Fire-rated sealing and fire stopping in Tyler Hill, Kent
Planning work on a service penetration in Tyler Hill? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Snag lists that include open service penetrations
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
Fire stopping for Tyler Hill sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Tyler Hill
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and cable penetrations, and what we are called in for most is damaged fire seals in risers and voids and non-fire-rated filler around services. Whoever orders the work in Tyler Hill, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Barn and farm-building conversions near places like Tyler Hill often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
Our workmanship is guaranteed for 12 months, in Tyler Hill as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Tyler Hill (CT2)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Common problems we fix in Tyler Hill
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it.
Things that typically lead to an enquiry:
- Openings left by services added after handover
- Fire stopping installed outside its tested range
- Fire seals cut back for extra cables and never reinstated
- Expanding foam used as fire stopping
Hospital estates such as Saint Martin's Hospital, 2.7 miles to the south-east of Tyler Hill, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
What your quote should include
- Whether primer will be used where the manufacturer specifies it
- The named product and why it was chosen
- Will RAMS and insurance details be available?
- Who will actually carry out the work
Questions we are asked in Tyler Hill
Do you work on fire-rated sealing in hotels in Tyler Hill?
Yes. We install fire-rated and intumescent sealant where it is specified. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
What does the BS 476 change mean for fire-rated sealant in Tyler Hill?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, which many sites require.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Who decides which product is used?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Is Tyler Hill in your area?
Yes. Tyler Hill is in our area. To discuss a job, phone 01277 525 020 or email the details over.
Compartments and services around Tyler Hill
Tyler Hill lies roughly 52 miles out from central London. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
Residences at universities like University of Kent (0.9 miles south of Tyler Hill) have compartment walls that must be resealed whenever services change. Workshops and IT rooms at colleges like Canterbury College (to the south of Tyler Hill) are re-serviced often, leaving penetrations to seal.
Tyler Hill is about 2 miles north of Canterbury, in Kent. Our applicators travel to Tyler Hill for work on service penetrations, handled exactly as we handle every other area. We work across 931 places in Kent. There’s a separate page for London, about 52 miles away.
We cover the CT2 postcode districts. Buildings on St Johns Crescent, Link Road and Summer Lane are within our area for service penetrations. If your building is just outside Tyler Hill, we cover Hackington (1 mile south-east), Blean (1 mile west), Honey Hill (2 miles west), Radfall (2 miles north) and Denstroude (2 miles west). Bigger towns within reach include Ashford (15 miles south-west), Margate (15 miles east), Dover (15 miles south-east), Sittingbourne (15 miles west), Ramsgate (15 miles east) and Whitstable (3 miles north-west).
Around Tyler Hill
We work on buildings around Tyler Hill Meadow, The Archbishop's School and St Edmund's School, among other places. The closest station to Tyler Hill is Canterbury West station, roughly 1.6 miles south. A little further out are Whitefriars Shopping Centre (2.2 miles south) and Canterbury Castle (2.2 miles south). Green spaces nearby include Blean Woods RSPB Reserve.
What sealant work can’t fix
Some faults sit outside our scope, and we say so rather than covering them up:
- Signing off or certifying a building’s fire stopping
- Fire risk assessments, a job for a competent assessor
- Walls or floors that aren’t fire-resisting to begin with
If in doubt, give us a call on 01277 525 020 or email the details over and we will say what we think.
What we seal
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
What sets the cost
To price the job, we consider:
- Induction, permit and paperwork requirements
- Travel to remote or island sites
- How much there is to seal
- Whether the work must be split into stages
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Details that help us quote
A good diagnosis starts with the right details. Let us know:
- The postcode of the building
- Photos of the joints, close up and from further back
- Asbestos survey details if the building is older
- Any specification or named product
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or ring 01277 525 020 or email drawings and photos to discuss it first.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a building around Tyler Hill, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
What we need from you
- Flag any permit to work we will need
- Send your site hours and access windows
- Send any specification or drawings in advance
Get a fixed quote
To get a fixed quote, phone 01277 525 020 or email drawings and photos. Our quote form is another easy route.
Related advice
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Towns and villages near Tyler Hill
Also in Tyler Hill
What the job involves on each surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest against the detail’s limits.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter and we work within those limits.