Fire-rated sealing and fire stopping in Well, Hampshire
Fire-rated and intumescent sealing of service penetrations and linear gaps across Well, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Unsealed joints where partitions meet the slab
- Seals disturbed by maintenance and left open
- Fire-rated sealant that has cracked or shrunk back
Fire stopping for businesses in Well
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For a building around Well, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Arrange parking or a loading space
- Tell us your opening times and when work is allowed
- Tell us which areas need to stay in use
Quotes
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, phone 01277 525 020 or email the details over.
Read more
Fire stopping for commercial buildings in Well
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you are dealing with fire-rated sealant that has cracked or shrunk back and builders’ foam or ordinary silicone in compartment walls, we can help, whatever the surface. A specialist sealant contractor works differently from a general builder: on jobs in Well, preparation and product choice get the time they need.
For a smaller site near Well, we plan to do all the penetrations in one go, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Well (RG29)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Look above ceilings when tiles are lifted for other jobs
- Record which product was used where
- Foam or ordinary sealant is never a fire-seal repair
- Report damaged or disturbed seals as soon as they’re spotted
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and installation follows the programme.
Well: questions and answers
Is a hospital such as Spire Clare Park Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will you plan work around the academic year at somewhere like University for the Creative Arts?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Are you members of a third-party fire-stopping installer scheme?
No. We don’t hold a third-party fire-stopping installer certificate. Our credentials are CHAS accreditation, Constructionline membership and CSCS-carded applicators, and we are fully insured. If your contract requires third-party installer certification, we’re not the right fit for that package.
Is colour matching possible?
It depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
What’s the quickest route to a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
When to call us in Well
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
What tends to prompt an enquiry:
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
- Seals that don’t match their tested detail
- Unsealed openings around new pipes and cables
Offices at parks like Bentley Business Park, 2.2 miles to the south-east of Well, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Comparing quotes
- How the joint faces will be prepared and primed
- What site paperwork they can supply
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What level of public liability insurance do they hold?
Leave it or put it right?
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme. Converted and older buildings near places like Well tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- CHAS accredited contractor
- Failed material removed, not covered up
- Over 20 years of commercial sealing
- Specification-led, product-correct work
See what affects the cost and our accreditations.
Nearby places to Well
Other services in Well
Quoting for work in Well
These are the things that shape the price:
- Backing rod, priming and other preparation
- Working within restricted access windows
- Induction, permit and paperwork requirements
- Specialist products, such as fire-rated or hygienic sealants
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
Sending details for a quote
To price the job accurately, we need a clear picture of the site. Send us:
- Asbestos survey details if the building is older
- Specification clauses that apply
- Any dates the work must fit around
- Photos of the joints, close up and from further back
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Fire-rated sealing for Well buildings
In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Well has two care or nursing homes no more than 2 miles away. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product.
In a school such as Lord Wandsworth College, fire-rated sealant goes in around service penetrations where it is specified. Hospital estates such as Spire Clare Park Hospital, 2.9 miles east of Well, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Well is about 5 miles west of Farnham, in Hampshire. We send applicators to Well for service penetrations. Our Hampshire coverage takes in 723 places. There’s a separate page for Reading, about 16 miles away.
We take on service penetrations across the RG29 postcode area, whatever the building. Sites close to Well are covered too, including Long Sutton (1 mile west), South Warnborough (2 miles west), Odiham (3 miles north), Broad Oak (3 miles north) and North Warnborough (4 miles north-west). Nearby towns on our patch include Basingstoke (9 miles north-west), Farnborough (8 miles north-east), Fleet (5 miles north-east), Aldershot (7 miles east), Alton (5 miles south-west) and Petersfield (14 miles south).
Landmarks near Well
The closest station to Well is Bentley (Hampshire) station, about 2.9 miles south-east of the centre. Other landmarks nearby include Fleet Community Hospital (5.8 miles north-east) and Barley Pound (2.2 miles east). Green spaces nearby include Holybourne Hill and Dogmersfield Lake.
General trades versus a specialist
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.