Fire stopping in Garlinge
Need fire stopping in Garlinge? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Service penetrations left open after M&E works
- Expanding foam used as fire stopping
- Open linear gaps along the top of fire-resisting walls
Fire stopping for Garlinge sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What the job involves on each surface
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed and the installation has to fit inside those limits.
How we handle fire stopping in Garlinge
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. We work on cable penetrations, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and the failures we’re asked to look at most are improvised or mixed-product fire seals and damaged fire seals in risers and voids. Most enquiries from Garlinge start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Around smaller places like Garlinge, many commercial buildings are conversions or extensions of older ones, so the wall or floor a service passes through isn’t always what the drawings assume. We match the product to the substrate and service, and say so if a collar, wrap or batt is the specified item.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Garlinge (CT9, CT8)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
Can you work on a hospital site such as Queen Elizabeth The Queen Mother Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Will you work in a care home in Garlinge without moving residents out?
Yes. We agree rooms and times with the manager and work a few areas at a time. Noise and disruption are kept to a minimum.
How do I request a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or email us. Include photographs or drawings if you have them.
Can you tell us what fire stopping our building needs?
No, that isn’t our role. With the designer’s details in hand, we can price the sealant elements.
How many days will you need on site?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Site staff or a sealant specialist?
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
What affects the price in Garlinge
Quotes vary with the job. It mainly depends on:
- Whether old sealant has to be cut out first
- The total length or number of joints
- The product specified
- Location, for remote and island sites
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote once you have the details.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- Whether an asbestos survey exists
- The product your specification calls for
- Whether the building will be occupied during the work
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or email us.
Common problems we fix in Garlinge
Openings in fire-resisting walls usually appear when services are added or changed. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
These are often picked up first by site or facilities staff:
- Fire sealant pulled out of the opening
- Unsealed openings around new pipes and cables
- Non-fire-rated filler around services
- Improvised or mixed-product fire seals
At a college such as TOPS Vocational College (1.6 miles east of Garlinge), checking penetration seals after summer M&E works is good practice.
What to look for in a quote
- Whether primer will be used where the manufacturer specifies it
- What the guarantee covers, and for how long
- Will failed sealant be removed rather than covered?
- Whether their applicators hold CSCS cards
Why act early in Garlinge
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these and the building feels the difference. For buildings in places like Garlinge, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
Why clients in Garlinge choose us
- One number for every site we cover
- Old sealant cut out, never sealed over
- A Constructionline member, so easy to vet
- CSCS-carded applicators
Read what affects the cost or our accreditations and insurance.
Also in Garlinge
Compartments and services around Garlinge
The 2 miles around Garlinge include five care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. Garlinge lies roughly 63 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
Hotels like Hussar Hotel, under half a mile to the north-west of Garlinge, are refurbished in phases, and each phase can open up compartment walls. On a hospital site such as Queen Elizabeth The Queen Mother Hospital (1.4 miles east of Garlinge), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Garlinge is about 1 mile west of Margate, in Kent. Across the CT9 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Garlinge is one of 931 places we cover in Kent for service penetrations. For work in that direction, see our London page, about 63 miles away.
Anyone looking for fire stopping in CT9 and CT8 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on High Street, Bridge Road and Caxton Road or close by, send details and we’ll quote for service penetrations. Nearby places we also cover include Westbrook (1 mile north-east), Westgate-on-Sea (1 mile west), Flete (1 mile south-east), Margate (1 mile east) and Westwood (2 miles south-east). Bigger towns within reach include Canterbury (14 miles south-west), Ramsgate (4 miles south-east), Broadstairs (3 miles east), Whitstable (14 miles west), Deal (11 miles south) and Herne Bay (10 miles west).
Local landmarks in Garlinge
In Garlinge, that means premises near Hartsdown Academy. The closest station to Garlinge is Margate station, about 0.8 miles north-east. Other landmarks nearby include Westwood Cross (2.2 miles south-east) and Margate Old Town Local History Museum (1.3 miles north-east). Green spaces nearby include Sandwich and Pegwell Bay.
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If neighbouring businesses or buildings around Garlinge need work too, visits can be combined. Tell us your site hours and we’ll plan around them.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Make sure the joints can be reached
- Tell us what induction or permit system the site runs
- Send any specification or drawings in advance
Request a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or send details through our quote form.