goes in around the services and is tooled off.
  6. We walk the completed areas with you and confirm the records agreed at quote stage.

Before we start on site

  • Agree which areas must stay open
  • Have the specification and drawings to hand
  • Tell us your opening times and when work is allowed

Ask for a quote

Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or email drawings and photos with what you know.

Get a quick quote

Advice

Building owners, agents and FMs in Wingham

As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

Surface by surface

Linear joints

Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, along the full length of the run.

Risers and ceiling voids

Openings above suspended ceilings are easy to miss. We work through the areas on your schedule methodically and tell you about openings outside the list.

Accreditations

Trusted. Accredited. Insured.