Fire-rated sealing and fire stopping in Broad Oak, Hampshire
Need fire stopping in Broad Oak? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire-rated sealant that has cracked or shrunk back
- Snag lists that include open service penetrations
- Fire stopping installed outside its tested range
Fire stopping in Broad Oak
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
About our fire stopping in Broad Oak
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. We work on pipe penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors, and the failures we are asked to look at most are seals disturbed by maintenance and left open and improvised or mixed-product fire seals. Most enquiries from Broad Oak start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places like Broad Oak, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Where
- Broad Oak (RG29)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Commercial clients in Broad Oak
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Service penetrations in Broad Oak buildings
At about 39 miles from central London, Broad Oak is within reach of the capital. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. Broad Oak has a number of hotels close by, all within 2 miles. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
For a hospital such as Fleet Community Hospital, which lies north-east of Broad Oak, penetration sealing is usually phased ward by ward, with infection-control rules agreed first. Hotels such as The George Hotel (to the south-west of Broad Oak) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Broad Oak is about 4 miles west of Fleet, in Hampshire. We send applicators to Broad Oak for service penetrations. We work across 723 places in Hampshire, from busy centres to rural villages. For work in that direction, see our Reading page, about 13 miles away.
Commercial sites across RG29 are covered. Nearby places we also cover include Odiham (1 mile south-west), North Warnborough (1 mile west), Warnborough Green (2 miles west), Winchfield (2 miles north-east) and Greywell (2 miles west) for service penetrations. Nearby towns on our patch include Basingstoke (8 miles west), Farnborough (7 miles east), Fleet (4 miles east), Aldershot (7 miles east), Alton (8 miles south) and Yateley (7 miles north-east).
Around Broad Oak
Around Broad Oak, our work takes us to commercial buildings near The Waterwitch pub and Robert May's School and the streets around them. The closest station to Broad Oak is Winchfield station, roughly 1.8 miles north of the centre. Nearby you will also find West Green House Agricultural Museum (2.9 miles north) and Hart Shopping Centre (3.8 miles east). Not far away are Fleet Pond Nature Reserve and Tundry Hill.
Do you need fire stopping in Broad Oak?
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
Clients normally get in touch after noticing something like this:
- Improvised or mixed-product fire seals
- Fire sealant pulled out of the opening
- Open linear gaps along the top of fire-resisting walls
- Damaged fire seals in risers and voids
On a site such as Murrell Green Business Park, 2.1 miles north of Broad Oak, every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- The terms of the workmanship guarantee
- Health and safety accreditation such as CHAS
Your questions answered
Is hospital work, at somewhere like Fleet Community Hospital, something you do?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you seal around new services in a hotel near Broad Oak?
Yes. We install fire-rated and intumescent sealant where it is specified. Each seal follows the tested detail, and rooms are done in turn.
Who decides which product is used?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
What do you charge?
It depends on the job: quantities, access, the product and any phasing. Call for a quote.
Can you fit around our working hours?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Plastic pipes whose detail calls for a collar or wrap
- Deciding what a wall or floor needs, which belongs to the designer
- Issuing fire ratings or certificates for seals
If you’re not sure, just give us a call on 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Service gaps in risers
Nearby places to Broad Oak
More services for Broad Oak
How a job runs
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. For a building around Broad Oak, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Let building users know which areas are affected
- Share your working hours and any access restrictions
- Arrange parking or a loading space
Get a fixed quote
For a fixed quote, call the office on 01277 525 020 or email a schedule or drawings with the site address and an outline of the work. Our quote form is another easy route.
Advice
Different surfaces, different methods
Drylining partitions
Plasterboard partitions are tested as a specific construction. We check that the product’s detail covers that partition type and board thickness.
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.