Fire-rated sealing and fire stopping in Westwood, Kent
Fire stopping in Westwood, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Old intumescent sealant that has split away
- Openings found when ceilings come down for a refit
- Damaged fire seals in risers and voids
Fire stopping near Westwood
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Quoting for work in Westwood
These are the things that shape the price:
- The total length or number of joints
- How accessible the joints are
- Travel to remote or island sites
- How much existing material needs removing
There’s no price list, since every building and every scope is different. Call for a quote.
Details that help us quote
We can often quote from photographs and a few details. Please tell us:
- Photos of the joints, close up and from further back
- Asbestos survey details if the building is older
- The type of building and who uses it
- When you need the work done
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
About our fire stopping in Westwood
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, speak to us on 01277 525 020 or send details through our quote form with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on small duct penetrations where the tested detail allows, cable penetrations and pipe penetrations, and the failures we are asked to look at most are fire sealant pulled out of the opening and seals disturbed by maintenance and left open. One point of contact handles commercial sealant work in Westwood from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Converted and extended buildings around places like Westwood can mix old and new construction, so the wall or floor a service passes through isn’t always what the drawings assume. We match the product to the substrate and service, and say so if a collar, wrap or batt is the specified item.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Westwood (CT9, CT10)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Westwood
Can you seal around new services in a hotel near Westwood?
Yes, where fire-rated sealant is the specified product. Each seal follows the tested detail, and rooms are done in turn.
How does the move away from BS 476 affect penetration seals in Westwood?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Is colour matching possible?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
What do you charge?
Every job gets its own fixed quote. For yours, ring 01277 525 020 or send photos by email with a description of the work.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Also in Westwood
Signs you need fire stopping in Westwood
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps, and the wrong product can split as a result. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Common reasons buildings call us in:
- Openings left by services added after handover
- Hidden openings found during inspections
- Penetration schedules that need working through
- Non-fire-rated filler around services
Hospital estates such as Queen Elizabeth The Queen Mother Hospital (0.7 miles north of Westwood) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- The terms of the workmanship guarantee
- What level of public liability insurance do they hold?
- Do they follow the manufacturer’s priming guidance?
Service penetrations in Westwood buildings
At about 65 miles from central London, Westwood is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. There are six care or nursing homes within about 2 miles of Westwood. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail.
Halls and meeting rooms at places like Parish Church of St John the Baptist sometimes gain new services, and any compartment wall crossed needs the specified seal. In a hotel such as Former 'Man Of Kent' Temperance Hotel (1.2 miles north of Westwood), new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Westwood is about 1 mile south of Margate, in Kent. Across the CT9 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 931 places across Kent fall within our area, Westwood among them. Sites around London have their own page, about 65 miles away.
We take on service penetrations across the CT9 and CT10 postcode area, for business premises of every kind. If your site is on Leo Road, Nash Road and Luna Road or close by, we can quote for service penetrations. You will find Westwood on or near the A254. Nearby places we also cover include Flete (1 mile west), Haine (1 mile south), Margate (1 mile north), Newington (1 mile south) and Garlinge (2 miles north-west). Nearby towns on our patch include Canterbury (15 miles south-west), Whitstable (15 miles west), Deal (10 miles south), Herne Bay (11 miles west), Walmer (11 miles south) and Wincheap (15 miles south-west).
What’s near Westwood
Locally, jobs take us to sites close to Hartsdown Academy and The Orb pub. Westwood’s nearest station is Margate station, roughly 1.4 miles north-west. A little further out are Public Library & Museum (Camborne) (1.4 miles north) and Queen Elizabeth the Queen Mother Hospital (0.7 miles north). For a walk, there’s Sandwich and Pegwell Bay.
Surface by surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes. We confirm material and size first and tell you if sealant isn’t the right product.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area.
On site: what to expect
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before we move to the next. Work in places the size of Westwood is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Tell us what induction or permit system the site runs
- Agree which areas must stay open
- Share the asbestos register for older buildings
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.
Read more
Why deal with it now?
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, so it makes sense to get it right first time. In a smaller place such as Westwood, getting a contractor back for a second visit takes time, so it’s worth dealing with every failing joint at once.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why choose Mastic Doctor in Westwood
- Our applicators hold CSCS cards
- Fully insured
- 12 months’ guarantee on every job
- A Constructionline member, so easy to vet
Take a look at what affects the cost or our accreditations.
What we can’t put right
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Writing the fire-stopping specification
- Construction that lacks the fire resistance the seal relies on
- Approving the work on behalf of building control
If you are not sure, just call 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations