Expansion joint sealing in Tyler Hill
Work needed on a movement joint in Tyler Hill? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Torn sealant in brick or block movement joints
- Arrises breaking up along floor joints
- Expansion joints filled with dirt and stones
Expansion joint sealing for Tyler Hill sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Tyler Hill: the local picture
Rainfall across the South East, Tyler Hill included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. The 3 miles around Tyler Hill take in at least three named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
At places like Canterbury Retail Park, 1.8 miles south-east of Tyler Hill, joints are sealed a section at a time so operations carry on. Retail parks like Maybrook Retail Park, 1.8 miles south-east of Tyler Hill, have long runs of car park and yard joints taking daily traffic. Hospitals like Saint Martin's Hospital, 2.7 miles south-east of Tyler Hill, have multi-storey or surface car parks whose joints carry vehicles round the clock.
Tyler Hill is about 2 miles north of Canterbury, in Kent. We send applicators to Tyler Hill for movement joints, handled exactly as we handle every other area. 931 places across Kent fall within our area, Tyler Hill among them. For work in that direction, see our London page, about 52 miles away.
Commercial sites across CT2 are covered for movement joints. For a building on St Johns Crescent, Link Road and Summer Lane or nearby, send details and we’ll quote for movement joints. Close to Tyler Hill, our area also takes in Hackington (1 mile south-east), Blean (1 mile west), Honey Hill (2 miles west), Radfall (2 miles north) and Denstroude (2 miles west). Bigger towns within reach include Ashford (15 miles south-west), Margate (15 miles east), Dover (15 miles south-east), Sittingbourne (15 miles west), Ramsgate (15 miles east) and Whitstable (3 miles north-west).
Local landmarks in Tyler Hill
Around Tyler Hill, our work takes us to commercial buildings near Tyler Hill Meadow, The Archbishop's School and St Edmund's School. For rail, the closest station is Canterbury West station, roughly 1.6 miles south of the centre. Other landmarks nearby include Whitefriars Shopping Centre (2.2 miles south) and Canterbury Castle (2.2 miles south). Not far away are Blean Woods RSPB Reserve.
About our expansion joint sealing in Tyler Hill
For movement joints in Tyler Hill, photos and approximate lengths are the best start. We’ll come and look where photos don’t show enough before issuing a fixed quote. You can also speak to us on 01277 525 020 or email us to talk the joints through. Site teams most often ask us about chipped joint edges on forklift routes and damp inside where a wall movement joint has failed, on brickwork movement joints, blockwork control joints and precast concrete panel joints. Looking for mastic applicators who cover Tyler Hill? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
For a site near Tyler Hill, measurements and photos up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Tyler Hill (CT2)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
How the quote is worked out
These are the things that shape the price:
- Quantities, in metres or numbers
- The site’s rules and procedures
- Travel to remote or island sites
- Whether old sealant has to be cut out first
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you are ready.
Details that help us quote
There’s no need for a formal survey. A few details are enough to get going:
- A wide shot and a close-up of the area
- Rough lengths or quantities, or drawings if you have them
- Whether the building will be occupied during the work
- Specification clauses that apply
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Nearby places to Tyler Hill
Also in Tyler Hill
Our process
When we get to site, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. Rural sites near Tyler Hill may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Before we start on site
- Tell staff and tenants when we will be in
- Let us know about inductions and permits
- Tell us which areas need to stay in use
Getting a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or speak to us on 01277 525 020 or email drawings and photos to discuss it first.
Related advice
FAQs: Tyler Hill
Would you work within a site like Saint Martin's Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Will you take on work at estates like Maybrook Retail Park, close to Tyler Hill?
Yes. We cover Tyler Hill and the area around it, including industrial estates, business parks and retail parks such as Maybrook Retail Park. To start, just call 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Can a joint be sealed if the edges are broken?
Sealant needs sound faces to bond to, so we’ll tell you if the edges need repairing before sealing. Where it’s visible beforehand, we’ll say so when we quote.
Do you guarantee expansion joint work?
The workmanship is guaranteed for 12 months from sign-off, and we’re fully insured for public liability. Regular sweeping and inspection help the joints last.
What the job involves on each surface
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. A sealant with the right movement class is chosen, and we’ll confirm the colours available for the specified product.
Maintenance after handover
Cleaning and maintenance staff play a part too. Share these points with them:
- Look over external and deck joints after a hard winter
- Inspect movement joints alongside other routine building checks
- Keep product details with the building records for the next reseal
- Reopen bays and walkways only after the stated cure time
Snow ploughs and scrapers catch on joint lines. Lifting the blade at each joint avoids tearing the bead, and it’s worth checking joints once the cold weather has passed.
Once debris packs a failed joint, the structure has nowhere to expand. The arrises crack and break away under the load and the reseal becomes an edge repair as well. A sound seal keeps the joint working.
Why act early in Tyler Hill
Resealing is usually the answer, not replacing the element. Where the edges are sound, cutting out and resealing is enough. We’ll flag where edges need repair before sealing. One visit to deal with every failing joint makes more sense than several trips to a place like Tyler Hill. Send photos of each area and we will quote for the lot.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Why appoint us
- Health and safety: CHAS accredited
- Sealing commercial buildings since 2005
- One phone line for London, the South East and Scotland
- Fully insured
Read how commercial sealant jobs are priced and our accreditations and insurance.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.