Fire-rated sealing and fire stopping in Wapping, Greater London
Looking for fire stopping in Wapping? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Seals disturbed by maintenance and left open
- Head-of-wall gaps with no fire seal
- Hidden openings found during inspections
Fire stopping near Wapping
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Wapping
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. We work on linear gaps at wall heads, service gaps in risers and cable penetrations, and the failures we are asked to look at most are hidden openings found during inspections and unsealed openings around new pipes and cables. Facilities teams, main contractors and managing agents in Wapping tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Fit-outs and M&E works in London buildings often leave service penetrations open behind ceilings and in risers. If sealant is the specified product we fit it to its tested detail, and if the detail needs something else, you will hear it from us.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Wapping (E1, E1W, SE16)
- Wider area
- Greater London
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. The ULEZ covers the whole of Greater London, and parking near a job is rarely simple. Let us know about any on-site parking or loading arrangements when you send the job details.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Send any specification or drawings in advance
- Point out parking and an unloading spot
- Let us know about inductions and permits
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
Read more
What affects the price in Wapping
There’s no standard rate for sealant work, because every site is different. What we take into account:
- How much existing material needs removing
- The size and state of each joint
- Quantities, in metres or numbers
- Travel to remote or island sites
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
A good diagnosis starts with the right details. Tell us:
- Your programme or deadline
- Rough lengths or quantities, or drawings if you have them
- What the building is and how it’s used
- Any specification or named product
To get a fixed quote, ring 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Different surfaces, different methods
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, with no gaps along the run.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits.
Aftercare for building managers
Cleaning and maintenance staff play a part too. Pass these on to them:
- Flag new cables with no seal around them
- Don’t let anyone top up a fire seal with the wrong product
- Arrange inspection before areas are covered up
- Agree the fire-stopping specification before services go in
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match.
Site staff or a sealant specialist?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Building owners, agents and FMs in Wapping
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
Towns and villages near Wapping
What else we do in Wapping
Fire-rated sealing for Wapping buildings
The 2 miles around Wapping include nine care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
On a hospital site such as Royal London Hospital, 0.7 miles north of Wapping, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. Residences at universities like Northeastern University London (to the west of Wapping) have compartment walls that must be resealed whenever services change. For a building at a site such as Princes Court Business Centre, which lies north-east of Wapping, a check of penetration seals after each fit-out is good practice.
Wapping is about 1 mile south-east of Whitechapel, in Greater London. Businesses, contractors and managing agents in Wapping use us for work on service penetrations, as part of our coverage of Greater London. Wapping is one of 764 places in Greater London on our list.
We take on service penetrations across the E1, E1W and SE16 postcode area, for business premises of every kind. For a building on West Lane, Tunnel Road and Glamis Road or nearby, send details and we’ll quote for service penetrations. Main routes into Wapping include the A101 and A1210, which helps when planning parking and deliveries for the job. Nearby places we also cover include St George in the East (1 mile north-west), East End of London (1 mile north-east), Shadwell (1 mile east), Whitechapel (1 mile north-west) and Ratcliff (1 mile east). A short drive away, we cover City of Westminster (4 miles west), Marylebone (4 miles west), Kensington (6 miles west), St Pancras (3 miles north-west), Walthamstow (6 miles north) and Hampstead (6 miles north-west).
What’s near Wapping
In Wapping, that means premises near Town of Ramsgate pub, William Curtis Ecological Park and Bishopsgate Institute Special Collections and Archives. Also close by are St Mary-at-Hill (1 mile west), Mulberry School for Girls (0.5 miles north) and Hermitage Primary School (less than half a mile south-west). There’s a railway station in Wapping itself: Wapping station. Well-known places in the area include The Royal London Hospital (0.7 miles north) and Tower of London (0.7 miles west). Open spaces near Wapping include St. James's Park Lake and Tower Hill.
Questions about Wapping
Can you work in a London building with booked loading and goods-lift slots?
Yes. Booked loading bays, goods lifts and permit-to-work systems are normal for London jobs. Say when the building is occupied and when it’s quiet, and we will plan accordingly.
Can you seal penetrations in a hotel in Wapping after a refit?
Yes, where fire-rated sealant is the specified product. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards.
Is Wapping in your area?
Yes. Wapping is in our area and the rest of Greater London, within our coverage of Greater London, South East England and Scotland. For a quote, ring 01277 525 020 or email the details over.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.